• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.137-138
• /
• 2015

The use of the cement and increased with the recent development of the construction industry. If the cement is the environmental problems caused by generating a large quantity of CO₂ and the production process. Accordingly, this study is the test to determine the sulfuric acid and hydrochloric acid resistance properties of the Light weight matrix product of blast furnace slag-based light. A result, the compression strength of the sulfuric acid and hydrochloric acid immersion showed alower strength than the Plain.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.55-56
• /
• 2022

As global warming becomes serious, research is continuously being conducted to reduce CO2 emissions. Among building materials, the carbon emission of cement is so high that it accounts for 6.8% of the carbon emission of the entire industry. Studies replacement of cement with blast furnace slag and fly ash are steadily increasing. In addition, efforts are being made to reduce air pollution due to increased damage caused by increased concentrations of harmful substances such as fine dust and heavy metals in the air. There is an increasing number of studies that enable adsorption by mixing adsorbents into building materials. This study reviewed the strength properties to make an adsorbable non-cement finishing material by mixing tourmaline, an adsorbent, based on the non-cement composite, and confirmed that the strength decreases as the replacement ratio increases.

• 한국세라믹학회지
• /
• 제35권5호
• /
• pp.421-428
• /
• 1998

순수 HAC/PVA 계 및 epoxy 수지와 urethane이 첨가된 HAC/PVA 계 MDF 시멘트 복합재료에 서로 다른 관능기를 갖는 3종류의 silane coupling agent를 첨가하여 강도 및 수분안정성에 대한 영향을 살펴보고 기공율 분석을 통해 미세구조와 강도의 관계를 살펴보았다. Silane의 관능기에 따라 각각의 MDF 시멘트 복합재료의 강도 및 수분안정성 향상에 대한 효과가 다른 것을 알 수 있었다. 순수 PVA 메트릭스의 경우에 대해서는 vinyl 기를 갖는 silane이 효과적인 영향을 나타내었으며 epoxy수지가 첨가된 MDF 시멘트에 대해서는 epoxy-methoxy 기를 갖는 silane이, 그리고 urethane이 첨가된 MDF 시멘트에 대해서는 diamine 기의 silane이 효과적이었다. Silane의 첨가량에 따라서는 urethane이 첨가된 MDF 시멘트 복합재료의 경우, diamine 기의 silane이 많이 첨가될수록 수분안정성이 향상되었으며 특히 2wt%의 silane을 첨가하고 wqrm press를 이용하여 성형하였을 때 건조 강도는 약 20% 향상되었으며 습윤강도는 40~70%까지 크게 향상되었다. 이는 기공율과 밀접한 관계가 있음을 알 수 있었다. Epoxy 수지가 첨가된 MDF 시멘트의 경우에서도 2wt%의 silane 첨가까지는 그 첨갈향이 많아질수록 강도가 향상되는 것을 알 수 있었지만 과량의 silane(4wt%)이 첨가될 경우에서는 오히려 특성저하가 나타났다.

• Computers and Concrete
• /
• 제24권3호
• /
• pp.207-222
• /
• 2019

This paper has presented an effective and accurate meso-scale finite element model for simulating the fracture process of concrete under compression-shear loading. In the proposed model, concrete is parted into four important phases: aggregates, cement matrix, interfacial transition zone (ITZ), and the initial defects. Aggregate particles were modelled as randomly distributed polygons with a varying size according to the sieve curve developed by Fuller and Thompson. With regard to initial defects, only voids are considered. Cohesive elements with zero thickness are inserted into the initial mesh of cement matrix and along the interface between aggregate and cement matrix to simulate the cracking process of concrete. The constitutive model provided by ABAQUS is modified based on Wang's experiment and used to describe the failure behaviour of cohesive elements. User defined programs for aggregate delivery, cohesive element insertion and modified facture constitutive model are developed based on Python language, and embedded into the commercial FEM package ABAQUS. The effectiveness and accuracy of the proposed model are firstly identified by comparing the numerical results with the experimental ones, and then it is used to investigate the effect of meso-structure on the macro behavior of concrete. The shear strength of concrete under different pressures is also involved in this study, which could provide a reference for the macroscopic simulation of concrete component under shear force.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.480-491
• /
• 2018

Calcium phosphates (CaP) were prepared by a wet chemical method. Micro-crystalline dicalcium phosphate (DCPD) was precipitated at $37^{\circ}C$ and pH 5.0 using $Ca(OH)_2$ and $H_3PO_4$. The precipitated DCPD solution was kept at $37^{\circ}C$ for 96 h. Artificial bone cement was composed of DCPD, $Ca(H_2PO_4)_2{\cdot}H_2O$ (MCPM), and $CaSO_4{\cdot}1/2H_2O$, $H_2O$ and aqueous poly-phosphoric acid solution. The wet prepared CaP powder was used as a matrix for the bone cement recipe. With the addition of aqueous poly-phosphoric acid, the cement hardening reaction was started and the CaP bone cement blocks were fabricated for the mechanical strength measurement. For the tested blocks, the mechanical strength was measured using a universal testing machine, and the microstructure phase analysis was done by field emission scanning electron microscopy and X-ray diffraction. The cement hardening reaction occurred through the decomposition and recrystallization of MCPM and $CaSO_4{\cdot}1/2H_2O$ added on the surface of the wet prepared CaP, and this resulted in grain growth in the bone cement block.

