• Plant Resources
• /
• v.4 no.2
• /
• pp.102-106
• /
• 2001

To develop optimumal storage method of root of Bupleurum falcatum Radix grown on major cultural herbal medicine materials, root of Bupleurum falcatum Radix was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The ratio of root rot during the storage period was not significantly different between packing materials but was significantly different between sealing conditions. Conclusionally, vacuum packing and complete sealing with polyethylene film appears to be optimal for storage of Bupleurum falcatum Radix.

• Applied Microscopy
• /
• v.45 no.2
• /
• pp.52-57
• /
• 2015

Bulk metallic glass (BMG) shows higth strength, high elastic limit, corrosion resistance and good wear resistance and soft magnetic properties and has been considering as a candidate for new structural materials. But they show limited macroscopic plasticity and lack of tensile ductility due to highly localized shear deformation, which should be solved for real structural application. In this paper researches on the enhancement of plasticity of BMG were reviewed briefly. Introducing heterogeneous structure in glass is effective to induce more shear transformation zones (STZs) active for multiple shear band initiation and also to block the propagating shear band. Several methods such as BMG alloy design for high Poisson's ratio, addition of alloying element having positive heat of mixing, pre-straining BMG and variety of BMG composites have been developed for homogenous distribution of locally weak region, where local strain can be initiated. Therefore enhancement of plasticity of BMG is normally accompanied with some penalty of strength loss.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.6
• /
• pp.529-535
• /
• 2011

Indoor noise is very important related to the morale and fighting power of the crew as well as environmental condition for them in a navel vessel. Especially, the crew members working in CIC (combat information center) and sonar equipment room require much more quiet environment condition. One of the most serious noise source in CIC is the cooling fan noise installed in the console of the combat system. Therefore, in this paper, the design of the plenum chamber is studied to reduce the noise of the fan from these consoles by numerical analysis and experiment.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2000.04a
• /
• pp.3-5
• /
• 2000

Of 16 million diabetic patients in the USA, 2.4 millions have experienced diabetic foot ulcer and 67,000 have amputations every year. For treatment of diabetic foot ulcer, Americans spend more than $1 billion each year, including $36,000 per patient for complete treatment and $60,000 for each amputation. Neuropathy and ischemia, two common complications of diabetes mellitus, are the primary underlying risk factors for development of diabetic foot ulcers. Ischemic ulcers develop as a result of low perfusion pressure in the foot with inadequate blood supply, whereas neuropathic ulcers develop from loss of protective sensation. In addition, diabetes also increases the risk of infection by impairing the body's ability to eliminate bacteria. From these circumstances, results are chronic wounds with impaired healing ability.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.54-60
• /
• 2001

This paper deals with control design method having anticipation delay which is proposed for the discrete nonlinear engine where system dynamics is not accurate. Due to the induction-to-power delay in internal combustion(IC) engine having abrupt torque loss, underdamping and chattering in engine idle speed becomes a serious problem and it could make drivers uncomfortable. For this reason, Three types of the closed-loop controller are developed for the stable engine idle speed control. The inputs of the controllers are an engine idle speed and air conditioning signal. The output of the controllers is an duty cycle to operate the idle speed control valve(ISCV). The proposed controllers will be useful for improving actual vehicles since these shows good test

• Tribology and Lubricants
• /
• v.20 no.6
• /
• pp.314-321
• /
• 2004

Thermal distortion of non-contacting mechanical seals with inclined rubbing surfaces is affected by friction heat between seal ring and seal seat. The circulation fluid along the inclined rubbing surfaces maintains cooling friction heat and lubrication between the sealing surfaces of mechanical seal with an inclined surface. Mechanical seals with inclined sealing surfaces may be useful for reducing the frictional heating and power loss because of the introduction of cooling fluids to the sealing gap between seal ring and seal seat. From the FEM computed result shows that the thermal behavior and von Mises stress of sealing faces with an inclined angle 60 are much reduced in comparison of the conventional mechanical face seal with rectangular sealing surfaces.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.245-248
• /
• 2001

In this paper, we have investigated the design technique and fabricated the surface acoustic wave (SAW) filter for duplexer, which consists of Tx. and Rx. filter, and antenna terminal. For Tx. and Rx. bandpass filters we used the one-port SAW resonators with n-section ladder structure. The structure is composed of couples of series-arm resonators and parallel-arm resonators. RF filter using ladder structure was designed and fabricated on 36$^{\circ}$Y-X LiTaO$_3$ substrates. Designed filters, insertion loss is less than 1.5dB, the bandwidth is more than 25MHz, rejection band level is less than -30dB and center frequency is 820MHz.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1556-1558
• /
• 1996

In order to investigate the electrical properties for transformer oils which contains a pure sodium chloride, the dielectric properties is made researches. This experiments for measuring the dielectric loss is performed at $20{\sim}120[^{\circ}C]$ in the temperature range, $30{\sim}1.5{\times}10^5[Hz}$ in the frequency range and $300{\sim}1500[mV]$ in the voltage range. The result of experiment for the movement of carrier and the physical constants to contribute dielectric properties of specimen with a pure sodium chloride.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.12-14
• /
• 2004

Superconducting transmission power cable is one of interesting parts in power application using high temperature superconducting wire. One of import ant parameters in high-temperature superconduting (HTSC) cable design is transport current distribution because it is related with current transmission capacity and AC loss. In this paper, the transport current distribution at conducting layers was investigated through the analysis of the equivalent circuit for HTSC power cable with shield layer and compared with the case of without shield layer. The transport current distribution due to of the contact resistance and the pitch was improved in the case of HTSC power cable with shield layer from the analysis.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.145-150
• /
• 2003

Polypropylene nonwoven fabrics were exposed to He/$O_2$ atmospheric pressure glow discharge plasma. Surface chemical analysis and contact angle measurement revealed the surface oxidation by formation of new functional groups after plasma treatment. Weight loss (%) measurement and scanning electron microscopy analysis showed a significant plasma etching effect. It was investigated in low-stress mechanical properties of the fabrics using Kawabata Evaluation System (KES-FB). The surface morphology change by plasma treatment increased surface friction due to an enhancement of fiber-to-fiber friction, resulting in change of other low-stress mechanical properties of fabric.