• 제목/요약/키워드: carrier state

검색결과 429건 처리시간 0.023초

TRIFLE DIFFERENCE APPROACH TO LOW EARTH ORBITER PRECISION ORBIT DETERMINATION

  • Kwon, Jay-Hyoun;Grejner brzezinska, Dorota-A.;Yom, Jae-Hong;Lee, Dong-Cheon
    • Journal of Astronomy and Space Sciences
    • /
    • 제20권1호
    • /
    • pp.1-10
    • /
    • 2003
  • A precise kinematic orbit determination (P-KOD) procedure for Low Earth Orbiter(LEO) using the GPS ion-free triple differenced carrier phases is presented. Because the triple differenced observables provide only relative information, the first epoch's positions of the orbit should be held fixed. Then, both forward and backward filtering was executed to mitigate the effect of biases of the first epoch's position. p-KOD utilizes the precise GPS orbits and ground stations data from International GPS Service (IGS) so that the only unknown parameters to be solved are positions of the satellite at each epoch. Currently, the 3-D accuracy off-KOD applied to CHAMP (CHAllenging Min-isatellite Payload) shows better than 35 cm compared to the published rapid scientific orbit (RSO) solution from GFZ (GeoForschungsZentrum Potsdam). The data screening for cycle slips is a particularly challenging procedure for LEO, which moves very fast in the middle of the ionospheric layer. It was found that data screening using SNR (signal to noise ratio) generates best results based on the residual analysis using RSO. It is expected that much better accuracy are achievable with refined prescreening procedure and optimized geometry of the satellites and ground stations.

보론 에미터를 이용한 n-type 결정질 실리콘 태양전지 특성

  • 김찬석;탁성주;박성은;김영도;박효민;김성탁;김현호;배수현;김동환
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2012년도 춘계학술발표대회
    • /
    • pp.99.2-99.2
    • /
    • 2012
  • 현재 양산 중인 대부분의 결정질 실리콘 태양전지는 p-type 실리콘 기판의 전면에 인 (phosphorus) 을 확산시켜 에미터로 사용한 스크린 프린티드 태양전지 (Screen Printed Solar Cells) 이다. 위 태양전지의 단점은 p-type 기판의 광열화현상 (Light Induced Degradation) 문제와 후면 알루미늄 금속 전극으로 인한 휨 현상 등이 있다. 이러한 단점을 해결하기 위해 n-type 기판의 전면에 보론 (Boron) 을 도핑하여 에미터로 사용하고, 후면 전계 (Back Surface Field) 로 인 (Phosphorus)을 도핑한 태양전지에 대한 연구가 활발히 진행 중이다. 본 연구에서는, 튜브 전기로 (tube furnace) 를 이용해 n-type 실리콘 웨이퍼 전면에 보론 도핑을 하고 이와 마찬가지로 웨이퍼 후면에 인 도핑을 실시하였다. 그리고 전면과 후면의 패시베이션을 위해 얇게 산화막을 형성한 후 실리콘 질화막 (SiNx) 을 증착하였다. 에미터와 후면 전계 그리고 패시베이션 층의 특성을 평가하기 위해 QSSPC (Quasi-Steady-State PhotoConductance) 로 소수반송자 수명 (Minority Carrier Lifetime) 과 포화 전류 (Saturation current) 값을 측정하였다.

  • PDF

바이오기술 이용 수소제조 (Biological Hydrogen Production)

  • 김미선;오유관
    • 에너지공학
    • /
    • 제15권2호
    • /
    • pp.118-126
    • /
    • 2006
  • 미생물을 이용하여 수소를 생산하는 기술은 광합성 작용에 의한 직간접 물분해, 광합성 발효, 혐기발효, 균체외 반응 등 여러 가지 기술이 있으며 본 논문에서는 이들의 적용되는 미생물과 수소생산 메커니즘을 중심으로 소개하였다. 동시에 본 기술들의 현재까지 개발된 사례를 선진국과 국내 현황을 중심으로 기술하였다. 생물학적으로 수소를 생산하는 기술은 1940년대 후반부터 실험실적인 연구가 시작되었으나, 1990년대 환경문제를 해결하기 위해서 전 세계적으로 연구가 다시 활성화되었으며, 이 글에서는 미국, 일본, 유럽연합 및 한국을 중심으로 국내외 연구현황을 소개하였다.

