• 한국건설순환자원학회논문집
• /
• 제12권1호
• /
• pp.33-39
• /
• 2024

본 연구에서는 나노소재의 콘크리트 혼화재로 사용하기에 적합한지 확인하기 위해 마이크로 실리카 및 흄드 실리카 대체율 변화에 따른 시멘트 페이스트의 기본 특성을 분석하였다. 초고강도용 배합을 참고하여 나노소재 대체율에 따른 시멘트 페이스트의 유동성을 평가와 압축강도 특성을 비교 분석하였다. 반응성 나노소재의 시멘트 수화물과의 관련 특성은 SEM, EDS 분석 이용하여 미세구조를 관찰과 수화 생성물의 구성요소 확인하였다. 본 연구에 사용한 반응성 나노소재는 탭밀도가 0.061~0.264 g/cm³ 수준으로 SF 대비 낮게 측정되었다. 마이크로 실리카의 경우 대체율이 증가할수록 우수한 압축강도 특성을 나타냈지만 흄드 실리카는 마이크로 화이트와는 달리 대체율 0.01~0.1 %에서 우수한 압축강도를 확보하였다. 수화특성 분석결과에서도 동일한 경향을 확인할 수 있었다.

• Carbon letters
• /
• 제23권
• /
• pp.22-29
• /
• 2017

The compressive strength and electrical resistance of pitch-based carbon fiber (CF) in cementitious materials are explored to determine the feasibility of its use as a functional material in construction. The most widely used CFs are manufactured from polyacrylonitrile (PAN-based CF). Alternatively, short CFs are obtained in an economical way using pitch as a precursor in a melt-blown process (pitch-based CF), which is cheaper and more eco-friendly method because this pitch-based CF is basically recycled from petroleum residue. In the construction field, PAN-based CFs in the form of fabric are used for rehabilitation purposes to reinforce concrete slabs and piers because of their high mechanical properties. However, studies have revealed that construction materials with pitch-based CF are not popular. This study explores the compressive strength and electrical resistances of a cement paste prism using pitch-based CF.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.161-167
• /
• 2008

Optimization of concrete mixing system is very important for the production of quality mixture of concrete and requires very complicated, specialized knowledge as there are a variety of variables that influence the result. One of the methods of optimizing the concrete mixing system is to minimize the volume of cement paste which, in turn, means maximizing the volume of aggregate. The purpose of this study is to determine the minimum volume of cement paste used in the design of concrete mixture and to design the optimum concrete mixing system based on the fluidity of mortar and concrete. In determining the minimum volume of cement paste, experiments of mortar and concrete were performed based on their workability, material segregation and bleeding. Type of aggregate, granularity distribution and sand percentage were used as test parameters and measurements were taken of the distribution of granularity, usage of HRWRA, minimum volume of paste and drying shrinkage and compressive strength of concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.51-54
• /
• 2007

This study investigates the properties of paste and mortar from different types and forms of silica fume on cement binder for ultra high strength. Although most Silica Fumes distributed in the market fulfill the KS quality standard, each type showed different levels of loss of ignition. When evaluating cement binder for ultra high strength in a form of paste. Flow, viscosity and moving freely time show great difference depending on the Silica Fume's form and type of primary particle's dispersibility. The evaluation of Silica Fume's dispersibility can be possible with the paste test since there is a high correlation of flow quality between paste and mortar. The compressive strength when using Silica Fume was correlated to the SiO2 content. Synthetically, selecting Silica Fume with the most the ideal primary particle is the key to optimizing the formation for cement binder for ultra high strength.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.156-162
• /
• 2017

국내 시멘트 산업은 시멘트 제조 시 발생되는 $CO_2$를 감축하기 위해 $CO_2$발생의 주요 요인인 클링커 대신 시멘트 대체재료 사용을 확대하기 위한 다양한 기술 개발을 위해 노력하고 있다. 이에, 최근 플라이애시를 다량 치환한 하이볼륨 플라이애시 시멘트(HVFC)에 대한 연구 가 활발히 진행되고 있다. 하지만, 플라이애시의 다양한 장점에도 불구하고 낮은 조기강도 발현 특성이 플라이애시를 다량으로 활용한 바인더의 현장적용에 있어서 가장 큰 문제로 지적되고 있다. 본 연구는 이러한 한계를 극복하고자 플라이애시 혼입률에 따른 HVFC 페이스트의 수화 및 압축강도 특성을 파악하기 위해, 플라이애시 혼입률 0~80%의 배합을 이용하여 실험을 수행하였다. 실험결과 낮은 물-바인더 비에 의한 HVFC 페이스트 배합은 초기 재령에서의 낮은 압축강도의 한계점을 극복할 수 있을 것으로 판단된다. 또한 중량비의 50% 이상이 플라이애시로 치환된 페이스트의 응결시간이 증가하는 경향을 보아, 플라이애시 중량비 50%는 충진 효과의 임계점으로 판단된다.

