• KIEAE Journal
• /
• v.6 no.2
• /
• pp.67-74
• /
• 2006

As sustainable design technologies, advanced daylighting systems with lightshelves have been developed and are currently under monitoring the daylighting performance. This study aims to evaluate the comparative daylighting performance of sloped lightshelf and conventional glazing window with mock-up model, reconstructed as a prototype of Korean office building, sized $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and $1.8m{\times}4.8m$($w{\times}h$) for the south facing side-window was installed on the rooftop of engineering building, Kyung Hee University in Korea. It has an identical configuration of reference room and the test room. For the test room, the sloped type lightshelf system was designed as 10mm transparency sheet glass, tilt angle degree $29^{\circ}$, and total sized 1.28m (interior length 0.88m, exterior length 0.49m). It consisted of daylighting collector, entrance glazing and reflector. To assess daylighting performance, the totally 37 measuring points for illuminance and 2 view points of luminance were monitored in every 30 minutes from 12:00 to 15:00. For the detailed analysis, photometric sensors of each room were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point). Luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio, uniformity, and luminance are discussed.

• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.123-131
• /
• 2018

The design of the healing space provides people with tranquility and relaxation. It restores the tired body and provides the resilience of life. We have established the importance and value of healing through the meaning of healing and foreign cases. that humans come from nature and return to nature I think it is extremely inevitable, and while living, They set their goal and finish it gradually. Then they reach the goal. You can enjoy the effect of healing by creating an atmosphere of nature that comes from nature and living in it. The use of wood inside the building is the most comfortable healing condition, and as you can see from the case of Japan, The building of Sunny Hills made of wood outside reminds me of a magpies house. Indoor desk or book case made of wood make, warmer at mosphere, and the effect of healing becomes even greater if you take the plants. In the ceiling, if you paint pictures of clouds, trees, sun, etc., and apply blue or pink color that makes you relax, then the effect of healing is doubled. Through this study, I could forming living space being in touch with nature and using natural materials which is basic of healing an bring the effect of healing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.717-722
• /
• 2010

Supersonic/Hypersonic wind tunnel is a facility which is intended to test and to observe the physical phenomena around a model by creating supersonic flow in the test section. In designing an airplane, the wind tunnel test is demanded to analyzing aerodynamic characteristics of the model without making a prototype. In this research, the model aerodynamic facility(MAF) is modified for the purpose of increasing running time and its functionality. New pneumatic valves for remote control was installed for safety requirement, and new air tanks was installed on MAF as well. A pipe system is also modified to use those new valves and tanks, and the ceiling and side glasses of the test section are switched to ones with the larger surface area. After the MAF modification, a test is performed at Mach 2, 3 and 4. In this test, shadow graph technique, one of the flow visualization methods, is used to visualize supersonic flow field. The pressure in the settling chamber and working section at Mach 2, 3 and 4 was measured in each case. As a result, the possible model size and running time are obtained.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.11
• /
• pp.770-775
• /
• 2007

Although these days application of heat recovery ventilation and improved kitchen ventilation system came into wide use in mixed-use residential buildings and exclusive residences, there are not enough ventilation systems except the local ventilation of kitchens and rest rooms. It is very important part to regulate and distribute correct air flow rate for controlling air change rate. The purpose of this study is to investigate the application of distributor at house ventilation system by comparing a duct system with out distributor and with distributor. The results of this study are as follows. (1) When using distributor though the size of duct diameter is reduced rapidly, the pressure loss doesn't rise largely. The pressure loss without distributor is 4.08 mmAq, the pressure loss with distributor 4.10 mmAq. (2) To use distributor can reduce materials of duct and secure enough ceiling space by reducing duct diameter. (3) Diameters and air flow paths of distributor on the design stage are important part for accurate air flow rate.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.293-306
• /
• 1991

During the last few years recommendations or regulations concerning permissible noise levels on shirts have been issued by the authorities in most countries. For these reasons the need for useful and accurate noise prediction computer programs has been emphasized. A noise prediction program can make it possible to find the most economical solution to achieve a certain noise requirement. This paper attempts to develop a noise prediction computer program using statistical energy analysis(SEA). In this paper, the SEA is used to predict the sound transmission loss for airborne noise and the vibration amplitude of the panel consisting of ship spaces such as floor, wall, and ceiling for structureborne noise. And in order to verify the prediction, a small passenger vessel, G/T120 tons, is selected. It has been shown that the prediction is capable of giving results in good practical agreement with measurements and therefore it is useful for predicting the nolle levels in ships and establishing the countermeasures at early design stage.

