• 한국전자파학회논문지
• /
• 제16권4호
• /
• pp.366-372
• /
• 2005

본 논문에서는 $2,630\;\cal{MHz}\~2,655\;\cal{MHz\$의 위성 DMB(Digital Multimedia Broadcasting)의 지상 중계기 시스템에 적합한 낮은 부엽레벨과 높은 전후방 비를 갖는 슬롯배열 안테나를 제안하였다. 중계기용 안테나는 시스템의 특성상 고이득과 시스템간의 신호 간섭을 줄이기 위해 충분한 격리도가 확보되어야 하며, 이를 위해서는 안테나의 부엽레벨을 억제시키고, 전후방 비는 증대시켜야 한다. 제안된 안테나는 도파관 구조의 직접급전이 가능한 CBSA(Cavity-Backed Slot Array) 안테나이다. 일반적인 마이크로 스트립 급전라인을 이용한 구조와는 달리 유전체 손실이나 급전라인의 손실이 없는 공기를 매질로 하므로, 고출력에 적합하며, 고효율을 가진다. 또한 tapered 배열 방식과 최적화된 수직 반사판을 이용하여 부엽레벨 및 전후방 비를 개선하고 이득을 증대시켰다. 제작 및 측정을 통하여 부엽레벨은 수평 및 수직면에서 각각 $-33.24\;\cal{dB}$ 이하, $-35.78\;\cal{dB}$ 이하를 얻었고 전후방비는 $37.84\;\cal{dB}$ 이상, 이득은 전 대역에서 $17\;\cal{dBi}$ 이상을 얻었다.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.1-8
• /
• 2020

In this study, the optimal design of the multi-cavity mold layout and packing pressure for the automobile TCU connector cover is determined based on the injection molding analysis and the desirability function method for multi-characteristic optimization. The design characteristics to be optimized are the warpage and sink marks of the product, the scrap of the feed system, and the clamping force. The optimal design is determined by performing injection molding analysis and desirability analysis for design alternatives defined by a complete combination of five mold layouts and six-level packing pressure. The optimal design shows that the desirability values for individual characteristics are quite high and balanced, and the resulting values of individual characteristics are satisfactorily low.

• 한국위성정보통신학회논문지
• /
• 제11권1호
• /
• pp.37-40
• /
• 2016

We designed an antenna structure with the circular polarization metamaterial superstrate which increases the directivity of the primary antenna as a lens. The metamaterial superstrate removes the necessity of the array antenna and complicated feed. Plus, it provides the Fabry-perot cavity with the circular polarization. With regard to the primary antenna, a CRLH antenna is adopted to have the size-reduction from the conventional half-wavelength patch antenna.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.194-197
• /
• 2004

In the tube hydroforming process, a tube is placed into the die cavity and the ends of the tube are sealed by fixing the axial cylinder piston into the ends. Then the tube is pressurized with a hydraulic fluid and simultaneously the axial cylinders move to feed the material into the expansion zone. Therefore, the quantitative relationship between process parameters such as internal pressure and feeding amount and hydroformabillity, is hard to establish because of their high complexity and many unknown factors. In this study, the empirical and the quantitative relationship between process parameters and hydroformabillity are analyzed by fuzzy rules. Fuzzy expert system is an advanced expert system which uses fuzzy rule and approximate reasoning. Many process parameters are converted to the quantitative relationship by use of approximate reasoning of fuzzy expert system. The comparison between experimentally measured hydroformabillity from hydroforming experiments and the predicted values by fuzzy expert system shows a good agreement.

• 한국동물위생학회지
• /
• 제44권1호
• /
• pp.45-49
• /
• 2021

A 23-month-old Holstein cattle showed excess salivation and reluctance of walking and suddenly died after forced sudden movements. Grossly, numerous fibrous adhesions were present within cranial abdominal cavity including the reticulum and diaphragm and thoracic cavity involving lungs, pericardial sac, and heart. A perforation made by a 10 cm-long sharp-ended wire was detected in the reticulum. Histopathologically, fibrous suppurative epicarditis and myocardial necrosis were observed. Fibrosis with neovascularization were found in lungs, spleen, and liver. And granulomatous reticulitis was observed. For differential diagnosis, no pathogenic bacteria were detected through microbiological tests and PCR results were also negative for bovine susceptible pathogenic antigens. Based on the gross and histopathological examination, we diagnosed this case as chronic traumatic pericarditis. Cattle are inquisitive and prone to swallow various kinds of metallic foreign bodies since they do not use their lips. Therefore, avoiding ingestion of metallic objects in animal feed and animal areas by careful environmental management of farms is required and farmers should give the adequate minerals and vitamins into the feeds not to lick or shallow foreign bodies in case of mineral deficiency. For veterinary practitioners, physical examination, blood tests, and diagnostic imaging (X-ray and Ultrasonography) are required for an exact diagnosis. Furthermore, placing the magnets in rumen would be effective for prophylactic administrations.

