• 대한한방소아과학회지
• /
• 제15권2호
• /
• pp.101-109
• /
• 2001

A clinical observation by the tongue change as a diagnostic method was made on 36 week children visited to Dongeui Oriental Medical Hospital from August. 2001 to December 2001 and the observed results were summarized as follows. 1. Their symptoms have been observed with sequences of Resparatory diseases, Digestive, Neuromotor, Psycho-neurological, Urogenital diseases 2. Distribution of sex : male 22 cases, female 14 cases 3. Distribution of age : 0-6 years 24 cases, 7-18 years 12 cases 4. The texture of tongue was resulted in tongue color in pink-28 cases, red-8 case, and shape in thin-18 cases, swelling-6 cases, a fissured patten-5 cases, a prickly patten-4 cases, and a map patten-3 cases, and fur of the tongue in thin-26 cases, moisten-8 cases, deep-2 cases, and coating color of the tongue in thin and whitish-15 cases, thin and yellowish-9 cases, lack-8 cases, deep and whitish-4 cases. 5. The texture of tongue in connection with weak children was come out mostly normal state and the rest red color, a fissured patten, a prickly patten, deep coating, thin and yellowish etc appeared to cause of slight damage due to exogenous pathogenic fators and due to internal injury.

• 보존과학연구
• /
• 통권30호
• /
• pp.47-61
• /
• 2009

Cultural heritages are affected by various environmental factors. Main factors are temperature, humidity, light and indoor air pollutants such as ozone, nitrogen oxides. Especially humidity condition is very important. Low humidity condition can cause contraction and high humidity condition can lead to growth of microorganism. This study is conducted to appraise an applicability of the Humidity Indicator which is one of the simple method for humidity control. The Humidity Indicator shows the humidity conditions through color change. Therefore, photometer was used to correctly measure the color change of Humidity Indicator. As a result of lab test, Humidity Indicators was stabilized after one hour from en exposure in a certain humidity condition and the indicators indicated clear correlations between color changes of Humidity Indicators and humidity conditions. Some Humidity Indicators which had been selected through the lab tests were applied to preservation facilities of cultural heritages and the indicators indicated closed correlations with humidity conditions in indoor of facilities.

• 한국응용과학기술학회지
• /
• 제19권3호
• /
• pp.189-197
• /
• 2002

The color stability and purity from OLED is of current interest. Aggregation of dyes alters the device color after fabrication of the devices. Exciplex and electroplex formations have been proposed to explain the aggregate color change. We investigate the possibility of exciplex formation and propose the new electroplex state that can cause the bathochromic shift of the electroluminescence spectrum from the devices with TPD/PBD layers. The photoluminescence maximum of the device was 420nm, and the electroluminescence maximum of the device to became 480nm. The bathochromic shift cannot be attained with photoluminescence study with highly concentrated TPD/PBD mixture. This clearly indicates that the 480nm spectrum of the devices is not resulted from the exciplex formation with TPD and PBD. We observed the overshoot in EL spectrum from the OLEDs. The most intense overshoot was observed at 460nm, which may be due to the aggregates that are formed after the electric field has been removed from the devices.

• The Journal of Advanced Prosthodontics
• /
• 제14권1호
• /
• pp.56-62
• /
• 2022

PURPOSE. The aim of this study was to investigate shade changes in fully- and pre-crystalized CAD-CAM lithium disilicate crowns after the required and additional firing processes. MATERIALS AND METHODS. One hundred and five crowns of shade A1 with high translucency were milled out of CAD-CAM lithium disilicate blocks and categorized as follows (n = 15): (1) restorations fabricated from Straumann n!ce with no additional sintering process; (2) restorations fabricated from Straumann n!ce with one additional sintering process; (3) restorations fabricated from Straumann n!ce with two additional sintering processes; (4) restorations fabricated from Amber Mill with one sintering process; (5) restorations fabricated from Amber Mill with two sintering processes; (6) restorations fabricated from IPS e.max CAD with one sintering process; (7) restorations fabricated from IPS e.max CAD with two sintering processes. All restorations were evaluated with a color imaging spectrophotometer. RESULTS. All restorations presented some color alteration from the original shade both after a single and after two firing processes. CONCLUSION. The required and additional sintering processes for restorations fabricated with chairside CAD-CAM lithium disilicate blocks cause an alteration of the original shade selected. Shade A1 high translucency restorations tend to change to a more yellowish B1 shade after a sintering process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.251-252
• /
• 2018

Cool roof coating materials generally use white color which has the highest reflectance, but it is a tendency to apply various colors because it can cause glare and fatigue of a nearby building user due to the urban beauty and high reflection. This study when applying color diversity material cool roof coating was carried out as a basic research for the degree of solar radiation reflectance change. Experiment result. As a result of the measurement of the reflectance of each specimen, white showed the best reflectance in the near infrared region, and black had the lowest reflectance. Also, in case of brown, it was confirmed that the reflectance of solar radiation in the near extrinsic region is lower than that of gray.

