• 제목/요약/키워드: catalyst layer

검색결과 357건 처리시간 0.025초

병열형가열부를 이용한 후막형 접촉연소식 가스센서 제조 (Fabrication of thick film type catalytic combustible gas sensor using parallel resistance heat source)

  • 박준식;이재석;홍성제;박효덕;신상모
    • 센서학회지
    • /
    • 제5권1호
    • /
    • pp.23-29
    • /
    • 1996
  • 본 연구에서는 스크린 프린팅 기술을 이용한 병렬저항열원을 갖는 후막형 가연성 가스센서를 제조하고, 메탄 가스에 대한 감도특성을 조사하였다. 알루미나 기판의 양면 위에 제조된 병렬형 백금 후막발열체는 후막형백금 저항체의 온도 감지 특성과 표면 특성을 조사하여 백금페이스트 TR7905 제품을 선정하였다. 제조된 백금 후막 발열체는 평균저항같이 $1.8{\Omega}$이고, TCR값은 $3685\;ppm/^{\circ}C$이었다. 제조된 백금 발열체상에 Pt과 Pd이 첨가된 촉매 페이스트를 제조하고 감지부는 Pt과 Pd가 첨가된 촉매를 스크린 프린팅하여 후막을 형성하고 열처리하여 제조하였다. 제조된 후막형 센서는 메탄 가스에 대해 4.3mV/1000ppm의 감도를 보였으며, 소비전력은 2.12W이었다.

  • PDF

재조합 아밀로수크라아제를 이용한 효율적인 폴리페놀 배당체의 합성 (Enzymatic Synthesis of Polyphenol Glycosides by Amylosucrase)

  • 박현수;최경화;박영돈;박천석;차재호
    • 생명과학회지
    • /
    • 제21권11호
    • /
    • pp.1631-1635
    • /
    • 2011
  • 재조합 아밀로수크라아제의 폴리페놀 배당체를 합성하는 능력을 검사하였다. 이 효소의 효소작용 특성에 근거하여 설탕을 기질로 사용하였으며 21 종류의 각기 다른 폴리페놀 화합물들이 수용체로 사용되었다. 당 전이 반응은 사용한 폴리페놀에 따라 하나 또는 두 개의 주요 폴리페놀 배당체를 합성하였다. 합성된 폴리페놀 배당체들은 박막 크로마토그래피법을 이용하여 확인되었고, 새로이 합성된 배당체의 구조는 당 전이 작용 특성에 근거하여 예측되었다. 수용체로 가능한 폴리페놀의 구조적 특징들이 평가되었으며, 이러한 결과는 Deinococcus geothermalis 유래 아밀로수크라아제가 식품, 화장품, 및 제약산업에서 높은 잠재성을 갖는 폴리페놀 배당체의 효소적 합성에 매우 효율적인 촉매로 활용될 수 있다는 것을 보여준다.

Promoting Effect of AlCl_3 on the Fe-catalyzed Dimerization of Bicyclo[2.2.1]hepta-2,5-diene

  • Nguyen, Mai Dao;Nguyen, Ly Vinh;Lee, Je-Seung;Han, Jeong-Sik;Jeong, Byung-Hun;Cheong, Min-Serk;Kim, Hoon-Sik;Kang, Ho-Jung
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권7호
    • /
    • pp.1364-1368
    • /
    • 2008
  • The activity of the catalytic system composed of Fe$(acetylacetonate)_3$ (Fe$(acac)_3$), triphenylphosphine, and diethylaluminum chloride for the dimerization of bicyclo[2.2.1]hepta-2,5-diene (2,5-norbornadiene, NBD) to produce hexacyclic endo-endo dimer (hexacyclo[$7.2.1.0^{2,8}.1^{3,7}.1^{5,13}.0^{4,6}$]tetradec-10-ene, Hnn) was significantly enhanced by the presence of $AlCl_3$, especially at the molar ratios of NBD/Fe$(acac)_3$ of 500. XPS analysis of the catalytic systems clearly demonstrates that $AlCl_3$ facilitates the reduction of Fe$(acac)_3$ to form active species, Fe(II) and Fe(0) species. The layer separation was observed when [BMIm]Cl was used along with $AlCl_3$, but catalyst recycle was not very successful.

