• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.2
• /
• pp.73-81
• /
• 2013

Purpose: The purpose of this study was to evaluate the effect of surface treatment on the shear bond strength of zirconia ceramic to 3 resin cements. Materials and methods: A total of 143 disk-shaped Zirconia blocks (HASS Co., Gangneung, Korea) were randomly divided into three treatment groups: (1) only 50 ${\mu}m$ $Al_2O_3$ sandblasting, (2) 50 ${\mu}m$ $Al_2O_3$ sandblast and zircona liner, (3) 50 ${\mu}m$ $Al_2O_3$ sandblasting and Rocatec (3M ESPE, Seefeld, Germany). Bistite II (Tokuyama Dental Co., Japan), Panavia F (Kuraray Medical, Japan), and Superbond C&B (Sun Medical, Japan) were used to cement onto the zirconia. After 24h of storage in distilled water, shear bond strength was evaluated. High value group was re-tested after thermocycling at 5,000 cycles(5-$55^{\circ}C$). Shear bond strength data were analyzed with one-way ANOVA, two-way ANOVA test and Post Hoc Test (${\alpha}$=.05). Shear bond strength data before and after thermocycling were analyzed with Independent sample T test (${\alpha}$=.05). Results: Super-bond C&B treated with Rocatec showed the most high shear bond strength. Super-bond C&B groups resulted in significantly higher than other cement groups (P<.05). Rocatec groups resulted in significantly higher than other surface treatment groups (P<.05). Shear bond strength has increased in Panavia F treated with Zirconia liner (P<.05). After thermocycling, shear bond strength was increased in Super-bond C&B treated with Rocatec but decreased in other groups (P<.05). Conclusion: Super-bond C&B cement resulted the highest shear bond strength and Rocatec system enhanced the shear bond strength. After thermocycling, shear bond strength has decreased in most resin cements except Super-bond C&B treated with Rocatec.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.102-111
• /
• 2013

A novel MgO-based binder was developed and applied to treat the anoxic sediment that was collected from Seonakdong river, Korea and was contaminated with heavy metals. The treated sediment was evaluated by measuring compressive strength, expansion, leaching of heavy metals and storage characteristics for $CO_2$. Initially, an optimal blending ratio of lime (L)/fly ash (FA)/blast furnace slag (BFS) that was to be mixed with MgO was screened to be $L_{0.3}-FA_{0.1}-BFS_{0.6}$. Long-term strengths of the sediments that were treated by various mixtures of MgO and $L_{0.3}-FA_{0.1}-BFS_{0.6}$ were then evaluated and the blending ratios between 4 : 6 and 6 : 4 were found optimal, which yielded a compressive strength of 4.09 MPa. On this basis, the optimal MgO-based binder was selected to be a 5 : 5 mixture of MgO and $L_{0.3}-FA_{0.1}-BFS_{0.6}$. The good performance of the MgO-based binder was believed to be due to the formation of Mg $(OH)_2$, which filled the micropores and also increased the density of the solidified matrices. The MgO-based binder exhibited an average stabilizing capacities for heavy metals of 92.9%, which was similar to or higher than that of Portland cement. It was found that 69.1 kg of carbon dioxide could be sequestrated after 365 days of curing when treating a ton of anoxic sediments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.2
• /
• pp.113-118
• /
• 1995

Eighteen Holstein Friesian ${\times}$ Native heifers with an average live weight of $175.4{\pm}27.8kg$ were allotted to 3 dietary groups. All animals were kept individually in a stanchion barn with free access to water and urea-treated rice straw (UTS). The supplemented feeds were as follows: Group (Gr) 1 - concentrate mixture (15% CP) at 1% body weight (BW), Gr 2 - concentrate mixture at 0.7% BW + free licking of multinutrient block (MNB), Gr 3 - as Gr 2 + 0.3% BW ground com. Multinutrient block composed of 20% mineral mixture, 10% urea, 18% molasses, 20% soybean meal, 22% sesame meal, 10% cement, 0.15 million IU and 50 IU/kg MNB of vitamin A and E. The experimental period lasted 12 weeks. The result revealed that MNB enhanced intake of UTS and total dry matter intake. Animals in Gr 3 consumed a higher amount of feed than the other 2 groups, thus resulting in the highest live weight gain and tended to possess the best feed conversion ratio. Heifers in Gr 2 also performed better than Gr 1 although the difference was not significant. Average MNB intake found to be 0.65 kg/day. Feed cost per kg gain was not significantly different amon groups. However if the cost of MNB could be lower, it would benefit the production cost of animals. The advantage of MNB is the safety of using a high level of urea. Although it was supplemented to UTS which also contained non-protein nitrogen (NPN), no toxic sign was shown. The results indicated that MNB could be partially substituted to concentrate mixture and it was even better when used incombination with soluble carbohydrate feed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.76-92
• /
• 1998