A Model for Analyzing the Performance of Wireless Multi-Hop Networks using a Contention-based CSMA/CA Strategy

  • Sheikh, Sajid M.;Wolhuter, Riaan;Engelbrecht, Herman A.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권5호
    • /
    • pp.2499-2522
    • /
    • 2017
  • Multi-hop networks are a low-setup-cost solution for enlarging an area of network coverage through multi-hop routing. Carrier sense multiple access with collision avoidance (CSMA/CA) is frequently used in multi-hop networks. Multi-hop networks face multiple problems, such as a rise in contention for the medium, and packet loss under heavy-load, saturated conditions, which consumes more bandwidth due to re-transmissions. The number of re-transmissions carried out in a multi-hop network plays a major role in the achievable quality of service (QoS). This paper presents a statistical, analytical model for the end-to-end delay of contention-based medium access control (MAC) strategies. These strategies schedule a packet before performing the back-off contention for both differentiated heterogeneous data and homogeneous data under saturation conditions. The analytical model is an application of Markov chain theory and queuing theory. The M/M/1 model is used to derive access queue waiting times, and an absorbing Markov chain is used to determine the expected number of re-transmissions in a multi-hop scenario. This is then used to calculate the expected end-to-end delay. The prediction by the proposed model is compared to the simulation results, and shows close correlation for the different test cases with different arrival rates.

20 GHz 고정국용 위상고정 VCDRO (Phase Locked VCDRO for the 20 GHz Point-to-point Radio Link)

  • 주한기;장동필
    • 한국전자파학회논문지
    • /
    • 제10권6호
    • /
    • pp.816-824
    • /
    • 1999
  • 본 논문에서는 아날로그 위상비교기률 이용한 위상고정루프를 소개하였으며. 이 방법을 이용하여 20 GHz 대 고정국용 위상고정 국부발진기를 설계 제작하였다. 이 국부발진기는 하이브리드 형태의 18 GHz VCDRO (Voltage Controlled Dielectric Resonator Oscillator)와 완충증폭기 및 아날로그 위상검출기로 이루어져 있다. 일반적인 크리스탈 발전기의 N배 이외의 주파수를 위상고정하기 위하여 VHF PLL로 구성되어 있다. 국부발 진기의 발진전력은 18 GHz에서 약 21 dBm. 고조파억압은 - 34 dBc로 안정된 위상고정 상태를 나타내었다. 이때의 SSB위상잡음은 -75 dBc/Hz@10 kHz로 측정되었다.

  • PDF

Li 도핑된 ZnSnO 박막 트랜지스터의 전기 및 광학적 특성에 대한 고속 중성자 조사의 영향 (Influence of Fast Neutron Irradiation on the Electrical and Optical Properties of Li Doped ZnSnO Thin Film Transistor)

  • 조인환;김찬중;전병혁
    • 한국재료학회지
    • /
    • 제30권3호
    • /
    • pp.117-122
    • /
    • 2020
  • The effects of fast neutron irradiation on the electrical and optical properties of Li (3 at%) doped ZnSnO (ZTO) thin films fabricated using a sol-gel process are investigated. From the results of Li-ZTO TFT characteristics according to change of neutron irradiation time, the saturation mobility is found to increase and threshold voltage values shift to a negative direction from 1,000 s neutron irradiation time. X-ray photoelectron spectroscopy analysis of the O 1s core level shows that the relative area of oxygen vacancies is almost unchanged with different irradiation times. From the results of band alignment, it is confirmed that, due to the increase of electron carrier concentration, the Fermi level (EF) of the sample irradiated for 1,000 s is located at the position closest to the conduction band minimum. The increase in electron concentration is considered by looking at the shallow band edge state under the conduction band edge formed by fast neutron irradiation of more than 1,000 s.

Introducing the Latest 3GPP Specifications and their Potential for Future AMI Applications

  • Koumadi, Koudjo M.;Park, Byong-seok;Myoung, Nogil
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제2권2호
    • /
    • pp.245-251
    • /
    • 2016
  • Despite the exponential throughput improvement in mobile communications systems, their ability to satisfy requirements of state-of-the-art and future applications of advanced metering infrastructure (AMI) is still under investigation. Challenges are mainly due to the inadequacy of third generation partnership project (3GPP) networks to support large amounts of devices simultaneously, while the number of AMI end-devices and the frequency of their data transmission increase with new AMI-based applications. In this introductory survey, innovative and future AMI applications and their communication requirements are first reviewed. Then, we identify challenges of 3GPP long term evolution (LTE) in enabling future AMI applications. More importantly, the latest improvements to LTE-A standard release 12 and 13 are reviewed and analyzed with regards to their potential to improve the quality of LTE-enabled AMI. It is found that 3GPP enhancements on machine type communications (MTC) standards will significantly enhance AMI communications. Beyond MTC specifications, non-MTC-specific enhancements such as carrier aggregation and multi-connectivity for user equipment will also contribute greatly to improving reliability and availability of AMI devices. The paper's focus is towards improved backhaul support for innovative and future AMI applications, beyond traditional automatic meter reading.

