• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.791-801
• /
• 2010

Forest soil carbon model is a useful tool for understanding complex soil carbon cycle in forests and estimating dynamics of soil carbon to climate change. However, studies on development and application of the model are insufficient in Korea. The need for development of Korean model is now growing, because there are notable problems and limitations for adapting overseas models in Korea to meet the requirements of the international organizations such as IPCC, which demands highly reliable data for national reports. Therefore, we have studied 7 overseas forest soil carbon models (CBM-CFS3, CENTURY, Forest-DNDC, ROMUL, RothC, Sim-CYCLE, YASSO), analyzed and compared their structure, decomposition mechanism, initializing process and, input and output data. Then we evaluated applicability of these models in Korea with three criteria; availability of input data, performance of model, and possibility of regional modification. Finally, a systematic process for applying a new model was suggested based on these analyses.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.264-269
• /
• 2014

The aim of this study was to determine the current distribution area of Robinia pseudoacacia habitat and to estimate its stand yield as well as its carbon stocks. In order to do so, the area of R. pseudoacacia distribution is obtained based on the large-scaled forest type map (1:5,000). Also, Weibull diameter distribution model is used to predict the yield of R. pseudoacacia stands. In addition, carbon emission factor is applied to calculate carbon stocks and removals. To obtain the stand yield of R. pseudoacacia, we developed estimation equation considering growth factors of the stand, e.g. mean diameter, the basal area, maximum and minimun diameter and etc. and tested it to ensure accuracy. Consequently, estimation equation derived from all growth factors have shown significance that could also be used for analysis. Site index was also established to determine the productivity of the forestland that later turned out to be ranging from 16 to 22. Based on these results, stand yield tables were drawn up. R. pseudoacacia is widely distributed in inland areas of Gyeongsang, Chungcheong and Gyeonggi provinces which covers total area of 26,770 ha. And when it is converted into carbon stocks, it amounts to 2,517,598tC with annual carbon uptake of 3.76tC/ha which is comparable to Querqus species that is known to storer large amounts of carbon. Therefore, R. pseudoacacia is also expected to serve as a viable carbon pool that would contribute to the mitigation of climate change. Furthermore, stand yield tables, an outcome of this survey would assist not only in proper management but also in sustainable management policy of R. pseudoacacia.

• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.188-194
• /
• 2023

This study aimed to derive the basic wood density, one of several carbon emission factors, for carbon accounting of bamboo forests in Korea. Bamboo is mainly distributed in Jeollanam-do and Gyeongsangnam-do provinces, and 101 sample trees were selected for each of the three species (Phyllostachys nigra var. henonis, P. bambusoides, and P. pubescens). The basic wood density derivation used the KS F 2098 method. The measurements showed that the basic wood density was 0.83 g/cm³ for P. nigra var. henonis, 0.81 g/cm³ for P. bambusoides, and 0.72 g/cm³ for P. pubescens. However, the bamboo distribution area in Korea is not very large, and P. pubescens grows in one area only. Therefore, the basic wood density that can be applied to bamboo was 0.79 g/cm³. Evaluation of the uncertainty of the extracted basic wood density showed a very low value of 1.61%, which confirmed the reliability of the basic wood density derived from this analysis. The basic wood density, biomass expansion factor, and root-to-shoot ratio were used to calculate the carbon storage capacity of one bamboo plant and expanded to calculate the capacity for a hectare of bamboo. Carbon storage and absorption of bamboo were calculated by applying a carbon-emission factor, such as the basic wood density. These study results are expected to contribute to the carbon-neutral policy and forest management direction in Korea.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.182-188
• /
• 2012

