• Asia pacific journal of information systems
• /
• v.14 no.3
• /
• pp.23-55
• /
• 2004

Interests on Service Level Agreement(SLA), an immanence operating tool for managing the level of the information system service objectively and qualitatively, were raised among IT outsourcing service providers, outsourcers, and operating departments. Yet, only a few domestic conglomerates adopted the SLA, and exact usage of the SLA is currently unknown. Because of the importance of the SLA between a service recipient and a service provider, the agreement is treated with high confidentiality. This raised the problems to organizations which are considering the SLA but lack in the concrete guide line to internalize SLA management process. This study provides the process model of implementation for SLA by conducting multiple case research. The sampled companies are currently implementing the SLA over 1 year of usage period. Factors were used to provide the managerial contribution for implementing the SLA. To analyse the case samples, in-depth interview method was conducted for each sampled company. As a result, if SLA can be used as an immanence managerial tool and can be actively implemented, it will be an strategic tool for various decision making in IT management practice with long term relationship, better shared partnership, and continuous service improvement.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2015

Safety critical systems require exhaustive verification of safety properties, because even a single corner-case fault can cause a critical safety failure. However, existing verification approaches are too costly in terms of time and computational resource required, making it hard to be applied in practice. In this paper, we implemented a tool for minimizing the size of the verification target w.r.t. verification properties to check, based on program slicing technique[1]. The efficacy of program slicing using our tool is demonstrated in a case study with a verification target Trampoline[3], which is an open source automotive operating system compliant with OSEK/VDX[2]. Experiments have shown enhanced performance in verification, with a 71% reduction in the size of the code.

• Genomics & Informatics
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2005

Case-control studies are widely used for disease gene mapping using individual genotyping data. However, analyses of large samples are often impractical due to the expense of individual genotyping. The use of DNA pooling can significantly reduce the number of genotyping reactions required; hence reducing the cost of large-scale case-control association studies. Here, we discuss the design and analysis of DNA pooling genetic association studies.

• Obstetrics & gynecology science
• /
• v.61 no.6
• /
• pp.698-701
• /
• 2018

We report a rare case of vaginal amelanotic melanoma. Malignant melanomas are cutaneous and extracutaneous tumors that arise from embryological remnants of neural crest cells/melanocytes. Amelanotic melanomas at such rare locations can be misdiagnosed both clinically and radiologically. Therefore, histopathological examination and immunohistochemistry are mandatory for the diagnosis of these tumors. We diagnosed this case using histopathology and confirmed the diagnosis based on the presence of immunohistochemical markers human melanoma black 45 (HMB45) and S-100.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.35-42
• /
• 2004

This research describes that the cutting characteristics and tool wear behavior in the micro cutting of three kinds of wear resistant cemented carbides (WC-Co; V40, V50 and V60) using PCD (Poly Crystalline Diamond) and PCBN (Poly crystalline Cubic Boron Nitride) cutting tools by use of the SEM (Scanning Electron Microscope) direct observation method. The purpose of this research is to present reasonable cutting conditions from the viewpoint of high efficient cutting refer to a precise finished surface and tool wear. Summary of the results is as follows: (1) The cutting forces tend to increase as the increase of the weight percentage of WC particles, and the thrust forces was larger than the principal forces in the cutting of WC-Co. These phenomena were different from the ordinary cutting such as cutting of steel or cast iron. (2) The cutting speed hardly influenced the thrust force, because of the frictional force between the cutting tool edge and small WC particles at low cutting speed region such as 2$\mu\textrm{m}$/s. It seemed that the thrust cutting force occurred by the contact between the flank face and work material near the cutting edge. (3) The wear mechanism for PCD tools is abrasion by hard WC particles of the work materials, which leads diamond grain to be detached from the bond. (4) From the SEM direct observation in cutting the WC-Co, it seems that WC particles are broken and come into contact with the tool edge directly. This causes tool wear, resulting in severe tool damage. (5) In the orthogonal micro cutting of WC-Co, the tool wear in the flank face was formed bigger than that in the rake face on orthogonal micro cutting. And the machining surface integrity on the side of the cutting tool with a negative rake angle was better than that with a positive one, as well as burr in the case of using the cutting tool with a negative rake angle was formed very little compared to the that with a positive one.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.91-124
• /
• 2002

The use of network planning models and tools is essential for effective KII (Korea Information Infrastructure) planning and analysis in that it will significantly reduce the risk and uncertainty embeded in the development and the provision of future broadband services. The purpose of this study is to develop a theoretical framework and a computer tool for modeling the various aspects of the KII topology and architecture and evaluating the techno-economic feasibility of the KII implementation strategy.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.418-421
• /
• 2001

For insuring and guaranteeing the quality and efficiency of machine tool from design phase, we studied the reliability analysis and design review method. We researched the feasibility study machining center with the proposed procedure and described the analysis outputs. From this study will contribute to guide and introduce the reliability design in developing and producing phase of high quality product.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.93-100
• /
• 2008

In this paper, we propose the application of the Human Factors Analysis and Classification System(HFACS) to analyze an aircraft accident data. HFACS is a general human error framework originally developed and tested within the U.S military as a tool for investigating and analyzing the human causes of aviation accidents. It was examined that HFACS reliably accommodate all human causal factors associated with the commercial accidents. We found that the HFACS could be used as a reliable tool for investigating aircraft accidents including a single accident analysis.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1226-1236
• /
• 2022

Because students majoring in construction-related fields must develop a broad repository of knowledge and skills, effective transferal of these is the primary focus of most academic programs. While inculcation of this body of knowledge is certainly critical, actual construction projects are complicated ventures that involve levels of risk and uncertainty, such as resistant neighboring communities, unforeseen weather conditions, escalating material costs, labor shortages and strikes, accidents on jobsites, challenges with emerging forms of technology, etc. Learning how to develop a level of discernment about potential ways to handle such uncertainty often takes years of costly trial-and-error in the proverbial "school of hard knocks." There is therefore a need to proactively expedite the development of a sharpened intuition when making decisions. The AGC Education and Research Foundation case study committee was formed to address this need. Since its inception in 2011, 14 freely downloadable case studies have thus far been jointly developed by an academics and industry practitioners to help educators elicit varied responses from students about potential ways to respond when facing an actual project dilemma. AGC case studies are typically designed to focus on a particular concern and topics have thus far included: ethics, site logistics planning, financial management, prefabrication and modularization, safety, lean practices, preconstruction planning, subcontractor management, collaborative teamwork, sustainable construction, mobile technology, and building information modeling (BIM). This session will include an overview of the history and intent of the AGC case study program, as well as lively interactive demonstrations and discussions on how case studies can be used both by educators within a typical academic setting, as well as by industry practitioners seeking a novel tool for their in-house training programs.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.95-126
• /
• 1996

Information technology's potential for changing processes is widely acknowledged and various information technologies exist as a tool making business reengineering possible. Groupware is one of information technology that typically work in concert to bring out change in processes. This paper attempts to explain the importance of groupware as a critical information technology for business reengineering by developing a methodology of applying groupware to business reengineering. In order to understand the applicability of groupware to business reengineering, this paper has the following objectives. 1) Examines how the capability of groupware can play as a chang lever or enabler of process innovation explicitly. 2) Propose a integrated business reengineering methodology that incorporates process, process environment and information technologies specifically. A case study was used to provide the insight how groupware can play as a enabler of process innovation. The case was analyzed according to the reengineering methodology we proposed.