• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.595-602
• /
• 2003

In this paper, we proposed new buffer management and cell scheduling scheme of GFR service for improving fairness of TCP/IP traffic in ATM networks. The proposed algorithm used untagged cell, which came to ATM switch, to decide the policy for discard of frame and what kind of VC cell it would serve. Performance analysis through the simulation present that proposed scheme can meet fairness 2 (MCR Plus equal share), which are not met by conventional scheduling mechanism such as WRR. Also, proposed scheme is superior to WRR about 30% in throughput and more efficiency in fairness criteria.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.538-545
• /
• 2014

This paper proposes a coordinated multi-point (CoMP) based dynamic transmission scheme in a downlink multi-ship network, where a central ship selects a ship in order to maximize the utility function. The proposed scheduling scheme dynamically decides to the usage of the coordinated multi transmissions and selects a user to be served for every frame, in order to the utility function on the basis of the throughput and fairness. In particular, the proposed utilify function based scheduling scheme aims to increase the quality of service of ships at the edge of cells. Under the proportional fair scheduling, the simulation results show that the proposed utility function-based scheduling improves the throughput of the ships at the cell edge with the little sacrifice of the system capacity.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.393-398
• /
• 2010

For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.667-676
• /
• 1995

In ATM traffic multiplexing, the cell clumping and the cell dispersion are occured due to the cell delay variance(CDV) which changes the traffic characteristics. These cell variances increase the burstiness of t.he cell streams and make the network congested. The function of the traffic shaping is necessary to transmit the input streams into the networks or into the traffic policing schemes with some intevals. Most of the existing studies regard the input traffics as the traffic with the identical characteristics. In this study, the traffic shaping is processed by considering the traffic characteristICS with t.he loss-sensitive traffic and the delay-sensitive traffic. The traffic shaping model and the traffic shaping algorithm which considers the" characteristics of input streams have been presented. The traffic effect On t.he CDV size is also studied. The proposed scheme is compared to Virtual Scheduling Algorithm(VSA) and the efficiency of the proposed scheme is evaluated. According to the simulation results, t.he mean delay is decreased about 12% in delay-sensitive traffic and the traffic burstiness is decreased about 11 % in loss-sensitive traffic.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.71-78
• /
• 2005

Nowadays, the demand of HPI(High-speed Portable Internet) has been gradually increased to support the various services of high speed wire line internet such as xDS. HPI can support high speed internet in anyplace, anytime. For successful development of HPI, the performance should be evaluated according to the cell size and/or the number of users and cell design should be carried out based on these criteria. The previous cellular systems using CDMA technique focus on the establishment of link based on power control but HPI systems consider the QoS (Quality of Service) and its performance based on the scheduling technique. The results from the system level simulation show that the throughput is sensitive to the cell size and the number of users has little impact on it. Moreover, the variation of service delay is more sensitive to the number of users but less to the cell size.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.70-73
• /
• 1998

This paper present a new priority control mechanism which is to balance the cell loss rate by measuring, in real time, the number of discarded cells in the queuing system with a different loss priority for each class of service such that each class of service meets its cell loss rate requirements. And, to reduce the delay rates we modified existing cell scheduling scheme. Throughout the computer simulation, the existing methods and proposed scheme is compared with respect to cell loss rate and average delay time. In the result of simulation, the proposed scheme have more improved performance than the other schemes with respect to cell loss rate and average delay time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.759-760
• /
• 2013

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.130-133
• /
• 1998

A imput buffer typed ATM switch and an appropriate cell-scheduling algorithm are necessary for avoiding output blocking and internal blocking respectively. The algorithm determining a set of non-blocking data cells from the queues can greatly affect on the switch's throughput as well as the behavior of the queues. In this paper bit pattern optimization combined with the Token method in presented in order to improve the performance of ATM switch. The digital Hopfield neural cell scheduler is designed and used for the maximum numbers of cells in real-time

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.135-142
• /
• 1994

생산시스템을 구성하는 자동화 요소들을 물리적으로 연결하는 물류시스템은 공장자동화를 구축하는데 핵심 요소로서 통합시스템 운영차원에서의 체계적인 정보구조를 가져야 한다. 따라서 본 연구에서는 물류시스템을 대표하는 AS/RS와 AGV시스템의 제어 Protocol 해석과 cell level에서 관리되어야 할 정보를 분석하여 정보흐름을 중심으로 한 물류시스템용 통합정보체계를 설계하였다. 또한, 물류 cell level의 통합차원에서 필요로 하는 제어정보 및 감시정보의 정의와 시스템 scheduling에서 고려될 상황정보를 설계하였다.