Autonomous Real-time Relative Navigation for Formation Flying Satellites

  • Shim, Sun-Hwa;Park, Sang-Young;Choi, Kyu-Hong
    • Journal of Astronomy and Space Sciences
    • /
    • 제26권1호
    • /
    • pp.59-74
    • /
    • 2009
  • Relative navigation system is presented using GPS measurements from a single-channel global positioning system (GPS) simulator. The objective of this study is to provide the real-time inter-satellite relative positions as well as absolute positions for two formation flying satellites in low earth orbit. To improve the navigation performance, the absolute states are estimated using ion-free GRAPHIC (group and phase ionospheric correction) pseudo-ranges and the relative states are determined using double differential carrier-phase data and singled-differential C/A code data based on the extended Kalman filter and the unscented Kalman filter. Furthermore, pseudo-relative dynamic model and modified relative measurement model are developed. This modified EKF method prevents non-linearity of the measurement model from degrading precision by applying linearization about absolute navigation solutions not about the priori estimates. The LAMBDA method also has been used to improve the relative navigation performance by fixing ambiguities to integers for precise relative navigation. The software-based simulation has been performed and the steady state accuracies of 1 m and 6 mm ($1{\sigma}$ of 3-dimensional difference errors) are achieved for the absolute and relative navigation using EKF for a short baseline leader/follower formation. In addition, the navigation performances are compared for the EKF and the UKF for 10 hours simulation, and relative position errors are mm-level for the two filters showing the similar trends.

고속 ATM 위성통신을 위한 TDMA 버스트 모뎀 설계 1부 : 수신기 동기기술 분석 (Design of a Digital Burst MODEM for High-Speed ATM Satellite Communications Part I : Analysis of Synchronization Techniques)

  • 황성현;김기윤;최형진
    • 전자공학회논문지S
    • /
    • 제35S권10호
    • /
    • pp.34-41
    • /
    • 1998
  • 본 논문에서는 155Mbps 급 ATM 고속위성 전송에 적합한 동기 요소기술을 제시하고 추적성능 개선을 위한 최적 알고리즘을 제안하였다. 이때 신호변조는 QPSK방식을 사용하였고 수신기는 버스트 모드로 동작함을 가정하였다. 이러한 점을 바탕으로 주파수동기(AFC), 위상동기(CR), 비트동기(STR)의 여러 요소기술 및 방식을 검토하고 문제점을 개선한 방안을 제시하였다. 또한 AWGN 채널 환경하에서 요구 심벌수, 정상상태 안정도, 그리고 하드웨어(H/W) 구현 난이도에 중점을 두어 제안한 각 동기 요소기술의 제반 성능평가를 수행하였다.

  • PDF

Studies on hydrophobic drug-soluble carrier coprecitates 2

  • Shin, Sang-Chul
    • Archives of Pharmacal Research
    • /
    • 제2권1호
    • /
    • pp.49-64
    • /
    • 1979
  • In an atempt to elucidate further physicochemical properties of furosemide-PVP coprecipitates, extensive investigations such as TLC, UV,IR, NMR, X-ray diffraction, TGA and DTA studies were carried out for the furosemide test systems. X-ray diffraction studies revealed that the pure furosemide and the furosemide contained within a physical mixture were crystalline in nature. However, there was no crystallinity evident in the 1:5 furosemide-PVP 40,000 coprecipitate system, even after standing for two years. The various ratio furosemide-PVP 40,000 coprecipitate systems revealed that the coprecipitate containing a greater amount of PVP 40,000 than that of furosemide showed a crystalline state of furosemide and that the minimum amounts of PVP to make amorphous form of furosemide was 1:1 ratio of furosemide to PVP. From the furosemide-PVP coprecipitate systems with PVP of different molecular weights of 10,000, 40,000 and 360,000, all the 1:1 ratio coprecipitates did not exhibit any crystallinity of furosemide, whereas all the 2:1 ratio coprecipitates showed a presence of crystalline furosemide. All the coprecipitated preparations with PEG 4,000 and with PEG 6,000 showed the diffraction peaks indicating the presence of crystalline furosemide. The comparison of infrared spectra of the physical mixture and the coprecipitate showed an interaction such as association between the functional groups of furosemide and PVP in the molecular level, whereas the studies by TLC, UV and NMR showed its dissociation in methanol solution. The weight losses in TGA curves showed all the same patterns. However, a little different transition form in DTA thermograms was shown between the physical mixture and the coprecipitate, indicating the different thermal property.

  • PDF