• Journal of Korea Port Economic Association
• /
• v.26 no.4
• /
• pp.310-328
• /
• 2010

The purpose of this study is to contribute to reducing distribution costs, enhancing export price competitiveness, and improving distribution system in LCL cargo, by pursuing the present status of warehouse storage fee, a cause & problem about excessive hike, and a plan for stabilizing warehouse storage fee, as for LCL Cargo, which is imported by sea. The plans for rationalizing warehouse storage fee in LCL cargo were suggested the adoption of the ceiling system for warehouse storage fee rate, the obligation of offering information on warehouse storage fee rate, the eradication of illegal rebate, the improvement in distribution system of the imported LCL cargo, a scheme for the importer to designate a bonded warehouse and forwarder, the introduction of the tentatively named 'LORAS(Lowest Rate Service),' and formation of the dispute coordinating committee for warehouse storage fee.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.75-83
• /
• 2015

Objective: The aim of this study is to suggest the standard of the direction sign on the pendant switch of overhead cranes which can reduce human errors in control. Background: A great number of crane accidents occur in industries. One of the major causes of the accidents is the mistake in the control of cranes by confusing the orientation of crane movements. Nevertheless, three different direction sign styles, 'East, West, South, North (EWSN)', 'Forward, Backward, Left, Right (FBLR)', and arrows for four directions are used without standardization. Method: An overhead crane simulator was installed for a laboratory experiment. It could move along six directions by the control of a pendant switch. 90 participants were evenly assigned to the three different conditions of direction sign styles. The participants were asked to control the pendant switch according to the continuously appearing 16 direction signs on a monitor ahead. The participants were allowed to refer an orientation sign board on the ceiling representing correct movement directions of the overhead crane simulator. Results: The direction sign style, 'EWSN', showed statistically significant better performance in task completion time and number of errors than the other sign styles. The direction sign style, 'EWSN', adopting the cardinal direction system, made the participants clear in direction controls after customizing to the crane movements. However, the direction sign styles, 'FBLR' and the arrows adopting the relative direction system made conflicts in direction controls due to the egocentric view of human. Conclusion: The direction sign style, 'EWSN', is the most appropriate for the standardization of the direction sign on the pendant switch of overhead cranes. Application: The results of this study can be applied to the standardization of direction sign in the legal notification on the safety certifications of crane manufacturing.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.477-483
• /
• 2020

The rehabilitation methods used in existing concrete box structures rely on the method of attaching the repair material to the section of the structure with a spray equipment. In the case of ceiling or wall parts, the adhesion force to the repair material may be reduced by the gravity and dead load after construction. In subway structures, vibration causes a problem that reduces the initial adhesion. Supplementary measures are needed as the quality of repair varies depending on the worker's proficiency and construction environment. In this study, mechanical pressurization equipment was developed that can apply a certain pressure after construction of a repairwork to solve problems such as reduction of adhesion of repair materials by gravity and variation of repair quality by labor work. To find out the effect of the pressurized equipment, a chamber similar to the field conditions was constructed to measure the attachment strength different from the pressurized condition, the section, and the environmental conditions. The pressurization differed from the other parts, but the adhesion strength of up to 70% was increased.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.233-250
• /
• 2010

Jukseoru as an official pavilion of the government, one of the eight sceneries in Gwndong Area, is located on the cliff over Osipcheon River. This paper interprets form and space of the pavilion with restored old life by analyzing pictures of official party in 18th century in Chosun Dynasty. Every part of the space is occupied by persons by the class and duty: the pricipal guest, nobles, subordinates, gisaengs, court musicians, and guards from the high to the low and from the inside to the outside. Applying the analysis to the Jukseoru pavilion, the noblest lord takes sit on the platform in front of folded screen at main bay under checked ceiling, enclosed by low timber beam. The next northern end bay is a place for subordinates' and servants' waiting for preparation for rice wine. Southern end entrance bay is not a result of later addition but deliberately and originally made for lower place outside the railing of wooden floor: for a waiting woman gisaeng, and subordinates. Outside under the eaves on the platform with bedrock, artificial stone and soil is a place for court musicians, subordinates, and guards. The yard in front of the building is a place for preparing meals by cookers. Every detailed ornamental form is different each other by the place for the occupied class. Existing theory tells that the building, 7 bays gable-and-hipped roof, is a result of structural extention of 2 bays at the 5 bays gabled-roof. However, through the interpretation of old pictures and application to the pavilion, the present Juseoru is not a result of later structural addition, but deliberately designed creation suited to life in hierarchical traditional society.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.121-135
• /
• 2010

This study was to analyze the architectural characteristics and facade construction of brick masonry auditorium through the Auditorium of Namsan Primary School in 1936. The results of this study were described separately as follows. 1. The auditorium is located away from the school buildings, and its plane is a chamber of rectangle type with an entrance installed on each of the four sides. 2. The external appearance is Renaissance eclectic style, laid red bricks on the lower wall of the window and having a mansard roof. The front and the rear are symmetric with respect to the projected wall at the center. 3. As to the structure of the building, a concrete lower wall was built on the concrete continuous footing, and the brick wall was constructed on the lower wall. The roof is queen post roof truss, and the wall girders were installed on the brick wall. 4. The auditorium has had a number of repairing and maintenance works, which changed the roof and windows outside and the floor, walls, ceiling, etc. inside. 5. The decorative elements of external appearance include lower wall, brick wall, entrances, windows, roof, and dormer windows. The brick wall gives verticality and solidity to the surface of the wall, and the lower wall and wall girders are connected like a cornice of the wall. The surface of the mansard roof and dormer windows express a stable vertically oriented shape.