• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.172-173
• /
• 2015

Construction project involves numerous repetitive operations. Especially in high-rise and apartment houses projects, the amount of repetitive operations increase and a preceding operations delay causes serious damage to the total duration of the project. This study deducts work delay factors by site engineer interview and survey. The study analyzes daily report data to deduct crucial processes affecting masonry work which has been investigated to be one of preliminary processes conducted at the beginning of finish work.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2007.04a
• /
• pp.302-309
• /
• 2007

To conduct statistical process control needs the assumption that the process data are independent. However, most of chemical processes, like a semi-conduct processes do not satisfy the assumption because of autocorrelation. It causes abnormal out of control signal in the process control and misleading process capability. In this study, we introduce that Shore's method to solve the problem and to find the optimal subgroup size to estimate variance for AR(l) model. Especially, we focus on finding an actual subgroup size for small samples using simulation. It may be very useful for statistical process control to analyze process capability and to make a Shewhart chart properly.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.121-127
• /
• 2008

Micro end-milling has been becoming an important machining process to manufacture a number of small products such as micro-devices, bio-chips, micro-patterns and so on. Despite the importance of micro end-milling, many related researches have given grand efforts to micro end-milling phenomenon, for example, micro end-milling mechanism, cutting force modeling and machinability. This paper strongly concerned actual problem, micro tool deflection, which causes excessive machining errors on the workpiece. To solve this problem, machining error prediction method was proposed through a series of test micro cutting and analysis of their SEM images. An iterative algorithm was applied in order to obtain corrected tool path which allows reducing machining errors in spite of tool deflection. Experiments are carried out to validate the proposed approaches. In result, remarkable error reduction could be obtained.

• Journal of Industrial Convergence
• /
• v.3 no.2
• /
• pp.73-84
• /
• 2005

Musculoskeletal Disorders are usually caused or aggravated by poor work processes and unsuitable working conditions - that involve repetitive or forceful movements or the maintenance of constrained or awkward postures. The condition is characterized by discomfort and persistent pain. Case and Demographic Characteristics for Work-related Injuries and Illnesses Involving Days Away From Work, 2003. U.S" was examined. Causes of musculoskeletal disorders for assembly line workers were carpal tunnel syndrome(CTS), tendonitis, low back pain, and occupational stress. Recommendations of improvement for productivity are redesign of working conditions, exercise, prevent of musculoskeletal disorders and avoiding stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.538-543
• /
• 2016

For a good product quality and plant safety, it is necessary to implement the on-line monitoring and diagnosis schemes of industrial processes. Combined with monitoring systems, reliable diagnosis schemes seek to find assignable causes of the process variables responsible for faults or special events in processes. This study deals with the real-time diagnosis of complicated industrial processes from the intelligent use of multivariate statistical techniques. The presented diagnosis scheme consists of a classification-based diagnosis using nonlinear representation and filtering of process data. A case study based on the simulation data was conducted, and the diagnosis results were obtained using different diagnosis schemes. In addition, the choice of future estimation methods was evaluated. The results showed that the performance of the presented scheme outperformed the other schemes.

• Journal of Korean Society for Quality Management
• /
• v.15 no.2
• /
• pp.10-19
• /
• 1987

Statistical control charts are useful tools to monitor and control the manufacturing processes and are widely used in most Korean industries. Many Korean companies, however, do not always obtain desired results from the traditional control charts by Shewhart such as the $\overline{X}$-chart, X-chart, $\widetilde{X}$-chart, etc. This is partly because the quality charterstics of the process are not distributed normally but are skewed due to the intermittent production, small lot size, etc. In the Shewhart $\overline{X}$-chart, which is the most widely used one in Korea, such skewed distributions make the plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such shortcomings in nonnormally distributed processes, a distribution-free type of confidence interval can be used, which should be based on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for nonnormal distributions may be easily analyzed. Control limits and central lines are given for the more famous nonnormal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, and Truncated-normal distributions.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.24-24
• /
• 2003

Actin filament is a major cytoskeleton in synapses and highly enriched in the presynaptic and postsynaptic compartments. Their roles in synaptic vesicle recycling and synaptogenesis have been extensively studied but functional evidence whether actin filaments are involved in these processes is as yet lacking. Dysfunction in synaptic vesicle recycling causes various diseases such as Alzheimer's disease, Schizophrenia, Bipolar disease, depression etc.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.73-77
• /
• 1999

Revolutionary changes on multimedia, network and PDA(Personal digital assistants) causes PCB(Printed circuit beard) manufacturers to change their attitudes to product. Traditional idea for current market such as price, market, and service has collapsed down and new digitalization urges PCB manufacturers to deal with new technologies, shorter lead time with reasonable price, high qualities. Therefore PCB manufacturers have an effort to develop new marketing, products, processes for low cost to keep up pace with assembly makers.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.242-247
• /
• 2012

In the determination of suitable frame sizes associated with dynamic framed slotted Aloha used in radio frequency identification tag identification processes, the widely imposed constraint $L=2^Q$ often yields inappropriate values deviating far from the optimal values, while a straightforward use of the estimated optimal frame sizes causes frequent restarts of read procedures, both resulting in long identification delays. Taking a trade-off, in this paper, we propose a new method for determining effective frame sizes where the effective frame size changes in a multiple of a predetermined step size, namely ${\Delta}$. Through computer simulations, we show that the proposed scheme works fairly well in terms of identification delay.

• Transactions of Materials Processing
• /
• v.3 no.2
• /
• pp.147-155
• /
• 1994

The service life of tools in metal forming technology is to a large extent limited by wear and fatigue fracture of the active elements. This presents a basic request for tool cost minimization and reduction of extensive machine down time, caused by premature tool failure. Currents developments are dominated by steps to reduce the causes of tool failure. A main problem of forming technology remains the insufficient reliability of tools due to a large and incalculable life time fluctuation. Only a systematic investigation of the failure mechanisms and operational loading of tools can lead to future improvements in tool layout, that is optimization of tool usage.