• 대한치과보철학회지
• /
• 제58권2호
• /
• pp.110-120
• /
• 2020

모든 과개교합을 가진 환자를 병적인 상태로 판단할 수는 없지만 전치부에 교합접촉이 불안정하거나, 전반적인 교합 부조화가 동반된다면 과개교합은 하악 전치에 대한 지속적인 마모와 정출을 일으킬 수 있다. 이 증례는 72세 남성환자로 상악과 하악의 전치가 잔존해 있지만 골격성 2급 부정교합으로 인하여 안정위 상태에서 교합접촉이 불가능하고 교합지지가 완전히 상실되어 수직고경의 증가가 필요한 환자였다. 이 증례는 보철 수복을 위해 수직고경의 증가가 필요한 경우로 수평피개를 더욱 심화시켜 교합의 부조화를 유발할 수 있기에 정밀한 진단을 통한 수직고경 증가량 결정이 필요하였다. 이 증례에서는 Dahl concept를 응용한 가철성 국소의치 보철물을 이용하여 안정적인 교합을 완성하였으며 적절한 치료 결과를 보였기에 이를 보고하고자 한다.

• 구강회복응용과학지
• /
• 제26권4호
• /
• pp.463-476
• /
• 2010

다수의 구치 상실로 인한 구치부 지지의 부족은 일차적으로 대합치의 정출 및 잔존치의 과도한 교합하중을 발생시킨다. 대합치의 정출은 교합평면의 부조화(reverse curve)와 보철수복공간의 부족을 일으킬 수 있다. 잔존치의 과도한 교합하중 역시 전치의 전방돌출이나, 잔존치의 급속한 마모를 일으켜 적절한 전방유도의 상실 및 교합의 부조화, 보철수복공간의 부족을 일으킬 수 있다. 이러한 환자의 경우, 치과의사는 현재의 교합수직고경이 적절한지의 여부를 판단한 후, 환자가 적응할 수 있는 범위 내에서 기능적, 심미적인 수직고경을 정하고, 반복재현 가능한 하악위에서 적절한 전방유도와 교합평면을 설정해야 한다. 본 증례에서는 구치부 상실 및 대합치의 정출, 그리고 잔존치의 심한 마모로 인하여 교합수직고경 및 교합평면이 붕괴된 환자의 완전구강회복 증례를 문헌 고찰과 함께 보고하고자 한다.

• 대한치과보철학회지
• /
• 제53권4호
• /
• pp.377-391
• /
• 2015

상하악 치열궁의 부조화는 3차원적인 교합의 문제를 일으키며 불안정한 교합접촉에 의해 교합평면의 붕괴와 다수의 치아 상실 및 저작기능의 감소가 발생할 수 있다. 치아 상실로 인한 구치부의 지지 상실과 상하악 치열궁의 부조화로 인한 불안정한 교합접촉 및 부적절한 전방유도를 갖는 경우, 교정치료를 동반한 보철치료를 통해 안정적인 교합접촉과 전방유도를 회복하고, 조화로운 교합관계로의 개선이 필요하다. 본 증례보고는 앞서 언급된 문제들이 복합적으로 나타난 환자를 치과보철과와 치과교정과의 협진을 통해 양호한 구강회복 결과를 얻었기에 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.72-81
• /
• 2024

구치부 지지 상실로 부적절한 교합을 보이는 환자를 전악 보철 수복하기 위해서는 적절한 교합수직고경의 증가와 중심위에서 안정된 교합을 나타내는 보철물의 제작이 필요하다. 본 증례는 대구치가 상실되고 치아 마모를 보이는 환자에서 임플란트 보철과 지르코니아 전부 전장관을 사용해 완전구강회복한 증례이다. 증가된 교합수직고경에의 적응 여부를 평가하기 위해 occlusal splint 및 임시 수복물이 사용됐으며, 임시 수복물의 전방 유도를 따르는 최종 보철물을 제작함으로써 안정된 교합 회복을 이룰 수 있었다.

• 구강회복응용과학지
• /
• 제19권4호
• /
• pp.257-268
• /
• 2003

The purpose of this study was to assess the loading distributing characteristics of implant prosthesis according to position and direction of load, under vertical and inclined loading using FEA analysis. The finite element model was designed according to standard fixture (4.1mm restorative component x 11.5mm length). The crown for mandibular first molar was made using UCLA abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction (loading condition B), 200N at the centric usp in a $15^{\circ}$ inward oblique direction (loading condition C), 200N at the in a $30^{\circ}$ inward oblique direction (loading condition D) or 200N at the centric cusp in a $30^{\circ}$ outward oblique direction (loading condition E) individually. Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment screw. The following results have been made based on this study: 1. Stresses were concentrated mainly at the ridge crest around implant in both vertical and oblique loading but stresses in the cancellous bone were low in both vertical and oblique loading. 2. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading than with the vertical loading. 3. An offset of the vertical occlusal force in the buccolingual direction relative to the implant axis gave rise to increased bending of the implant. 4. The relative positions of the resultant line of force from occlusal contact and the center of rotation seems to be more important. 5. The magnitude of the stress in the supporting bone, fixture and abutment screw was greater with the outward oblique loading than with the inward oblique loading and was the greatest under loading at the centric cusp in a $30^{\circ}$ outward oblique direction. Conclusively, this study provides evidence that bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. But it seems to be more important that how long is the distance from center of rotation of the implant itself to the resultant line of force from occlusal contact(leverage). The goal of improving implants should be to avoid bending of the implant.

