• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.750-757
• /
• 2002

Photosensitive sol solution을 이용한 self pattern된 박막은 photoresist/dry etching process에 비해 박막의 제조과정이 간단하다는 장점을 가지고 있다. 이 연구에서는 photosensitive sol solution을 이용하여 spin coating법에 의해 $Sr_{0.9}Bi_{2.1}Ta_2O_9$의 조성을 갖는 강유전체 박막을 제조하였으며 출발원료는 $Sr(OC_2H_5)_2,\;Bi(TMHD)_3$와 $Ta(OC_2H_5)_5$를 사용하였다. SBT 박막에 UV 노광시간을 증가시킴에 따라 M-O-M 결합이 생성되면서 metal ${\beta}$-diketonate의 UV 흡수 피크 강도는 감소되었고 SBT 박막에 UV 조사에 따른 용해도 차이가 생기면서 fine patterning을 얻을 수 있었다. 또한 UV가 조사된 SBT 박막의 강유전 특성이 UV가 조사되지 않은 것보다 우수하였다.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.214-225
• /
• 2000

The purpose of this study was to investigate the effects of investing conditions on the marginal discrepancy of conical telescope outer crown with Co-Cr-Ti alloy(Dentitan) and to compare the marginal discrepancy and the retention force of outer crowns using different pattern materials(plastic foil, casting wax, pattern resin). To evaluate the effects of investing conditions on the marginal discrepancy, patterns with plastic foil were invested under three different liquid/powder ratio conditions using phosphate bonded investment(Univest-nonprecious): standard, 10% decreased and 10% increased. At each liquid/powder ratio condition, metal ring was lined with single or double layers of ceramic ring liner. The marginal discrepancy of outer crown at different investing conditions was measured by ${\times}100$ compact measuring microscope(STM5, Olympus, Japan). For measurement of the marginal discrepancy and the retention force of outer crown using different pattern materials, the investing condition of 10% decreased liquid/powder ratio and double layers of ring liner was selected because this investing condition resulted in the best fit of outer crown. Marginal discrepancy was measured in the same way above and retention force on universal testing machine. Under the conditions of this study, the following conclusions were drawn: 1. The thickness of ring liner had more influence on the marginal discrepancy of outer crown than the liquid/powder ratio, and the acceptable marginal fitness could not be expected at the investing condition directed by investment manufacturer 2. There were no differences in the marginal discrepancy of outer crown among three different pattern materials(P>0.05). 3. Casting wax showed the greatest retention force(1640g) of outer crown, followed by pattern resin(1110g), plastic foil(820g). However, there was no significant difference between plastic foil and pattern resin(P>0.05). 4. Plastic foil showed the least variation in marginal discrepancy and retention force.

• 한국레이저가공학회지
• /
• 제18권4호
• /
• pp.17-22
• /
• 2015

In this paper, ablation rate of $Al_2O_3$ ceramics by femtosecond laser fluence is derived with experimental method. The automatic three axis linear stage makes laser optics to move with high spatial resolution. With 10 times objective lens, minimal pattern width of $Al_2O_3$ is measured in the focal plane. Ablated surface area is shown as linear tendency increasing number of machining times with various laser power conditions. Machining times is most sensitive condition to control $Al_2O_3$ pattern width. Also, the linear increment of pattern width with laser power change is investigated. In high machining speed, the ablation volume rate is more linear with fluence because pulse overlap is minimized in this condition. Thermal effect to surrounding medium can be minimized and clean laser process without melting zone is possible in high machining speed. Ablation volume rate decelerates as increasing machining times and multiple machining times should be considered to achieve proper ablation width and depth.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.560-565
• /
• 2003