이온 오염에 의한 고분자전해질 연료전지의 성능저하 (Decrease of PEMFC Performance by Ion Contamination)

  • 송진훈;우명우;김세훈;안병기;임태원;박권필
    • Korean Chemical Engineering Research
    • /
    • 제50권2호
    • /
    • pp.187-190
    • /
    • 2012
  • 고분자전해질연료전지(PEMFC)에서 음극 공기에 의한 이온오염은 막전극 합체(MEA)의 성능을 심각하게 열화시킨다. 본 연구에서는 산업단지, 길가, 해변의 공기 중 이온 농도를 측정하였다. 이들 지역에서 $Na^+$, $K^+$, $Ca^{2+}$$Fe^{3+}$ 이온 농도가 비교적 높았다. 가습수로부터 이들 이온이 cathode에 유입되어 MEA 성능에 미치는 영향에 대해 연구하였다. 수돗물을 가습수로 사용해 170시간 운전한 후 MEA 성능이 초기의 11%로 감소하였다. 이들 오염 이온들이 수소이온보다 전해질 막의 슬폰산기와 친화력이 더 강해 전해질 막에 쉽게 이온 교환된 결과다. MEA 중에서 전극/막 계면에서 이온 오염이 MEA 성능저하에 미치는 영향이 제일 컸다.

기계적 롤링을 통한 수직배향 나노구조의 다용도 박막 프레임워크 변환 (Structural Formulation of As-grown Vertically Aligned Nanostructures to Multifunctional Thin-Film Frameworks through Controlled Mechanical Rolling)

  • 박태준;최석민;윤도경;이승조;박재규;이재혁;김정대;이한길;옥종걸
    • 한국생산제조학회지
    • /
    • 제25권4호
    • /
    • pp.266-270
    • /
    • 2016
  • We present a useful and practical manufacturing technique that enables the structural conversion of delicate as-grown nanostructures to more beneficial and robust thin-film frameworks through controlled mechanical rolling. Functional nanostructures such as carbon nanotubes grown through chemical vapor deposition in a vertically aligned and very loosely packed manner, and thus difficult to manipulate for subsequent uses, can be prepared in an array of thin blades by patterning the growth catalyst layer. They can then be toppled as dominos through precisely controlled mechanical rolling. The nanostructures formulated to horizontally aligned thin films are much more favorable for device applications typically based on thin-film configuration. The proposed technique may broaden the functionality and applicability of as-grown nanostructures by converting them into thin-film frameworks that are easier to handle and more durable and favorable for fabricating thin-film devices for electronics, sensors, and other applications.

축열식 촉매 산화(RCO) 반응의 성능 최적화를 위한 전산 해석 (Numerical Calculations for the Optimal Performance of Regenerative Catalytic Oxidation(RCO))

  • 정유진;이재정;정종현;김진욱;손병현
    • 한국산학기술학회논문지
    • /
    • 제12권11호
    • /
    • pp.5384-5391
    • /
    • 2011
  • 본 논문에서는 RCO 반응기의 최적 조업 조건을 도출하고자 현재 조업 중인 RTO 반응기 촉매층의 압력분포, 유속분포, 유선장, 체류시간, 온도분포 등에 대하여 분석하였고 최적의 조업 조건을 도출하기 위한 전산유체해석을 수행하였다. 전산 해석 결과, 현재 조업중인 반응기 촉매층의 축열재로 인한 압력손실은 크지 않은 것으로 나타났으며, 세라믹 필터 이후 유속은 1.8~2.7 m/s로 특별한 편류없이 비교적 안정적 유속분포를 보이고 있었다. 기류분포를 좀 더 개선하려고 한다면 설비 내부에 플래넘과 촉매층 접속 구간 연장 등의 방법을 고려할 수 있을 것으로 판단된다. 그러나 기류 안내판이나 다공판 부착 등의 방법은 큰 효과는 없을 것으로 나타났다.

500 MW 석탄화력발전소 촉매단추가에 따른 탈질설비 효율에 미치는 영향 (Effect of addition of a catalystic layer on Denitrification System efficiency in a 500 MW Coal-fired Power Plant)

  • 이상수;문승재
    • 플랜트 저널
    • /
    • 제17권1호
    • /
    • pp.58-66
    • /
    • 2021
  • 최근 미세먼지 등 대기오염물질 배출에 대한 전국민적 우려로 정부는 대기오염물질 배출규제 강화정책을 내놓고 있다. 국내 석탄화력발전소는 대기환경설비 성능개선에 박차를 가하고 있으며, 이 논문에는 500 MW급 표준석탄화력 탈질설비에 촉매단을 추가하는 성능개선사례를 다루고 있으며, 촉매단 추가 전·후 성능시험시험과 NOx제거효율에 따른 탈질설비 핵심성능 인자의 변화를 살펴보았다. 연구결과 촉매단 추가 전·후 탈질설비 효율은 80%에서 88%로 상승했고, 핵심성능인자인 미반응 암모니아, SO2/SO3 전환율은 설계보증치를 만족하였으나, 차압의 경우 설계보증치를 초과하였다. 동시에, NOx 제거효율에 따른 핵심성능인자 변화는, 미반응 암모니아 농도, 차압 항목은 NOx 제거효율이 증가에 따라 같이 증가하는 양상을 보여 관리 및 개선이 필요하다는 결과를 얻을 수 있었다.

