• 한국결정학회지
• /
• 제11권1호
• /
• pp.22-27
• /
• 2000

The structure of cis-(malonato)[(4R,5R)-4,5-bis(aminomethyl)-2-isopropyl-1,3-dioxolane]platinum(II) with a potent anticancer activity has been determined by the X-ray crystallographic method. Crystal data are as follows: Pt(C/sub 11/H/sub 20/N₂O/sub 6/), M/sub 4/=471.38, monoclinic, P2₁, a=7.112(1), b=33.615(3), c=7.135(1)Å, β=116.80(1)°, V=1522.6(3)Å, and Z=4. The two independent molecules with very similar structures are approximately related by pseudo two-fold screw axis symmetry, which makes the monolinic cell look like the orthorhombic cell with one molecule in the asymmetric unit and space group C222₁. The crystal packing mode is similar to that of the analogue with the dimethyl substituents instead of the isopropyl group. The Pt atom is coordinate to two O and two N atoms in a square planar structure. The six-membered chelate ring in the leaving ligand assumes a conformation intermediate between the half chair and the boat forms. The seven-membered ring in the carrier ligand assumes a twist-chair conformation and the oxolane ring assumes an envelope conformation. Crystal packing consists of the extensive hydrogen-bonding network in the two-dimensional molecular layers and weak van der Waals interactions between these layers.

• 한국식품영양과학회지
• /
• 제41권11호
• /
• pp.1554-1558
• /
• 2012

고창 복분자의 개별인정형 건강기능식품 기능성 원료로 개발하기 위하여 지표성분 표준화를 위한 ellagic acid의 분석법 설정과 분석법에 대한 밸리데이션을 실시하였다. 1% formic acid가 첨가된 water와 acetonitrile을 이동상으로 하고 Symmetry$^{(R)}$ (C18, $4.6{\times}250mm$, $5.0{\mu}m$) 칼럼을 사용하여 기울기용리(gradient elution) 방법으로 분석하였다. 본 연구에서는 분석법을 확립하고 분석법에 대하여 특이성, 직선성, 정확성과 정밀성 그리고 회수율에 대하여 확인하였다. Ellagic acid의 검량선은 $R^2=0.9996$으로 좋은 선형성을 보였으며 LLOQ와 LOD는 각각 $1{\mu}g/mL$와 $0.3{\mu}g/mL$였다. 일내와 일간 분석에서 상대표준편차(RSD)는 각각 2.28%와 2.84%미만으로 나왔다. 회수율 측정결과에서는 89.17~97.92%로 나왔고, RSD는 0.05~0.14%였다. 그러므로 HPLC를 이용한 ellagic acid의 분석법이 고창 복분자 추출물의 기능성원료 표준화를 위한 지표성분 분석을 위한 적합한 시험법임이 검증되었다. 본 시험법에 따라 분석한 고창 미숙과 복분자 추출물 내의 ellagic acid의 함량은 세 lot를 3번씩 분석하였을 때 약 $1.92{\mu}g/mg$(0.192%)이 나왔으며 RSD값은 2.36% 이하였다. 따라서 본 연구를 통하여 확립된 ellagic acid의 분석법이 고창 복분자의 개별인정형 건강기능식품 기능성 원료 개발을 위한 기초자료로 활용될 것으로 본다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.170.1-170.1
• /
• 2016

$Bi_2Te_3$ has long been studied for its excellent thermoelectric characteristics. Recently, this material has been known as a topological insulator (TI). The surface states within the bulk band gap of a TI, which are protected by the time reversal symmetry, contribute to the conduction at the surface, while the bulk is in insulating state. In contrast to the bulk defects tuning the chemical potential to the Dirac energy, the native defects near the surface are expected not to change the shape of the Fermi surface and the related spin structure. Using scanning tunneling microscopy (STM), we have systematically characterized surface or near surface defects in p- and n- doped $Bi_2Te_3$, and identified their structure by first principles calculations. In addition, bias-polarity dependences of STM images revealed the electron donor/acceptor nature of each defect. A detailed theoretical study of the surface states near the Dirac energy reveals the robustness of the Dirac point, which verifies the effectiveness of the disturbance on the backscattering from various kinds of defects.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.197-198
• /
• 2006

In the solid freeform fabrication (SFF) system using selective laser sintering (SLS), polyamide-12 powder is currently recognized as general material. In this study, some kinds of polyamide-6 powders with different shape and particlesize were fabricated to investigate the formability, the microstructure and mechanical properties. Also, to develop a more elaborate and rapid system, this study employs a new SLS device with a 3-axis dynamic focusing scanner system instead of the existing fe lens used in commercial SLS. Polyamide-6 powders having the average size of 100 m were treated thermally in order to keep the spherical symmetry in shape. These polyamide-6 powders were mixed with polyamide-12 powders having the average size of 50 m to give the bimodal distribution of size. These mixed powders showed the better fabrication in the selective laser sintering process because the smaller particles of polyamide-11 played an important role in the compact packing of powders by filling the void space between the large particles of polyamide-6. Also, Experiments have performed to evaluate the effect of a scanning path and sintering parameters by fabricating the various 3D objects.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.435-444
• /
• 2005