방전 플라즈마 소결법(SPS: Spark Plasma Sintering)을 이용하여 800~100$0^{\circ}C$의 낮은 소결 온도에서 완전 치밀화를 이루는 M-doped ZnO를 (M=Al, Ni) 제조하여 그 소결 특성과 미세구조를 분석하였다. 전자현미경 분석 결과, NiO의 첨가는 ZnO 결정격자와의 고용체 형성을 촉진시키고 결정립 성장을 유발하였고, A1$_2$O$_3$는 순수한 ZnO 소결 시 나타나는 입계에서의 증발현상을 제어하고, 이차상 형성을 통하여 결정립 성장을 억제함을 확인할 수 있었다 NiO와 $Al_2$O$_3$를 동시에 첨가한 시편이 가장 우수한 미세구조가 형성됨을 확인하였고, SEM-EBSP (Electron Back-scattered Diffraction Pattern) 분석 결과 또한 우수한 결정립계 분포를 가지고 있음을 확인하였다. 이러한, 소결체의 우수한 미세구조적 특징은 carrier 농도 증가에 따른 전기 전도도와 증가 및 phonon scattering 효과에 의한 열전도도의 감소 효과를 유발하여 ZnO의 열전 특성을 향상시키리라 사료된다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.359-363
• /
• 2013

Silicon carbide and its composites are being considered as a nuclear fuel cladding material for LWR nuclear reactors because they have a low neutron absorption cross section, low hydrogen production under accident conditions, and high strength at high temperatures. The SiC composite cladding tube considered in this study consists of three layers, monolith CVD SiC - $SiC_f$/SiC composite -monolith CVD SiC. The volume fraction of SiC fiber and surface roughness of the composite layer affect mechanical and corrosion properties of the cladding tube. In this study, various types of SiC fiber preforms with tubular shapes were fabricated by a filament winding method using two types of Tyranno SA3 grade SiC fibers with 800 filaments/yarn and 1600 filaments/yarn. After chemical vapor infiltration of the SiC matrix, the surface roughness and fiber volume fraction were measured. As filament counts were changed from 800 to 1600, the surface roughness increased but the fiber volume fraction decreased. The $SiC_f$/SiC composite with a bamboo-like winding pattern has a smaller surface roughness and a higher fiber volume fraction than that with a zigzag winding pattern.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.55-60
• /
• 2018

In this study, quantum dots composed of $Mn^{2+}$ doped ZnS core and ZnS shell were synthesized using MPA precursor at room temperature. The ZnS: Mn/ZnS quantum dots were prepared by varying the content of MPA in the synthesis of ZnS shells. XRD, Photo-Luminescence (PL), XPS and TEM were used to characterize the properties of the ZnS: Mn/ZnS quantum dots. As a result of PL measurement using UV excitation light at 365 nm, the PL intensity was found to greatly increase when MPA was added at 15 ml, compared to the case with no MPA; the PL peaks shifted from 603 nm to 598 nm. A UV sensor was fabricated by using a sputtering process to form a Pt pattern and placing a QD on the Pt pattern. To verify the characteristics of the sensor, we measured the electrical properties via irradiation with UV, Red, Green, and Blue light. As a result, there were no reactions for the R, G, and B light, but an energy of 3.39 eV was produced with UV light irradiation. For the sensor using ZnS: Mn/ZnS quantum dots, the maximum current (A) value decreased from $4.00{\times}10^{-11}$ A to $2.62{\times}10^{-12}$ A with increasing of the MPA content. As the MPA content increases, the PL intensity improves but the electrical current value dropped because of the electron confinement effect of the core-shell.

• 한국전자파학회논문지
• /
• 제23권8호
• /
• pp.958-966
• /
• 2012

본 논문에서는 저온 동시 소성 세라믹(Low Temperature Co-fired Ceramic: LTCC) 기술을 사용하여 블루투스와 WiFi에서 동작하는 무선 전단부 모듈(RF Front-end Module)을 설계, 구현하였다. 무선 전단부 모듈은 2.4/5 GHz 대역 다이플렉서와 2 GHz 대역 발룬, 5 GHz 대역 발룬, 그리고 송 수신용 SPDT 스위치와 SP3T 스위치로 구성되어 있다. LTCC의 설계에 있어, 적층 구조의 특성으로 인해 발생되는 예상 기생 성분은 시뮬레이션을 활용하여 설계하였다. 제작한 무선 전단부 모듈은 내부 접지(inner ground) 3개 층을 포함하여 총 13개 패턴으로 구성되었으며, 무선 전단부 모듈의 크기는 $3.0mm{\times}3.7mm{\times}0.66mm$이다.

