• Nuclear Engineering and Technology
• /
• 제28권4호
• /
• pp.349-358
• /
• 1996

The leaching behavior of uranium from unirradiated CANDU UO$_2$ fuel pellet in the spent fuel wet storage and disposal conditions has been investigated. A modified IAEA leach test method was used, and then the extent of leaching was monitored by analysis for uranium in the leachant. The leach test has been performed in various leachants(demineralized water and boric acid solution at pH=6, synthetic granite groundwater) for a long-term period of 5.4 years, and the effect of temperature on the leach rate of uranium has been analyzed. The leach rates of uranium at $25^{\circ}C$ were dependent on the leachants. Over initial 100 days of leach periods, the leach rate in groundwater was the highest in three leachants and no significant differences of leach rates ore observed in the demineralized oater and boric acid solution. But these leach rates in three leachants around 2,000 days at $25^{\circ}C$ appeared to be reached the steady rates in the range of 1~5$\times$10$^{-8}$ g/$\textrm{cm}^2$ day. The leach rate of uranium in groundwater shooed to be independent of the temperature, but those in both demineralized water and boric acid solution increased with temperature. These results show that the leaching behavior of uranium from UO$_2$ fuel in both the demineralized water ann boric acid may be controlled tv the surface oxidative.dissolution reaction of UO$_2$ and the leach rate of uranium in groundwater at room temperature could mainly be controlled by the complex reaction of dissolved uranyl ions with carbonate ions and no variation of leach rate of UO$_2$ in groundwater with temperature may be due to the local deposition of passivating uranyl phases on the surface.

• 대한화학회지
• /
• 제25권4호
• /
• pp.283-290
• /
• 1981

N,N-디메틸포름아미드용매내 반응온도 50∼$90^{\circ}C$범위에서 과량의 슈크로오스와 라우르산, 미리스트산, 팔미트산, 스테아르산 그리고 올레산등 5종의 지방산 메틸에스테르와의 에스테르 교환반응에서 반응속도를 측정하여 반응속도정수, 활성화파라미터등을 구하여 고찰하였다. 이 반응은 본 실험범위내에서 유사 1차반응으로 진행하고 반응의 순서는 주로 메틸에스테르의 지방산기의 구조변화에 의존하면 라우르산메틸, 미리스트산메틸, 팔미트산메틸 올레산메틸 그리고 스테아르산 메틸의 순으로 반응되기 힘들어지는 엔탈피조절반응이라 생각된다. 한편 이들 각각의 활성화에너지는 9.3, 9.9, 10.3, 10.9 그리고 11.1 kcal/mole이 얻어졌다.

• 한국환경과학회지
• /
• 제17권9호
• /
• pp.981-992
• /
• 2008

This study examined how to produce new methods of copper (II) sulfate crystallization by using a small-scale chemistry tool such as small-scale reaction surface and petri dish. The making of copper(II) sulfate is included in the 5th grade elementary science textbooks. Various copper(II) compounds were reacted with a 2 M sulfuric acid solution. The result of this study is as follows: Seven small amounts of copper(II) compounds were reacted with a few drops of 2 M sulfuric acid solution at room temperature to make a copper(II) sulfate crystal of triclinic shape. Using the petri dish method, a copper(II) sulfate crystal could be identified within one hour of reacting copper(II) hydroxide, copper(II) carbonate, copper(II) nitrate, copper(II) perchlorate, cupric(II) formate from a few drops of 2 M sulfuric acid solution at room temperature. When using the lap top method for copper(II) perchlorate, cupric formate, a proper crystal could be identified within one hour as well. SSC methods were used for the first time to make a copper sulfate crystal via chemical reaction. We can make a copper(II) sulfate crystal using a simple method which is easier, safer and saves time in class. And since a small quantity of chemicals are being used in SSC chemical methods, waste is greatly reduced. This lessens the amount of environmental problems caused by the experiment. This can be helpful in preserving nature. In addition the cost of chemical and laboratory equipment is greatly reduced because it uses material that we find in our daily lives. There will be continued study of small-scale methods such as improvement of new programs, study and training of teachers, and securing SSC tools. I would like to suggest such as SSC methods are applicable in elementary School Science. I would like it to become a wide spread program.

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.413-420
• /
• 2013

Effect of inherent volatile matters in fuels on electrochemical reactions of anode was investigated for a single direct carbon fuel cell (DCFC). Raw coals used as power source in the DCFC release light gases into the atmosphere under the operating temperature of DCFC ($700^{\circ}C$) by thermal decomposition and only char remained. These exhausted gases change the gas composition around anode and affect the electrochemical oxidation reaction of system. To investigate the effect of produced gases, comparative study was conducted between Indonesian sub-bituminous coal and its char obtained through thermal treatment, carbonizing. Maximum power density of raw coal ($52mW/cm^2$) was appeared higher than that of char ($37mW/cm^2$) because the gases produced from the raw coal during thermal decomposition gave additional positive results to electrochemical reaction of the system. The produced gases from coals were analyzed using TGA and FT-IR. The influence of volatile matters on anodic electrolyteelectrode interface was observed by the equivalent circuit induced from fitting of impedance spectroscopy data.