• 한국건축시공학회지
• /
• 제19권3호
• /
• pp.201-207
• /
• 2019

본 연구에서는 변형속도에 따른 비정질 강섬유보강 시멘트복합체의 직접인장특성에 대하여 평가하였다. 길이 15, 30mm의 박판형 비정질 강섬유를 각각 1.0, 1.5, 2.0% 혼입한 섬유보강 시멘트복합체를 제작하였으며, 변형속도 $10^{-6}/s$(정적), $10^1/s$(동적)의 조건에서 직접인장시험을 수행하였다. 그 결과, 길이 15mm의 비정질 강섬유는 섬유의 섬유의 길이가 짧고 혼입개체수가 많기 때문에 섬유가 매트릭스로부터 인발되었다. 반면, 길이 30mm의 비정질 강섬유는 섬유의 표면이 거칠고 비표면적이 크기 때문에 매트릭스와의 부착성능이 우수하지만, 박판형의 섬유 형상이 전단력에 약하기 때문에 섬유가 인발되지 않고 파단 되었다. 섬유의 길이가 길수록 인장강도, 변형능력 및 인성이 큰 것으로 나타났다. 반면, 길이 30mm의 비정질 강섬유는 매트릭스로부터 인발되지 않고 파단 되지만 길이 15mm의 비정질 강섬유는 매트릭스로부터 인발되기 때문에 변형속도의 영향을 받는 섬유-매트릭스 계면의 부착효율이 크게 되어, 인장강도, 변형능력 및 인성에 대한 동적증가계수가 큰 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.244-245
• /
• 2014

This is an experimental study on manufacturing of non-cement matrix. Materials like cement and blowing agent in foamed concrete is replaced by by-products from blast furnace slag and paper ash. Further, the experiment was performed by replacing alkali with red mud by (0, 5, 10, 15, 25, 35, 45) of weight of alkali (wt.%) in order to reduce the amount of expensive alkali acclerator. Sample Plain with density showed lowest. The compressive strength test result, showed a similar trend with density. And it showed that compressive strength of the RM-0.05 was highest.

• 대한치과의사협회지
• /
• 제48권1호
• /
• pp.56-62
• /
• 2010

In recent years, a number of special treatment procedures have been introduced to reestablish new tooth supporting tissues with varying degrees of success including guided tissue regeneration(GTR), bone grafting(BG) and the use of enamel matrix derivative(EMD). EMD is an extract of enamel matrix and contains amelogenins of various molecular weights. Emdogain(EMD) might have some advantages over other methods of regenerating the tissue supporting teeth lost by gum disease, such as less postoperative complications. Emdogain contains proteins(derived from developing pig teeth) believed to regenerate tooth attachment. The decrease in probing depth after EMD treatment is achieved primarily by clinical attachment gain and bone regeneration and only to a minor extent by gingival recession. In conclsion, EMD seems to be safe, was able to regenerate lost periodontal tissues in previously diseased sites based on clinical parameters.

• Computers and Concrete
• /
• 제34권1호
• /
• pp.123-135
• /
• 2024

Strain-hardening cement-based composites (SHCC) under cracked condition exhibits remarkable capillary absorption due to water ingress from multiple cracks. Surface treatment using water repellent agents is an effective way for improving water resistance of SHCC, but the water resistance may remarkably decrease when cracks penetrate impregnation depth. Another way is to add water repellent agents directly into the mixture, offering SHCC integral water repellency even if cracks form later. However, although integral water repellent treatment has been proved feasible by previous studies, there is still lack of simulation work on the treated SHCC for evaluating its durability. This study presents a simulation method for capillary absorption of cracked SHCC with integral treatment based on a multi-scale approach proposed in the authors' previous work. The approach deals with water flows in bulk matrix and multiple cracks using two individual transport equations, respectively, whereas water absorbed from a crack to its adjacent matrix is treated as the mass exchange of the two equations. In this study, the approach is enhanced for the treated SHCC by integrating the influencing of water repellency into the two transport equations as well as the mass exchange term. Using the enhanced approach, capillary absorption of water repellent SHCC under cracked condition is simulated, showing much more reduced water ingress than the untreated concrete, which is consistent with total absorption data from previous tests. This approach is also capable of simulating water spatial distribution with time in treated SHCC reasonably.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권2호
• /
• pp.95-103
• /
• 2012

변형경화형 시멘트 복합체(SHCC)는 직접인장 상황에서 FRCCs에 비해 우수한 변형경화 특성을 갖는 재료이다. 하지만 SHCC는 일반적인 콘크리트에 비해서 시멘트비율이 높은 부배합 이며, 이에 따라서 자기수축이 큰 특성을 갖는 재료이다. 따라서 시멘트 복합체 내에 팽창재를 대체함으로써 수축저감을 통한 성능향상을 기대하였다. 이 연구에서는 각 강도별 SHCC의 배합에 팽창재를 대체함에 따른 역학적특성을 평가하고자 하였다. 시험결과 설계기준 압축강도 70MPa 배합이 압축, 인장, 휨, 시험에서 우수한 역학적 특성을 나타내었으며, 균열 특성에서는 팽창재를 대체한 SHCC가 균열분산 및 연성에서 우수한 특성을 나타내었다.