• 대한치과교정학회지
• /
• 제21권2호
• /
• pp.399-418
• /
• 1991

This study was designed to evaluate the relationship of mandibular condylar position to overbite depth and compare the findings from transcranial radiographs and those, from individualized corrected tomographs in determination of condylar position. The subjects consisted of 20 control subjects (male 8, female 12), and 10 open-bite patients (male 3, female 7) and 23 deep-bite patients (male 17, female 6). The mean age was 23.3 years for the control group, 21.5 years for open-bite group, and 23.2 years for deep-bite group. Transcranial radiographys and individualized corrected tomographys in centric occlusion were taken from right and left temporomandibular joints of each sueject. The results were as follows. 1. In the 20 normal subjects showing no symptoms of TM disorder, the incidence of condylar retrusion was $27.5\%$, middle condylar position $60.0\%$, and anterior displacement $12.5\%$. 2. There was significant correlation between the bite depth and observed condylar position. 3. Only $45.2\%$ of the findings from transcranial radiographs coincided with those from individualized corrected tomographs in determining condylar position.

• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.77-86
• /
• 1993

The purpose of this study was to compare the sagittal condylar guidance obtained by the graphic method(pantographic tracing) with that produced by the positional method(check-bite). Ten adults who had normal occlusion and were free of TMJ dysfunction were selected, and the clutches were constructed. At first pantographic survey was performed and the articulator was adjusted with each pantographic recording. And then three protrusive check-bite were taken on the subjects using the polyether$(Lamitec^{(R)})$ on the buccal side of the posterior teeth without the interocclusal record method and the vericheck method was performed with each protrusive check-bite. Sagittal condylar guidances obtained by using the pantograph and Vericheck were compared and analyzed statistically. The results were as follows: 1. The average condylar guidance ankle at 4mm and 7mm from centric relation point on the pantograph $(35.9{\pm}1.10^{\circ},\;32.4{\pm}1.55^{\circ})$ was statisccally significant(P<0.01). 2. The average condylar guidance angle of the Vericheck was $27.0{\pm}3.43^{\circ}$. 3. The comparison of the right and left was not statistically significant in all group(P>0.05). 4. The comparison of pantograph and Vericheck was statistically significant in the right and left(P<0.001).

• 대한치과교정학회지
• /
• 제23권3호
• /
• pp.341-358
• /
• 1993

This study was investigated to evaluate the morphologic characteristics of deepbite tendency as multiple factors. The subjects consisted of 60 control subjects(male 25, female 35) and 137 deephite patients(68 male, 69 female). The deepbite group was composed of 4 subgroups(Class I 44, Class II div. 1 40, Class II div. 2 13, Class III 40). The mean age was 21.57 year for the control group 21 year for deepbite group lateral cephalograph in centric occlusion were taken, traced, and digitized for each subject. The statistically computerized analysis was carried out with SAS program. The results were as follows ; 1. In deepbite group, saddle angle is lesser than that of normal group. 2. The vertical dysplasia is prominent on anterior lower face and is closely related with mandibular form and inclination. 3. Without consideration of sagittal relationship, the dental factors such as curve of Spee, interincisal angle, U1 to upper lip length were prominent in the deepbite group. 4. Although there were individual variances in the perioral soft tissue profile, the lip presented more protruded pattern. 5. There was no significant difference in hyoid bone position and inclination between normal and deepbite group. 6. The multivariate discriminant analysis between normal and Class I deepbite group showed that curve of Spee, AB-MP angle, interincisal angle, articular agnle were critical in the determination of deepbite as multiple factors.

• 구강회복응용과학지
• /
• 제19권2호
• /
• pp.97-104
• /
• 2003

It is clinically important to determine the physiologic mandibular position as the therapeutic position of the patients who needs the oral rehabilitation and occlusal treatment. Several methods have been employed for the recording the mandibular position. The gothic arch tracer is one of methods to record the mandibular position. The purpose of this study is to record the border position, chewing position, and myocentric position using the newly developed intra oral tracer in 10 subjects with TMJ clicking sound and 10 subjects without TMJ clinking sound.. This study showed that newly developed intra oral tracer allowed clinician the determination of the treatment position on the same horizontal plate which can be used in the full mouth rehabilitation and occlusal treatments. There was no statistically significant difference between clicking group and nonclicking group in the distance of border position-chewing position and the distance of border position-myocentric centric position.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.129-145
• /
• 1991

The purpose of this study was to analyze the stresses and displacements of various esthetic restorations and abutment teeth. The finite element models of central incisor were divided into four groups according to the types of restoration. Three load cases were applied; 1) 45 degrees on the incisal edge, 2) horizontal force on the labial surface, and 3) 26 degrees diagonally on the lingual surface. Material property, geometry, and load conditions of each model were inputed to the two dimensional finite element program and stresses and displacements were analyzed. Results were as follows; 1. In the cases of porcelain fused gold ann and porcelain laminate venner, stresses were equally distributed in supporting abutment tooth. 2. The metal coping of porcelain fused gold u and collarless porcelain fused gold crown functioned as a good stress distributor. 3. When the horizontal load applied, the highest tensile and compressive stresses were seen in the cervical margin of restoration and the dentin of the abutment tooth. 4. The highest displacement of restoration was seen when load was applied at an mee of 26 degrees diagonally in lingual surface of tooth in centric occlusion. 5. The influence of loading direction on the stresses and displacements in the restoration was greater than that of various design. 6. The possibility of fracture was highest in porcelain jacket crown.