• 환경위생공학
• /
• 제4권1호
• /
• pp.17-28
• /
• 1989

Having studied the production of monoclonal antibodies for developing a diagnosis medicine which shall be detected by a high-sensitivity test by using Rhodotorula rubra as a fungi-host which had been extracted through biochemical tests and follow-up examinations on Yeast-like fungi obtained from pulmonary tissues of pulmonary tuberculosis patients who had been in Kong ju National Tuberculosis Hospital from Jun. to Dec. in 1987, I. have gained such results as follows: 1. The fusion rate was influenced by feeder cell layers, cell density and time required to the cell fusion with cells in myelona subculture. 2. The fusion rate did not show any significant difference when the cell was applyed with two molecular weights, i.e., 1500 and 4000, of polyethylene glycol. 3. Fused cells after the addition of HAT selection media were bright and round, whereas unfused myelona cells and spleen cells were shrunk and granulated. 4. The cell fusion rate turned out to be about $57.2\%$(150 wells / 264 wells). 5. $10\%$(15 wells / 150 wells) of the positive reaction was detected in monoclonal antibody screening. 6. The titer which had reacted positively to Rhodotorula rubra fungal-host was 800 times in density after the gradual dilution of the produced monoclonal antibodies with Indirect ELISA method. 7. The Strongest specific reaction came out after the peroxidase labelled anti-human Immunogobulin had been applyed to Rhodotorula rubra for activating its nature after making drift with Carbonate-bicarbonate buffer (pH 9.6) and drying completely.

• Archives of Pharmacal Research
• /
• 제27권6호
• /
• pp.662-669
• /
• 2004

The highly water-soluble monomethoxypoly(ethyleneglycol) (mPEG) prod rugs of cyciosporin A(CsA) were synthesized. These prod rugs were prepared by initially preparing intermediate in the form of carbonate at the 3'-positions of CsA with chloromethyl chloroformate, in the pres-ence of a base to provide a 3'-carbonated CsA intermediate. Reaction of the CsA intermediate with mPEG derivative in the presence of a base provides the desired water-soluble prod rugs. As a model, we chose molecular weight 5 kDa mPEG in the reaction with CsA to give water soluble prodrugs. To prove that the prod rug is decomposed in the body to produce CsA, the enzymatic hydrolysis test was conducted using human liver homogenate at $37^{\circ}C$. The prodrug was decomposed in human liver homogenate to produce the active material, CsA, and the hydrolysis half-life ($t_{1/2}$) of the prodrug, KI-306 was 2.2 minutes at $37^{\circ}C$. However, a demon-stration of non-enzymatic conversion in pH 7.4 phosphate buffer was provided by the fact that the half-life ($t_{1/2}$) is 21 hours at 37$^{\circ}C$. The hydrolysis test in rat whole blood was also conducted. The hydrolysis was seen with half-life ($t_{1/2}$) of about 9.9, 65.0, 14.2, 3.4, 2.1 9.5, and 1.6 minutes for KI-306, 309, 312, 313, 315, 316, and 317, respectively. This is the ideal for CsA prodrug. The pharmacokinetic study of the prodrug, KI-306, in comparison to the commer-cial product (Sandimmune Neoral Solution) was also carried out after single oral dose. Each rat received 7 mg／kg of CsA equivalent dose. Especially, the prodrug KI-306 exhibits higher AUC and $C_{max}$ than the conventional Neoral. The AUC and $C_{max}$ were increased nearly 1.5 fold. The kinetic value was also seen with $T_{max}$ of about 1.43 and 2.44 hours for KI-306 and Neoral, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3049-3052
• /
• 2008

MCFC(molten carbonate fuel cell) power generation system is prime candidate for the utilization of fossil based fuels to generate ultra clean power with a high efficiency. In the MCFC power plant system, a combustor performs a role to supply high temperature mixture gases for cathode and heat for reformer by using the stack off-gas of the anode which includes a high concentration of $H_2O$ and $CO_2$. Since a combustor needs to be operated in a very lean condition and to avoid excessive local heating, catalytic combustor is usually used. The catalytic combustion is accomplished by the catalytic chemical reaction between fuel and oxidizer at catalyst surface, different from conventional combustion. In this study, a mathematical model for the prediction of internal flow and catalytic combustion characteristics in the catalytic combustor adopted in the MCFC power plant system is suggested by using the numerical methods. The numerical simulation models are then implemented into the commercial CFD code. After verifying result by comparing with the experimental data and calibrated kinetic parameters of catalytic combustion reaction, a numerical simulation is performed to investigate the variation of flow and combustion characteristics by changing such various parameters as inlet configuration and inlet temperature. The result show that the catalytic combustion can be effectively improved for most of the case by using the perforated plate and subsequent stable catalytic combustion is expected.