This paper presents a lane-departure identification (LDI) algorithm for a traveling vehicle on a structured road. The algorithm makes up for the weak points of the former method based on EDF[1] by introducing a Lane Boundary Pixel Extractor (LBPE), the well known Hough transform, and liner regression. As a filter to extract pixels expected to be on lane boundaries, the LBPE plays an important role in enhancing the robustness of LDI. Utilizing the pixels from the LBPE the Hough transform provides the lane-related parameters composed of orientation and distance, which are used in the LDI. The proposed LDI is based on the fact the lane-related parameters of left and right lane boundaries are symmetrical as for as the optical axis of a camera mounted on a vehicle is coincident with the center of lane; as the axis deviates from the center of lane, the symmetrical property is correspondingly lessened. In addition, the LDI exploits a linear regression of the lane-related parameters of a series of successive images. It plays the key role of determining the trend of a vehicle's traveling direction and minimizing the noise effect. Except for the two lane-related parameters, the proposed algorithm does not use other information such as lane width, a curvature, time to lane crossing, and of feet between the center of a lane and the optical axis of a camera. The system performed successfully under various degrees of illumination and on various road types.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1553-1558
• /
• 2009

A series of Eu(III) complexes with various neutral ligands (2,2’:6’,2"-terpyridine (T), diglyme (D), 1N-(2-dimethylamino) ethyl)-1N, 2N, 2N-trimethylethane-1,2-diamine (PT), di-(2-picolyl)-amine derivative (HT), and multidentate terpyridine derivative (DT)) were synthesized to investigate the effect of coordination environment on the sensitized luminescence of Eu(III) complexes. The nine coordination sites of the $Eu^{3+}$ ion are occupied by three bidentate carboxylate moieties and one neutral ligand. The highest emission intensity is obtained for $Eu^{3+}$- $[NA]_3$ (PT), due to the difference in energy transfer efficiency and symmetry of the first coordination sphere of $Eu^{3+}$ ion. But, the lowest emission intensity is obtained for $Eu^{3+}$-$[NA]_3$(T). Terpyridine may not play an important role antenna for photosensitizing $Eu^{3+}$ ion. It could be attributed to the weak spectral overlap integral J value between its phosphorescence band and $Eu^{3+}$ion absorption band. Therefore, different coordination environment of $Ln^{3+}$ ion play an important role in providing sensitization of lanthanide ion emission.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.637-654
• /
• 2011

The present paper studies the variation of the natural frequencies and mode shapes of rectangular plates carrying a three degree-of-freedom spring-mass system (subsystem), when the subsystem changes (stiffness, mass, moment of inertia, location). An analytical approach based on Lagrange multipliers as well as a finite element formulation are employed and compared. Numerically reliable results are presented for the first time, illustrating the convenience of using the present analytical method which requires only the solution of a linear eigenvalue problem. Results obtained through the variation of the mass, stiffness and moment of inertia of the 3-DOF system can be understood under the effective mass concept or Rayleigh's statement. The analysis of frequency values of the whole system, when the 3-DOF system approaches or moves away from the center, shows that the variations depend on each particular mode of vibration. When the 3-DOF system is placed in the center of the plate, "new" modes are found to be a combination of the subsystem's modes (two rotations, traslation) and the bare plate's modes that possess the same symmetry. This situation no longer exists as the 3-DOF system moves away from the center of the plate, since different bare plate's modes enable distinct motions of the 3-DOF system contributing differently to the "new' modes as its location is modified. Also the natural frequencies of the compound system are nearly uncoupled have been calculated by means of a first order eigenvalue perturbation analysis.

• Archives of Plastic Surgery
• /
• 제48권5호
• /
• pp.473-482
• /
• 2021

Background The increasing number of bilateral breast cancer patients has been accompanied by a growing need for bilateral mastectomy with immediate reconstruction. However, little research has investigated the complications and aesthetic outcomes related to bilateral reconstruction. Therefore, we analyzed retrospective data comparing the outcomes of bilateral reconstruction using deep inferior epigastric perforator (DIEP) flaps or implants. Methods This study included 52 patients (24 DIEP group and 28 implant group) who underwent bilateral mastectomy with immediate reconstruction between 2010 and 2020. Patient demographics, surgical characteristics, and complications were recorded. The difference between the left and right position of the nipple-areolar complex with respect to the sternal notch point at the clavicle was measured, and breast symmetry was evaluated. Results The average weight of breasts reconstructed with DIEP flaps (417.43±152.50 g) was higher than that of breasts with implants. The hospitalization period and operation time were significantly longer in the DIEP group. Early complications were significantly more common in the implant group (36.53%) than in the DIEP group. The angles between the nipples and the horizontal line were 1.09°±0.71° and 1.75°±1.45° in the DIEP and implant groups, respectively. Conclusions Although the surgical burden is lower, breast reconstruction using implants requires greater attention with respect to implant positioning, asymmetry, and complications than DIEP flap reconstruction. DIEP flap reconstruction has a prolonged operation time and a high risk of flap failure, but yields excellent cosmetic results and does not require intensive follow-up. Patients should be consulted to determine the most suitable option for them.