The purpose of this study was to evaluate the possible efficacy of Nd-YAG laser as a dentin conditioner by observing the laser irradiation dentin surface under scanning electron micrograph and measuring shear bond strength of restored light-cured glass ionomer mold. Fifty intact premolars were prepared for shear bond strength tests. The teeth were randomly divided into five groups as follows; Group I. no treatment Group II. 10% poly acrylic acid, 20 sec Group III. laser treatment 2 w, 20 Hz, 2 sec Group IV. laser treatment 2 w, 20 Hz, 5 sec Group V. laser treatment 2 w, 20 Hz, 10 sec Samples of each group were restored with light-cured glass ionomer cement after dentin conditioning and then measuring the shear bond strength of each specimen were measured using universal testing machine. Additional ten premolars were prepared for SEM analysis The result from the this study can be summarized as follows. 1. Shear bond strength of polyacrylic acid-treated group (II) was significantly higher than other groups (p<0.05). 2. No statistically significant difference could be found between three laser-treated groups (III, IV, V) in shear bond strength(p>0.05) 3. According to the result of observation under SEM, Polyacrylic acid was shown to have removed the smear layer effectively and opened the dentinal tubules, whereas the laser has produced the irregular surface mainly composed of melted and fused structure. The microcracks found in laser-treated groups increased in number with irradiation time and formed the regular mesh-type in 10 sec-irradiation group. 4. The ultrastructural change of dentin surface created by laser irradiation was found to the improper for bonding of the glass ionomer restorative materials. And the lower shear bond strength of laser irradiated group might have been due to the failure to form the suit able dentin surface for the glass ionomer to penetrated into and form the proper micromechanical retention.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.75-84
• /
• 2012

In this paper, strength and leaching characteristics of water sludge-added lightweight soils(WALS) considering reinforcing materials(waste fishing net, glue treated waste fishing net and geogrid) and layer(1 or 2 layer) were investigated using unconfined compression test and leaching test. Several specimens of water sludge-added lightweight soil consisted of water sludge, cement, and bottom ash were prepared according to flowability. Reinforcing material added into these specimens were waste fishing net and geogrid. A glue treated waste fishing net was also added in order to increase interlocking between soil mixture and waste fishing net. Strength increased in the order of WALS reinforced by waste fishing net, glue treated waste fishing net, and geogrid. Strength of specimen with double layer-reinforcing material was greater than that of specimen with single layer reinforcing material. Leaching result of WALS was also satisfied with standard of ministry of environment.

• Journal of Korean Neurosurgical Society
• /
• v.47 no.3
• /
• pp.199-202
• /
• 2010

Objective : Balloon kyphoplasty is a minimally invasive procedure that is mainly performed for refractory pain due to osteoporotic compression fractures. The purpose of this study was to evaluate the results of balloon kyphoplasty performed at different times after an injury. Methods : In this retrospective study, the records of 99 patients who underwent one level of balloon kyphoplasty between January 2005 and December 2007 were reviewed. The patients were divided into three groups : 21 patients treated within 3 weeks of an injury (the acute group), 49 treated within 3 weeks to 2 months of an injury (the subacute group), and 29 patients treated at more than 2 months after an injury (the chronic group). Clinical outcomes were assessed using a visual analogue scale (VAS). In addition, modified MacNab's grading criteria was used to assess the subjective patient outcome. The radiology findings, including vertebral height restoration and procedure related complications, were analyzed based on the different time intervals after the injury. Results : Patients in all three groups achieved marked pain relief in terms of the VAS within 7 days of the procedure. Good or excellent results were achieved by most patients in all three groups. However, the height restoration, the main advantage to performing a balloon kyphoplasty, was not achieved in the chronic group. Moreover, evidence of complications including cement leakage was observed significantly less frequently in the subacute group compared to the other two groups. Conclusion : Although balloon kyphoplasty is an effective treatment for osteoporotic compression fractures, with regard to pain relief, the subacute stage appears to be optimal for treating patients with a balloon kyphoplasty in terms of achieving the best outcomes with minimal complications.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.746-750
• /
• 2007

Vertebroplasty has drawn much attention as a medical treatment for the compression fracture of spine, which strengthens the vertebral body and corrects deformity, and relieves pain in patients by injecting bone cement. However vertebroplasty can cause fracture on adjacent vertebra due to relative stiffness change. This study involves the biomechanical evaluation of the vertebroplasty especially on adjacent vertebral body. The finite element method has been employed to analyze the patient who was treated vertebroplasty under static and dynamic loading. For this study, a three-dimentioal model of the three-level ligamentous lumbar segment ($L1{\sim}L3$)is created from medical image data (CT)and compared with the experimental results in vitro.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.1
• /
• pp.134-138
• /
• 2002

The acute osteomyelitis of calcaneus has been rarely reported. A diabetic patient, 44 year-old male was appeared with painful swelling on the hindfoot after being injected with steroid on the lateral area of hindfoot at a private clinic. The diagnosis was an acute calcaneal osteomyelits which was based on MRI finding. We report a case of the acute osteomyelitis of calcaneus, which was successfully treated with the curettage, antibiotic- impregnated bone cement beads, and delayed autogenous iliac bone graft, using the lateral approach.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.112-113
• /
• 2014

This study was done to resolve the air reduction in mortar when mixed with ERCO. Effects of the water repellent ALC powder due to its particle size and substitution ratio on the cement mortar with ERCO was analyzed. Results showed more water repellent ALC powder ensured more air but did not affect the size of particles. It was determined the compression was caused by more air and water added to achieve the flow. Therefore, substituting with water repellent ALC powder may compensate for the air reduction in mortar with ERCO. Other measures and approaches are needed in order to resolve the reduced strength.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.17-24
• /
• 2000

Hardening agent has been the traditional material for surface soil stabilization of soft ground. This study aims at determining optimal mixture ratio of hardening agent in accordance with the required design specifications. Hardening agent is properly mixtured with Fly ash, Gypsum, Slag and Cement for the ettringite hydrates which is effective for early stabilization of unconsolidated soil. The treated soil is the clay which are widely found here and there in Korea. In this study, preliminary tests were performed to get optimal mixture ratio of stabilizer ingredient, and marine clay in Jin-Hae was used to get physical and chemical properties. Laboratory tests of 50 stabilized soil were peformed to get optimal mixture ratio for 16 stabilizer material of 6 type, and stabilizer mixing was determined.