• 콘크리트학회지
• /
• 제10권4호
• /
• pp.183-193
• /
• 1998

이 연구는 몇 가지 종류의 골재용 암석들에 대한 광물학적 및 화학적 특성을 구명하고, 이들과 물리적.역학적 특성간의 상호관계 및 콘크리트용 골재로서의적합성을 알아보기 위한 것이다. 연구대상 암석들의 광물학적.화학적 및 물리적.역학적 특성 등을 고려할 때, BJ 채석장에서 채취한 화강암과 KB, HI, SK 채석장에 채취한 호상 편마암, 홍천강변에서 채취한 규암 등은 파동소광을 보이는 석영이 다량 함유되어 광물학적으로 알칼리-실리카 반응을 일으킬 수 있는 가능성이 있기 때문에 시멘트 콘크리트용 골재로 사용하는 것보다는 다른 용도의 골재로 이용하는 것이 바람직할 것으로 생각된다. SY채석장에서 채취한 석회암의 경우에는 알칼리-탄산염 반응을 일으킬 수 있는 백운석이 많이 함유되어 있어 아스팔트 콘크리트용 골재로 이용하는 것이 타당할 것으로 판단된다. KB채석장에서 채취한 안구상 편마암과 SA 채석장에서 채취한 섬록암은 흑운모가 다량 함유되어 있어 콘크리트의 강도를 저하시킬 수 있기 때문에 콘크리트 용도로 사용하지 않는 것이 좋으나. HI 채석장에서 채취한 안구상 편마암과 홍천강변에서 채취한 편마암 등은 광물학적 및 역학적 특성 등을 고려할 때 어떠한 용도의 콘크리트용 골재로 사용하더라도 큰 문제가 없을 것으로 판단된다.

• 한국표면공학회지
• /
• 제49권4호
• /
• pp.331-338
• /
• 2016

In this work, anodic oxidation behavior of AZ31 Mg alloy was studied as a function of $Na_2CO_3$ concentration in electrolyte by voltage-time curves and observation of surface appearances and morphologies after the anodic treatments, using optical microscopy and confocal scanning laser microscopy (CSLM). The voltage-time curves of AZ31 Mg alloy surface and surface appearances after the anodic treatments showed three different regions with $Na_2CO_3$ concentration : region I, below 0.2 M $Na_2CO_3$ where shiny surface with a number of small size pits; region II, between 0.4 M and 0.6 M $Na_2CO_3$ where dark surface with relatively low number of large size burned or dark spots; region III, more than 0.8 M $Na_2CO_3$ where bright surface with or without large size dark spots were obtained. The anodically treated AZ31 Mg alloy surface became significantly brightened with increasing $Na_2CO_3$ concentration from 0.5 M to 0.8 M which was attribute to the formation of denser and smoother surface films. Pits and porous protruding reaction products were found at relatively large size and small size spots, respectively, on the AZ31 Mg alloy surface in low concentration of $Na_2CO_3$ less than 0.2 M. The formation of pits is attributed to the result of repetition of the formation and detachment of porous anodic reaction products. Based on the experimental results obtained in this work, it is concluded that more uniform, denser and smoother surface of AZ31 Mg alloy could be obtained at more than 0.8 M $Na_2CO_3$ concentration if there is no other oxide forming agent.

• 한국지반신소재학회논문집
• /
• 제22권2호
• /
• pp.13-21
• /
• 2023

최근 지구온난화 등으로 인하여 지구의 평균해수면이 상승하는 추세이다. 삼면이 바다인 국내의 경우 연안침식이 초래되어 국토 손실 및 연안의 위험성을 높일 가능성이 있다. 미생물에 의한 탄산칼슘 형성(MICP) 기술은 미생물에 의한 탄산칼슘침강 기술이며, 지반의 강성과 강도를 증진시키는 친환경적 방법이다. 본 연구에서는 연안 침식 저감을 위하여 MICP 기술을 제안하였다. 연안 조건을 고려하여 용매로 해수를 사용하고 탈염수와 그 성능을 비교하였다. 탈염수와 해수 조건하에서 미생물에 의한 요소분해능을 조사하였다. 소일칼럼을 제작하여 MICP 처리된 모래의 강도 평가를 실시하였다. MICP 처리는 표면살포법에 의해 처리되었는데, 이러한 방식은 기존의 혼합 방식과 달라 전통적인 강도 평가 방식은 적절하지 않음을 확인하였다. 미세 구조 분석을 통해 다른 용매가 사용된 경우의 광물적 변화를 관측하였다. 실험 결과, 해수는 미생물에 의한 요소분해 반응을 느리게 만드는 것을 확인하였다. 표면 경화된 모래는 침관입시험을 통해 효과적으로 평가할 수 있었다. 이 연구에서는 해수를 용매로 사용하여도 탈염수 수준으로 충분히 MICP 기술 적용이 가능함을 확인하였다.