9-Arylated Carbazole을 주리간드로 사용하는 Heteroleptic Iridium(III) 착물의 합성과 분광학적 특성 (Synthesis and Photoluminescence Properties of Heteroleptic 9-Arylated Carbazole Iridium(III) Complexes)

  • 오세환;염을균;김영훈;임영재;허정석;김영준
    • 공업화학
    • /
    • 제32권2호
    • /
    • pp.180-189
    • /
    • 2021
  • Cu(I) 촉매를 사용하여 열반응을 이용한 N-heteroaryl carbazole을 합성하였고 이를 새로운 heteroleptic Ir(III) 착물 합성을 위한 주리간드로 사용하였다. 새로운 Ir(III) 착물은 일반적인 Ir(III) 착물이 가지는 5각 고리가 아닌 6각 고리를 주리간드와 Ir 금속 결합 사이에서 형성하는 것으로 X-ray 단결정구조를 통해 확인할 수 있었다. 합성한 Ir(III) 착물들은 좋은 인광 특성을 나타내므로 OLED 발광층 재료물질로의 가능성을 보여주었다. 주리간드와 보조리간드 변화에 따른 분광학적 특성을 고찰하였는데 PL 최대 발광 파장(λmax) 변화는 보조리간드가 Ir 금속과 더 강한 결합을 만들수록 단파장 쪽으로 이동하는 것을 발견하였다. 또한, 주리간드에 대해서는 Ir-N 결합을 만드는 헤테로아릴 그룹의 아로마틱고리 전자밀도가 커질수록 단파장 쪽으로 이동하는 경향이 있는 것을 알 수 있었다.

Photocatalytic Generated Oxygen Species Properties by Fullerene Modified Two-Dimensional MoS2 and Degradation of Ammonia Under Visible Light

  • Zou, Cong-Yang;Meng, Ze-Da;Zhao, Wei;Oh, Won-Chun
    • 한국재료학회지
    • /
    • 제31권6호
    • /
    • pp.353-366
    • /
    • 2021
  • In this study, photocatalytic degradation of ammonia in petrochemical wastewater is investigated by solar light photocatalysis. Two-dimensional ultra-thin atomic layer structured MoS2 are synthesized via a simple hydrothermal method. We examine all prepared samples by means of physical techniques, such as SEM-EDX, HRTEM, FT-IR, BET, XRD, XPS, DRS and PL. And, we use fullerene modified MoS2 nanosheets to enhance the activity of photochemically generated oxygen (PGO) species. Surface area and pore volumes of the MoS2-fullerene samples significantly increase due to the existence of MoS2. And, PGO oxidation of MB, TBA and TMST, causing its concentration in aqueous solution to decrease, is confirmed by the results of PL. The generation of reactive oxygen species is detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). It is found that the photocurrent density and the PGO effect increase in the case with modified fullerene. The experimental results show that this heterogeneous catalyst has a degradation of 88.43% achieved through visible light irradiation. The product for the degradation of NH3 is identified as N2, but not NO2- or NO3-.

Spirobifluorene 그룹을 포함하는 새로운 청색 발광 재료의 전계발광 (Electroluminescence Properties of Novel Blue-Emitting Materials Based on Spirobifluorene)

  • 박선우;이하윤;권혁민;;박상신;이승은;박종욱
    • 공업화학
    • /
    • 제34권1호
    • /
    • pp.94-97
    • /
    • 2023
  • BTPSF와 BDTSF는 유기발광다이오드용 스파이로플루오렌 모이어티를 기반으로 하는 새로운 청색 발광 물질로 성공적으로 합성되었다. BTPSF와 BDTSF는 촉매를 사용하지 않고 Diels-Alder 반응을 통해 합성하여 고순도를 얻었다. 합성된 물질의 광발광 스펙트럼은 용액 상태에서 약 381, 407 nm, 필름 상태에서 각각 395, 434 nm의 최대 발광 파장을 나타내어 자외선과 짙은 청색 발광색을 나타냈다. 합성된 BDTSF 물질은 non-doped 소자의 EML로 적용되었으며, 전류 효율은 0.61 cd/A이다.