• 패션비즈니스
• /
• 제8권5호
• /
• pp.125-135
• /
• 2004

Hair coloring before the 1980s was mostly to hide white hair by dying in black. With the introduction of color TV, however, the size of the coloring market has been expanding. Nowadays, artificial synthetic dyes are widely used, which, though advantageous in many points, have problems such as harmful effects on the human body, carcinogenesis, environmental contamination and damage on hair. On the contrary, natural vegetables obtained from Curcuma Longa L., A. catechu, polygonum indigo, henna, etc. are little harmful to hair or the skin of the head and cause few environmental problems. In addition, as they are natural materials collected from nature, they are considered positively by consumers. Thus the present study started from the necessity of research on the convenient use of environment?friendly and side-effect-free natural dyes, coloring technology for reproducing original color, the improvement of adhesion rate, etc. From the present research were obtained yellow color from Curcuma Longa L., brown from A. catechu, blue from polygonum indigo and orange from henna. It is expected that, based on materials from previous researches, there may be more researches on the use of natural dyes as hair colors.

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권3호
• /
• pp.130-139
• /
• 2013

This paper proposes a new approach for enhancing digital images based on red channel information, which has the most analogous characteristics to invisible infrared rays. Specifically, a red channel in RGB space is used to analyze the image contents and improve the visual quality of the input images but it can cause unexpected problems, such as the over-enhancement of reddish input images. To resolve this problem, inter-channel correlations between the color channels were derived, and the weighting parameters for visually pleasant image fusion were estimated. Applying the parameters resulted in significant brightness as well as improvement in the dark and bright regions. Furthermore, simple contrast and color corrections were used to maintain the original contrast level and color tone. The main advantages of the proposed algorithm are 1) it can improve a given image considerably with a simple inter-channel correlation, 2) it can obtain a similar effect of using an extra infrared image, and 3) it is faster than other algorithms compared without artifacts including halo effects. The experimental results showed that the proposed approach could produce better natural images than the existing enhancement algorithms. Therefore, the proposed scheme can be a useful tool for improving the image quality in consumer imaging devices, such as compact cameras.

• Korean Journal of Radiology
• /
• 제21권4호
• /
• pp.462-470
• /
• 2020

Objective: To demonstrate that human visual illusion can contribute to sub-endocardial dark rim artifact in contrast-enhanced myocardial perfusion magnetic resonance images. Materials and Methods: Numerical phantoms were generated to simulate the first-passage of contrast agent in the heart, and rendered in conventional gray scale as well as in color scale with reduced luminance variation. Cardiac perfusion images were acquired from two healthy volunteers, and were displayed by the same gray and color scales used in the numerical study. Before and after k-space windowing, the left ventricle (LV)-myocardium boarders were analyzed visually and quantitatively through intensity profiles perpendicular the boarders. Results: k-space windowing yielded monotonically decreasing signal intensity near the LV-myocardium boarder in the phantom images, as confirmed by negative finite difference values near the board ranging -1.07 to -0.14. However, the dark band still appears, which is perceived by visual illusion. Dark rim is perceived in the in-vivo images after k-space windowing that removed the quantitative signal dip, suggesting that the perceived dark rim is a visual illusion. The perceived dark rim is stronger at peak LV enhancement than the peak myocardial enhancement, due to the larger intensity difference between LV and myocardium. In both numerical phantom and in-vivo images, the illusory dark band is not visible in the color map due to reduced luminance variation. Conclusion: Visual illusion is another potential cause of dark rim artifact in contrast-enhanced myocardial perfusion MRI as demonstrated by illusory rim perceived in the absence of quantitative intensity undershoot.

• 방송공학회논문지
• /
• 제21권4호
• /
• pp.538-551
• /
• 2016

방송 제작현장에서는 영상 이미지 표현의 광원으로 Tungsten Halogen 광원이 주 광원으로 사용 되어 왔다. Tungsten Halogen 광원은 그동안 개발된 다른 광원보다 태양광원과 유사한 색 재현성으로 각광받아 왔지만 에너지 효율성의 문제점을 가지고 있었다. 최근 대체 광원으로 고효율의 에너지와 긴 수명의 LED광원이 방송 광원으로 주목받기 시작했다. LED광원은 독특한 발광원리 때문에 카메라를 통한 영상 이미지의 색 재현성과 광원에서 투사되는 빛의 질에 있어서 Tungsten Halogen광원과 다른 특성을 가지고 있다. 이런 특성은 LED광원이 방송 광원으로서 도입이 늦어지는 이유이다. 이에 본 연구에서는 LED 광원의 색 재현성과 빛의 질 특성인 평탄도를 측정하여 기준광원인 Tungsten Halogen과 비교하여 방송 광원으로써의 적합성에 대한 실험 데이터를 제시할 것이다. 또한 LED광원이 방송 광원으로서의 확산되기 위해서 필요한 점이 무엇인지 향후 과제와 기준을 제시하고자 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.863-864
• /
• 2005

In recent years, we use overdriving scheme to improve the response time of the liquid crystal. Since conventional overdriving scheme uses memory to perform ideal processing, it is desired to reduce system cost by decreasing the data stored in these SDRAMs. As a general compression method, quantization, sub-sampling and Block Truncation Coding ( BTC ) are used, which process data in block base and cause block effect. So we proposed new data compression method by color space conversion. Because this method compresses luminance and chrominance signal by different ratio, it can efficiently reduce error of block effect in decompression image.