• Journal of Microbiology and Biotechnology
• /
• 제22권11호
• /
• pp.1568-1574
• /
• 2012

Microbiological calcium carbonate precipitation (MCCP) has been investigated for its ability to improve the durability of cement mortar. However, very few strains have been applied to crack remediation and strengthening of cementitious materials. In this study, we report the biodeposition of Bacillus subtilis 168 and its ability to enhance the durability of cement material. B. subtilis 168 was applied to the surface of cement specimens. The results showed a new layer of deposited organic-inorganic composites on the surface of the cement paste. In addition, the water permeability of the cement paste treated with B. subtilis 168 was lower than that of non-treated specimens. Furthermore, artificial cracks in the cement paste were completely remediated by the biodeposition of B. subtilis 168. The compressive strength of cement mortar treated with B. subtilis 168 increased by about 19.5% when compared with samples completed with only B4 medium. Taken together, these findings suggest that the biodeposition of B. subtilis 168 could be used as a sealing and coating agent to improve the strength and water resistance of concrete. This is the first paper to report the application of Bacillus subtilis 168 for its ability to improve the durability of cement mortar through calcium carbonate precipitation.

• Computers and Concrete
• /
• 제17권3호
• /
• pp.337-351
• /
• 2016

This paper presents the properties of pervious concrete containing high-calcium fly ash. The water to binder ratios of 0.19, 0.22, and 0.25, designed void ratios of 15, 20, and 25%, and fly ash replacements of 10, 20, and 30% were used. The results showed that the use of fly ash as partial replacement of Portland cement enhanced the mixing of paste resulting in a uniform mix and reduced amount of superplasticizer used in the mixture. The compressive strength and flexural strength of pervious concrete were slightly reduced with an increase in fly ash replacement level, while the abrasion resistance increased due mainly to the pozzolanic and filler effects. The compressive strength and flexural strengths at 28 days were still higher than 85% of the control concrete. The aggregate size also had a significant effect on the strength of pervious concrete. The compressive strength and flexural strength of pervious concrete with large aggregate were higher than that with small aggregate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.114-115
• /
• 2021

In this study, the effects of thermal activation on the compressive strength and water absorption of fly ash-cement systems were studied. The results show that the increase in curing temperature improves the early-age compressive strength and reduces its water absorption.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.85-88
• /
• 1999

We tested the limestone powder as a filler powder for the effective use of slag cement. Hydration process were investigated by measuring the thermal differential analysis(DTA), compressive strength, XRD patterns, calorimeter of slag cement-limestone powder paste prepared by mixing limestone powder-slag cement. The results obtained in this study, there were no significant difference between the cases of adding up to 5% limestone powder, but the reaction time was accelerated. Also the compressive strength was increased for adding up to 5% limestone powder. The min hydrated paste products were Ca(OH)2 and calcium silicate hydrates. In the case of mixed limestone powder peak appear tricalcium carboaluminate hydrate in the sample of 7 days hydration.

• 콘크리트학회지
• /
• 제9권3호
• /
• pp.149-156
• /
• 1997

시멘트 모르타르의 압축강도 향상을 휘하여 분말혼화제를 제조하였으며,분말혼화재 사용에 따르는 유동성 감소를 억제하고자 고유동화제를 사용하였다. 분말혼화재(FAS)는 불산부생 II형 무수석고와 플라이애쉬 및 실리카흄을 혼합제조하여 시멘트 대신 각각10,20 wt% 씩 치환하였다. 물/고형분비(W/S)=0.40에서 FAS 로 치환된 시멘트 페이스트의 유동성은 저하되었고, 유동성 저하의 억제를 위한 고유동화제는 NSF와 NT-2가 효과적이었다. 시멘트 모르타르의 유동성은 II형 무수석고의 분말도가 미세할수록 증가하였고, 유동성저하는 FAS를 10 wt% 치환하였을 때 작게 나타났다. 압축강도는 10 wt%치환한 공시체가 20 wt%치환한 것보다 높게 나타났고 특히 $\gamma$ 를 10 wt%치환한 공시체( CI )에서 가장 높은 압축강도값을 나타내었다.