• 한국콘텐츠학회논문지
• /
• 제20권12호
• /
• pp.671-680
• /
• 2020

오늘날 새로운 콘텐츠의 공예품을 개발하는 단계에서 트렌드(Trend)를 반영하지 않으면 마케팅에 성공할 수 없다. 트렌드는 일시적으로 왔다가 사라지는 소비자들의 니즈(needs)를 이끄는 원동력이기 때문이다. 현재의 시장은 끊임없이 변화하며 새로운 라이프 스타일의 독특한 추세를 원하고 있다. 이러한 잠재적 욕구의 경향을 떡살문양과 도자단지를 이용하여 부가 가치가 높은 인테리어 화병을 개발하는 것이 목적이다. 제작 방법은 첫 번째 떡살문 도구를 옹기 작업과정에 쓰인 토레미판 (덧살 새롭게 만든 용어)위에 각도를 다르게 하여 압인한다. 두 번째 물레로 원통을 만들어 외벽에 이중으로 덧살을 붙인 후 빠르게 회전하여 손으로 안에서 밖으로 밀어서 확장시킨다. 세 번째 압인 된 정적인 떡살 문양들을 빠른 속도에 의해 상하-좌우 해체 된 다양한 기하학적 문양을 실험하고 이렇게 개발 된 다양한 떡살 문양들을 단지 형태에 활용하여 부가가치가 높은 장식용 화병을 개발하는 것이 목적이다.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.299-306
• /
• 2011

Purpose: This study aimed to investigate the shear bond strength by manufacturing the veneering porcelain on the IPS e.max $ZirCAD^{(R)}$ zirconia core, using the layering technique and heat-pressing technique, and to evaluate the clinical stability by comparing to the conventional metal ceramic system. Methods: The Schmitz-Schulmeyer test method was used to evaluate the core-veneer shear bond strength of zirconia core ceramic(IPS e.max $ZirCAD^{(R)}$) and their manufacture recommended two veneering ceramic systems(IPS e.max $ceram^{(R)}$, IPS e. max $ZirPress^{(R)}$). A metal ceramic system(Bellabond $plus^{(R)}$, VITA $VM13^{(R)}$) was used as a control group for the two all ceramic system test groups. The maximum loading and shear bond strength was measured. The average shear strength(MPa) was analyzed with the one-way ANOVA and the Tukey's test(${\alpha}$=.05). The fracture specimens were examined using Microscope to determine the failure pattern. Results: The mean shear bond strengths(SD) in MPa were MBSB control 43.62(2.13); ZBSB 18.65(1.76); ZPSB 18.89(1.54). The shear strengths of the zirconia cores were not significantly different(P>.05). Microscope examination showed that zirconia specimens presented mixed failure, and base metal alloy specimens showed adhesive failure. Conclusion: There was no siginificant different between the layering technique and the heat pressing technique in the veneering methods on the zirconia cores. None of the zirconia core and veneering ceramics could attain the high bond strength values of the metal ceramic combination.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.313-316
• /
• 2009

A zinc borosilicate glass having a low softening temperature of $490^{\circ}C$ has been investigated as a protective layer for Ag patterns against chemical reactions with a $I^-/I_3^-$ electrolyte in dye-sensitized solar cells (DSSCs). A thick glass layer was prepared by the typical screen printing and firing processes to obtain a final thickness of ${\sim}5{\mu}m$. The chemical leaching performance of the glass layer in the electrolyte revealed that the reactive Ag pattern can be significantly protected by utilizing the low softening protective layer. The electrical resistance of the FTO-coated glass substrate was effectively maintained at a low value of ${\sim}27{\Omega}$ as long as the glass layer was well densified at a sufficiently high temperature of ${\sim}520^{\circ}C$. The transmittance of the layer was near 60%, depending on the firing temperature of the glass layer.