• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.1008-1018
• /
• 1996

For assigning channel in a cellular sireless network, we purpose satisfying constraints with a related probability between cells and channels on the channel interference matrix formed by m terminals and n channels. And we purpose to get efficient channel assigning to limited channels in a wireless cell using parallelism of neural networks. In this paper, we solve the problem according to the number of requeirements when channel change with 11-533 procession elements. We demonstrate efficiency of proposed algorithm through same simulations in a specific time period.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5264-5281
• /
• 2017

Multihop relay-based cellular networks are attracting much interest because of their throughput enhancement, coverage extension, and low infrastructure cost. In these networks, relay stations (RSs) between a base station (BS) and mobile stations (MSs) drastically increase the overall spectral efficiency, with improved channel quality for MSs located at the cell edge or in shadow areas, and enhanced throughput of MSs in hot spots. These relay-based networks require an advanced radio resource management scheme because the optimal amount of radio resource for a BS-to-RS link should be allocated according to the MS channel quality and distribution, considering the interference among RSs and neighbor BSs. In this paper, we propose optimal resource planning algorithms that maximize the overall utility of relay-based networks under a proportional fair scheduling policy. In the first phase, we determine an optimal scheduling policy for distributing BS-to-RS link resources to RSs. In the second phase, we determine the optimal amount of the BS-to-RS link resources using the results of the first phase. The proposed algorithms efficiently calculate the optimal amount of resource without exhaustive searches, and their accuracy is verified by comparison with simulation results, in which the algorithms show a perfect match with simulations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2732-2749
• /
• 2023

Device-to-Device (D2D) communication has received increasing attention and been studied extensively thanks to its advantages in improving spectral efficiency and energy efficiency of cellular networks. This paper proposes a novel relay selection algorithm for multi-hop full-duplex D2D communications underlaying cellular networks. By selecting the relay of each hop in a reverse manner, the proposed algorithm reduces the heavy signaling overhead that traditional relay selection algorithms introduce. In addition, the social domain information of mobile terminals is taken into consideration and its influence on the performance of D2D communications studied, which is found significant enough not to be overlooked. Moreover, simulations show that the proposed algorithm, in absence of social relationship information, improves data throughput by around 70% and 7% and energy efficiency by 64% and 6%, compared with two benchmark algorithms, when D2D distance is 260 meters. In a more practical implementation considering social relationship information, although the proposed algorithm naturally achieves less throughput, it substantially increases the energy efficiency than the benchmarks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.4819-4834
• /
• 2015

The spectral efficiency of cellular networks can be improved when proximate users engage in device-to-device (D2D) communications to communicate directly without going through a base station. However, D2D communications that are not properly designed may generate interference with existing cellular networks. In this paper, we study resource allocation and power control to minimize the probability of an outage and maximize the overall network throughput. We investigate three power control-based schemes: the Partial Co-channel based Overlap Resource Power Control (PC.OVER), Fractional Frequency Reuse based Overlap Resource Power Control (FFR.OVER) and Fractional Frequency Reuse based Adaptive Power Control (FFR.APC) and also compare their performance. In PC.OVER, a certain portion of the total bandwidth is dedicated to the D2D. The FFR.OVER and FFR.APC schemes combine the FFR techniques and the power control mechanism. In FFR, the entire frequency band is partitioned into two parts, including a central and edge sub-bands. Macrocell users (mUEs) transmit using uniform power in the inner and outer regions of the cell, and in all three schemes, the D2D receivers (D2DRs) transmit with low power when more than one D2DRs share a resource block (RB) with the macrocells. For PC.OVER and FFR.OVER, the power of the D2DRs is reduced to its minimum, and for the FFR.APC scheme, the transmission power of the D2DRs is iteratively adjusted to satisfy the signal to interference ratio (SIR) threshold. The three schemes exhibit a significant improvement in the overall system capacity as well as in the probability of a user outage when compared to a conventional scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.48-55
• /
• 2015