• 한국결정학회지
• /
• 제7권1호
• /
• pp.8-19
• /
• 1996

콜레스테롤 메틸카보네이트와 프로필카보네이트의 결정구조를 X-선 회절법으로 연구하였다. 이 결정들은 단사정계이고 공간군은 P21이다. 회절반점들의 세기는 흑연 단색화 장치가 있는 Enraf-Nonius CAD-4 X-선 회절계로 얻었으며, Cu-Kα X-선(λ=1.5418Å)을 사용하였다. 콜레스테롤 메틸카보네이트의 단위세포 길이 a=17.014(1), b=7.682(1), c=10.612(1)Å이며, β=103.05(1)°, Z=2이다. 한편 콜레스테롤 프로필카보네이트의 단위세포길이는 a=13.683(1), b=11.864(2), c=18.904(2)Å이며, β=106.30(1)°, Z=4이다. 분자구조들은 직접법으로 풀었으며 최소자승법으로 정밀화하였다. 최종신뢰도 R값은 메틸카보네이트는 2323개의 회절반점에 대하여 0.051이고, 프로필카보네이트는 3323개의 회절반점에 대하여 0.074이다. 이들 화합물들의 콜레스테롤부분의 분자구조들은 다른 관련 화합물에서 밝혀진 구조와 잘 일치하고 있다. 이의 두 화합물을 포함하여 콜레스테롤 카보네이트들의 결정구조들은 단분자층을 이루면서 쌓여 있어서 독특한 결정구조를 보여주며 같은 계열의 알킬 카보네이트들과 일련의 유사한 결정구조의 구룹들을 보여준다. 콜레스테롤 메틸카보네이트 분자들은 monolayer를 이루면서 쌓여있으며, monolayer 중심부에서는 cholesteryl-C(17) side chain 상호작용이 강하며 layer 사이에는 카보네이트사슬들이 느슨하게 모여있다. 프로필카보네이트 결정에서는 두 개의 결정학적으로 독립된 분자들(A and B)이 있다. A분자들간의 cholesterol-cholesterol상호작용과 B분자들간의 cholesteryl-C(17) side chain 상호작용들이 layer의 중심부에서 일어나며, 이들 분자들은 나사축 방향을 따라서 쌓여있다. 콜레스테롤 카보네이트의 구조들은 액체결정 상태의 특질을 가지고 있고, 이런 성질들을 결정구조와 관련하여 논의하였다.

• 대한원격탐사학회지
• /
• 제40권3호
• /
• pp.295-305
• /
• 2024

본 연구는 초고해상도 무인항공기 자료를 활용하여 황도 갯벌의 미세 퇴적 구조를 분석하는 것을 목적으로 하였다. 갯벌은 육지와 바다 사이의 전이 지역으로서 조석 활동에 의해 끊임없이 변화하며, 퇴적 과정과 환경 조건을 이해하는 데 중요한 독특한 환경을 제공한다. 기존의 현장 관측 방법은 공간적 및 시간적 범위에 한계가 있고, 기존 위성 영상은 미세한 퇴적 구조를 연구하기에 충분한 해상도를 제공하지 못한다. 이러한 한계를 극복하기 위해, 본 연구에서는 충청남도 황도 갯벌의 고해상도 이미지를 무인항공기를 이용해 촬영하였다. 황도 갯벌은 방조제 건설과 같은 해안 개발 프로젝트로 인해 퇴적 환경이 크게 변화한 지역이다. 2022년 5월 17일부터 18일까지 현장 관측을 통해 91개의 지점에서 퇴적물 샘플을 수집하였으며, 그중 25개의 주요 지점을 집중적으로 분석하였다. 약 0.9 mm의 공간 해상도를 가진 무인항공기 자료를 이용하여 미세 퇴적 구조의 파라미터(Parameter)를 식별하고 추출하였다. 건열에서는 다각형 장축의 길이를 추출하였고, 연흔에서는 파장과 연흔을 정량적으로 표현하는 대표적인 지표인 연흔 대칭 지수(Ripple Symmetry Index)를 추출하였다. 연구 결과, 니질 함량이 80% 이상인 지역에서는 평균 37.3 cm 간격의 건열이 형성되었으며, 사질 함량이 60% 이상인 지역에서는 평균 파장이 8 cm, 연흔 대칭 지수가 2.0인 연흔이 형성되었다. 본 연구는 초고해상도 무인항공기 자료를 활용하여 인간의 도보에 의한 현장 관측 없이도 갯벌의 미세 퇴적 구조를 효과적으로 분석할 수 있음을 입증하였다. 이는 환경 모니터링 및 해안 관리에서 중요한 도구로써 무인항공기 기술의 가능성을 강조하며, 무인항공기 자료가 퇴적 구조 연구에 유용하다는 것을 보여준다. 또한, 본 연구의 결과는 보다 정밀한 퇴적상 분류를 위한 기반 자료로 활용될 수 있을 것으로 기대된다.