• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.216-216
• /
• 2002

• Corrosion Science and Technology
• /
• v.5 no.4
• /
• pp.129-136
• /
• 2006

High temperature corrosion behavior of AISI-type 316L stainless steel for the MCFC(molten carbonate fuel cell) bipolar application was studied by immersion test and penetration attack method in anode environment ($650^{\circ}C$, $Li_2CO_3/K_2CO_3=62/38$ mol%, $H_2/CO_2=80/20$ vol%) without or with different $CaCO_3$ content. Not only immersion test method but also morphological observation of samples in the carbonate melts are adopted as experimental methods. With aid of the morphological observation of cross section of samples immersed in a carbonate melt was possible to obtain penetration attack. The concentration effect of $CaCO_3$ inhibitor was investigated in order to verify the optimum concentration for practical application in MCFC stack operation. The corrosion rate in the presence of $CaCO_3$ was proven to be decreased as a function of $CaCO_3$ concentration. The corrosion rate in the presence of $CaCO_3$ was measured with a value of 6.9 mpy which is 2.4 times lower than that of inhibitor-free electrolyte. The cross section microscopy revealed that the internal penetration by oxidation in molten carbonate is very severe. In this case, the attack was occurred not only dissolution loss in the electrolyte by corrosion reaction but also weight gain through oxide layer by internal penetration.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.597-606
• /
• 2015

This work investigates the carbonation of KOH-dissolved methanol and ethanol solution systems carried out for $CO_2$ fixation. Potassium methyl carbonate (PMC) and potassium ethyl carbonate (PEC) were synthesized during the reaction in each solution as the solid powder, and they were characterized in detail. The amount of $CO_2$ chemically absorbed to produce the PMC and PEC precipitates were calculated to be 97.90% and 99.58% of their theoretical values, respectively. In addition, a substantial amount of $CO_2$ was physically absorbed in the solution during the carbonation. PMC precipitates were consisted of the pure PMC and $KHCO_3$ with the weight ratio of 5:5, respectively. PEC precipitates were also mixture of the pure PEC and $KHCO_3$ with the weight ratio of 8:2, respectively. When these two precipitates were dissolved in excess water, methanol and ethanol were regenerated remaining solid $KHCO_3$ in the solutions. Therefore, the process has the potential to be one of the efficient options of CCS and CCU technologies.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.63-70
• /
• 2023

Ultrasound-assisted dissolution of U₃O₈ powder in carbonate solution was explored to determine if and how ultrasound act during the dissolution. The variation of U₃O₈ solid particles and uranyl complexes under ultrasound treatment and magnetic stirring was observed in carbonate media. The results show that the use of ultrasound can increase the solubility and dissolution rate of U₃O₈ powder than that under magnetic stirring. The crush of U₃O₈ particles and the reduction of the activation energy (Ea, kJ/mol) of U₃O₈ dissolution reaction were observed, which both play an important role in the ultrasonic-assisted dissolution of U₃O₈ in carbonate-peroxide solution. Meanwhile, there is no observation of the ultrasound effect on the distribution of uranyl species and hydrolysis of uranyl complexes during the ultrasound treatment in carbonate-peroxide solution. Although the generation of ·OH radicals under ultrasound (22 ± 2 kHz) was observed, the oxidation of ·OH had little effect on the dissolution of U₃O₈ in the carbonate-peroxide solution system.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1551-1555
• /
• 2012

Second-order rate constants ($k_N$) have been measured spectrophotometrically for the reactions of benzyl 2-pyridyl carbonate $\mathbf{7}$ and $t$-butyl 2-pyridyl carbonate $\mathbf{8}$ with a series of alicyclic secondary amines in $H_2O$ at $25.0^{\circ}C$. Substrate $\mathbf{8}$ is less reactive than $\mathbf{7}$. Steric hindrance exerted by the bulky $t$-Bu group of $\mathbf{8}$ has been suggested to be responsible for the decreased reactivity. The Br${\o}$nsted-type plots for the reactions of $\mathbf{7}$ and $\mathbf{8}$ are linear with ${\beta}_{nuc}=0.49$ and 0.44, respectively, which is typical for reactions reported previously to proceed through a concerted mechanism. Aminolyses of $\mathbf{7}$ and $\mathbf{8}$ were expected to proceed through a zwitterionic tetrahedral intermediate $T^{\pm}$, which would be stabilized through an intramolecular H-bonding interaction. However, the kinetic results suggest that the reactions proceed through a concerted mechanism. The H-bonding interaction in $T^{\pm}$ has been suggested to accelerate the rate of leaving-group expulsion from $T^{\pm}$. Another factor that might accelerate expulsion of the leaving group is the "push" provided by the RO group in $T^{\pm}$ through resonance interactions. Thus, it has been concluded that the enhanced nucleofugality through the H-bonding interaction and the "push" provided by the RO group forces the reactions to proceed through a concerted mechanism.

• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.685-691
• /
• 1992

The $d^8$-transition metal complexes containing diphosphine, $MCl_2PP$ were prepared by using $K_nMCl_m$ as starting materials, wherein M were Ni(II), Pd(II), Pt(II) and Au(III) and PP were bis(diphenylphosphino)methane(dppm), bis(diphenylphosphino)ethane(dppe), bis(diphenylphosphino)propane (dppp) and bis(diphenylphosphino)ethylene(dppety). The complexes were characterized by the spectral property $(^H-NMR$, $^{31}P-NMR$ and UV-Visible spectra) together with elemental analysis. The complexes were tested for the catalytic activity on the formation reactions of 3(2H)-furanone and cyclic carbonate. The only Ni(II)- and Pd(II)-diphosphine complexes displayed a good catalytic effects in the production of 3(2H)-furanone from 2-methyl-3-butyn-2-ol [reaction (1)]. But all the diphosphine complexes as catalyst were almost inactive towards cyclic carbonate production preaction [reaction (2)].

• Journal of Microbiology and Biotechnology
• /
• v.31 no.9
• /
• pp.1311-1322
• /
• 2021

Microbially induced calcium carbonate precipitation (MICP) has recently become an intelligent and environmentally friendly method for repairing cracks in concrete. To improve on this ability of microbial materials concrete repair, we applied random mutagenesis and optimization of mineralization conditions to improve the quantity and crystal form of microbially precipitated calcium carbonate. Sporosarcina pasteurii ATCC 11859 was used as the starting strain to obtain the mutant with high urease activity by atmospheric and room temperature plasma (ARTP) mutagenesis. Next, we investigated the optimal biomineralization conditions and precipitation crystal form using Plackett-Burman experimental design and response surface methodology (RSM). Biomineralization with 0.73 mol/l calcium chloride, 45 g/l urea, reaction temperature of 45℃, and reaction time of 22 h, significantly increased the amount of precipitated calcium carbonate, which was deposited in the form of calcite crystals. Finally, the repair of concrete using the optimized biomineralization process was evaluated. A comparison of water absorption and adhesion of concrete specimens before and after repairs showed that concrete cracks and surface defects could be efficiently repaired. This study provides a new method to engineer biocementing material for concrete repair.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.808-811
• /
• 2011

A new catalytic system has been developed in the synthesis of 2-amino-5-nitro-4,6-diarylcyclohex-1-ene-1,3,3-tricarbonitriles using carbonate on polymer support (Amberlyst A-26 $NaCO_3{^-}$). Short reaction time, simplicity of isolation, safe catalyst and high yields of product are the features.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.4
• /
• pp.415-425
• /
• 2003

A single particle analysis, called low-Z electron probe X-ray microanalysis was applied to characterize the atmospheric aerosols collected during Asian Dust storm events in the year of 2000 and 2001. Most frequently encountered chemical species were the soil-originated species such as aluminosilicates, silicon dioxide, and calcium carbonate. Also various species such as carbon -rich, organics, sea salts, and some reacted calcium carbonate were identified. The observation of internally mixed particles oi calcium carbonate, calcium nitrate and/or calcium sulfate shows the occurrence of the heterogeneous reaction between Asian Dust particles and NO$_{x}$ and/or SO$_{x}$ species in the atmosphere.ere.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.97-101
• /
• 1991

Gas-phase pyrolyses of carbonate esters, ${\alpha}$- and ${\beta}$-hydroxy esters and ${\beta}$-hydroxy ketones have been studied theoretically by the AM1 MO method. Carbonate esters were found to decompose by two types of processes; in the reaction pathway involving an intermediate, the decomposition of the intermediate was rate-limiting, but direct pyrolyses were also possible via a six-membered cyclic transition state in which the methoxy oxygen attacks a hydrogen atom on the ${\beta}$-carbon. The hydroxy esters and ketones were found to decompose in a concerted process involving a six-membered cyclic transition state. Successive methylation on the ${\alpha}$- and ${\gamma}$-carbon led to an increase in the reactivity in agreement with experiments.