This paper studies how to solve a problem caused by M2M terminals sending a few data based on $3^{rd}$ Generation Partnership Project(3GPP) Long Term Evolution-Advanced(LTE-A) system and then it is analyzed, proposed, and introduced into the techniques. Especially, it is introduced solution for the lack of Random Access Channel and an increasing number of latency caused by countless M2M devices. It is proposed the technology for M2M grouping as well as allowable access probability according to user type. As it decreases the number of terminal by grouping M2M devices to try random access at PRACH, it can be reduced collision between Cellular users and M2M devices. So, it is proved that the proposed mechanism can solve the increasing average latency of random access on system coexisting Cellular users and M2M devices through simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.229-239
• /
• 2013

Recently, device-to-device (D2D) communications have been highlighted to improve the spectral efficiency and offer various user experiences in cellular networks. In this paper, we survey standards and literatures related to the D2D technology and address various advantages of D2D technology, and the problems to be resolved before practically implemented. Especially, by considering an important interference issue between cellular and D2D links, five resource allocation and interference management scenarios are provided and their performances are evaluated through the system level simulations. The simulation results show that the use of D2D significantly improve the cell capacity and the D2D user rate due to the effects of frequency reuse and data off-loading. Notably, it is also shown that an optimal D2D communication range exists to maximize the system performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1569-1586
• /
• 2015

This paper considers the optimal cell association and resource allocation for load balancing in a heterogeneous cellular network subject to user's quality-of-service (QoS) constraints. We adopt the proportional fairness (PF) utility maximization formulation which also accommodates the QoS constraints in terms of minimum rate requirements. With equal resource allocation this joint optimization problem is either infeasible or requires relaxation that yields a solution which is difficult to implement. Nevertheless, we show that this joint optimization problem can be effectively solved without any priori assumption on resource allocation and yields a cell association scheme which enforces single BS association for each user. We re-formulated the joint optimization problem as a network-wide resource allocation problem with cardinality constraints. A reweighted heuristic l₁-norm regularization method is used to obtain a sparse solution to the re-formulated problem. The cell association scheme is then derived from the sparsity pattern of the solution, which guarantees a single BS association for each user. Compared with the previously proposed method based on equal resource allocation, the proposed framework results in a feasible cell association scheme and yields a robust solution on resource allocation that satisfies the QoS constraints. Our simulations illustrate the impact of user's minimum rate requirements on cell association and demonstrate that the proposed approach achieves load balancing and enforces single BS association for users.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.80-83
• /
• 2016

In this paper, a simplified uplink transmission procedure is proposed for reducing energy consumption and improving lifetime of CIoT devices. In the proposed procedure, the CIoT devices register information on their service and traffic to the networks, and the networks statically allocate pre-defined amounts of radio resources when the CIoT devices have requested permission for their uplink transmissions. This paper provides details of the proposed procedure comparing with those of the current GSM procedure, and defines detailed operations of the devices and the networks for the proposed one. This shows that the proposed scheme can effectively support CIoT services on GSM networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1986-1993
• /
• 2015

We investigate the optimal resource and power allocation for device-to-device (D2D) communications in a multicell environment. When D2D links reuse the cellular radio resources, each D2D user will interfere with a cellular link and other D2D links, in its own cell as well as in adjacent cells. Under such situation, we propose a coordinated resource allocation scheme that can handle the intercell interferences as well as the intracell interference. For a given resource allocation, we also formulate a power optimization problem and present an algorithm for finding the optimal solution. The resource and power allocation algorithms are designed to maximize the achievable rate of the D2D link, while limiting the generated interference to the cellular link. The performance of the proposed algorithms is evaluated through simulations in a multicell environment. Numerical results are presented to verify the coordination gain in the resource and power allocation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1091-1101
• /
• 2012

Device-to-device (D2D) communication is expected to offer local area services with low transmit power and short link distance, even not via any infrastructures. These advantages will lead to the deployment of D2D systems in a massive scale, where the order of magnitude of D2D user density is higher than that of cellular user density. Network-assisted D2D systems, where D2D resources are managed by cellular networks, are unable to support the large number of D2D devices, due to the signaling overhead for control signals. In this case, no coordination can be an answer. This paper considers uncoordinated D2D systems, which is implemented with a number of D2D devices in a large scale. By analyzing the transmission capacity of D2D systems, we found a feasibility condition under which the uncoordinated D2D communications possibly coexist within cellular networks, sharing the uplink spectrum. In addition, we provide guidelines for the operational points of massive D2D communications, giving some knowledge about proper transmit power level and link distance of uncoordinated D2D.