• 대한전자공학회논문지TC
• /
• 제44권3호
• /
• pp.7-17
• /
• 2007

개구면 결합 공진기 급전 마이크로스트립 방향성결합기의 특성을 해석하였고, 최적 설계를 위한 효율적인 설계 이론을 제시한다. 이러한 목적을 위해 단순하고도 정확한 등가 회로를 도출하였고, 도출된 등가 회로를 바탕으로 결합기의 설계 수식을 유도하였다. 여러 구조적 설계 변수를 결정하기 위해, 유전 알고리즘과 Holder-Mead 방법에 기반한 진화적 이종 최적화 방법을 사용하였으며, 제안한 설계 방식과 최적화 설계 방법의 타당성을 검증하기 위해 10 dB 방향성 결합기를 설계, 제작하였다. 측정된 결합기의 결합 계수는 3 GHz에서 10.3 dB 였고, 반사계수와 isolation은 각각 31.8 dB 와 30.5 dB 였다. 또한 출력단과 결합단 사이에 $90^{\circ}$ 위상 차이를 보였다. 측정치와 설계치의 일치도는 제안한 해석 방법과 등가 회로 및 최적화 설계의 타당성을 검증해 준다.

• Fisheries and Aquatic Sciences
• /
• 제18권3호
• /
• pp.301-309
• /
• 2015

Chub mackerel, Scomber japonicus, larvae and juveniles were reared from hatching to 35 days after hatching (DAH), and the development of their digestive systems was histologically investigated. The larvae were initially fed on rotifers and Artemia nauplii starting around 19 DAH, and thereafter on Artemia nauplii, fish eggs, and a formulated feed mixture. The primitive digestive system differentiated at 3 DAH; the digestive tract was distinctively divided into the buccopharyngeal cavity, esophagus, stomach, air bladder, intestines, and rectum. The gastric gland and pyloric caeca first appeared at 5 and 7 DAH, respectively. The stomach was divided into cardiac, fundic, and pyloric regions in the preflexion phase. The number of gastric glands and pyloric caeca, as well as the volume of the gastric blind sac increased markedly, with development continuing into the juvenile stage. The precocious development of the digestive system during the larval period might be related to the early appearance of piscivory, which is able to support high growth potential. The organogenesis results obtained for this precocial species represent a useful tool to aid our understanding of the physiological requirements of larvae and juveniles to ensure optimal welfare and growth under aquaculture conditions, which will improve current rearing practices of this scombrid species.

• 대한수의학회지
• /
• 제47권3호
• /
• pp.299-302
• /
• 2007

Neoheterobothrium hirame (N. hirame) is a large blood-feed gill-worm infecting the highly prized olive flounder. The present study was reported the occurrence and elimination of Neoheterobothrium infection from young cultured oliver flounder in the western coast of Korea. Flounder (weight 18-25 g, length 10-15 cm) were obtained from a cultured farm at Taean of Korea at May 2006. A lot of flounder died with serious anemia. We isolated N. hirame from the buccal cavity wall of dead flounder. Adult parasites were 5-15 mm in total length, with 4 pairs of clamps on the pedunculated haptor and isthmus region embedded in host tissue, while immature and sub-adults were identified the attachment to the gill filaments, rakers and arches with the clamps. All fish with infection were treated with 8% NaCl-supplemented seawater for 1 and 10 min at $22^{\circ}C$, respectively. The significant reduction in mortality (6.7%) was observed among fish treated with 8% salt water for 10 minutes, when compared with that of non-treatment group (100%).

• 전자공학회논문지D
• /
• 제36D권7호
• /
• pp.1-8
• /
• 1999

3차원 분산 유한차분 시간영역 법을 이용하여 지하 침투 레이더에 대한 완전한 전자기적인 모의계산을 구현하였다. 제시된 모의계산 모델에는 공진기를 배후에 두고 있는 저항으로 중단된 bow-tie 안테나가 포함되어 있다. 그리고 수신안테나의 응답을 계산하기 위하여 안테나의 입력 임피던스와 급전선의 특성 임피던스로 구성된 등가회로를 사용하였다. 자체 제작한 bow-tie 안테나가 포함된 GPR 시스템을 사용한 실제 측정은 PVC 탱크에 담겨진 마른 모래 위에서 수행되었다. FDTD 모의계산 결과가 실제 측정자료와 거의 일치함을 확인할 수 있었다.

• 실천공학교육논문지
• /
• 제9권2호
• /
• pp.119-124
• /
• 2017

사출성형 시 유압실린더의 힘으로 스크류가 앞으로 전진하는 동안, 금형의 러너시스템은 성형품 형상의 캐비티 내를 충진시키는 유로로 용융된 수지의 충진, 패킹과정에 관계되며, 이는 스프루(sprue), 러너(runner), 게이트(gate)에 의해서 성형품의 외관, 수지의 물성, 치수 정밀도 및 성형 사이클 등에 큰 영향을 준다. 러너, 게이트 설계가 잘못된 피드시스템은 다양한 성형불량을 일으키므로 이를 방지할 수 있는 최적의 러너밸런스를 유지하는 것이 중요하다. 사출금형을 제작하는 업체에서 응용할 수 있는 실무적인 금형기술 지식을 향상시키기 위해서 기술적인 애로분야에 대한 기술지도를 바탕으로 금형기술 과정의 훈련모델을 제시한다.