In this study we analyzed carbon emissions of leaves of a Pinus densiflora which is vulnerable to a forest fire using the cone calorimeter in order to analyze greenhouse gas emissions from forest fires depending on region and altitude. Fuels were collected from 9 regions[Hongcheon(Gangwon-do), Chungsong(Gyeongbuk-do), Yanhpyeong (Gyeonggi-do), Jecheon(Chungchongbuk-do), Gongju(Chungcheongnam-do), Wuju(Jeollabuk-do), Youngam(Jeollanam-do), Busan and Jeju-do)] and 9 altitudes(80 m, 450 m, 900 m, 1000 m, 1100 m, 1200 m, 1300 m, 1400 m and 1500 m) and then, carbon dioxide and carbon monoxide emissions contained in a weight of 50 g of fuel were analyzed. According to the results, there were differences in carbon emissions by regional groups, as the average carbon dioxide and carbon monoxide emissions in 9 regions were nearly 43.5929 g to 52.8868 g, and 0.8842 g to 3.6422 g, respectively. Busan and Jecheon had relatively higher carbon dioxide emissions and especially, Busan had 1.23 times higher carbon dioxide emissions than Jeju-do. Also, Gongju, Chungcheongnamo Province and Busan had relatively higher carbon monoxide emissions and especially, Gongju and Pusan had relatively higher carbon monoxide emissions and especially, Gongju had 4.12 higher carbon monoxide emissions than Hongcheon. In addition, there were differences in carbon emissions too depending on altitude, since carbon dioxide and carbon monoxide emissions in 9 altitudes were respectively, 40.7015 g to 68.9297 g and 1.3923 g to 12.2918 g. At the altitude of 80m, carbon dioxide and carbon monoxide emissions were respectively, 68.9297 g and 12.2918 g, and at the altitude of 450m, carbon dioxide and carbon monoxide emissions were respectively, 65.5115 g and 11.2497 g. These results show that pine trees at the lower altitude discharge relatively more carbon. It is considered that this analysis on carbon emissions depending on region and altitude can be effectively used for predicting greenhouse gas emissions and establishing statistical data from forest fires in each region and altitude.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.242-248
• /
• 2001

Changes in land-use can affect soil organic matter content and fertility. We compared total soil carbon and nitrogen concentrations, soil respiration, and nitrogen availability under three land-use types in central Korea; conversion of old rice field to natural willow-maple (Salix-Acer) forest, conversion of old field to artificial Korean pine (Pines koraiensis) forest, and indigenous oak (Quercus spp.) forest. After 20 years of fallow the area of rice field conversion to forest had higher soil carbon and nitrogen concentrations in the soil depth of 0-10cm and 10-20cm than the areas of field conversion to Korean pine forest and indigenous forest. In general, soil carbon and nitrogen concentrations decreased with soil depth. Organic matter accumulation as a balance of input and decomposition seemed to be higher in the soil of previous rice field, and carbon and nitrogen accumulation was largely confined to the topsoil. Soil respiration rates were greatest at the area of rice field conversion to forest, and appeared to be related to soil carbon and soil moisture. Soil nitrogen availability measured by the ion exchange resin bag method differed significantly among land-use types; soil inorganic nitrogen ($NH_4{^+}+NO_3{^-}$) and ammonium availability were highest in the soil under indigenous oak forest followed by conversion of old field to artificial Korean pine forest and conversion of old field to natural willow-maple forest.

• The Journal of Fisheries Business Administration
• /
• v.42 no.1
• /
• pp.37-55
• /
• 2011

This study is to examine the economic effects of seaweed forest creation project in the case of Jeju Woodo Seokwang－ri. Seaweed forest creation project will raise up the quality and quantity of coastal fisheries resource and improve the structure of coastal ecosystem as a project the recovery of coastal fisheries resource against barren ground like whitening event. The economic effect by seaweed forest creation project can be found not only in the income increase of fishermen but also in reduction of carbon dioxide. The results of this study are summarized as follows: First, the income increase effect of fishermen has economic value of 26,945 thousand won under a 30-year cash flow based on a 8.5% discount rate. This suggests that the seaweed forest creation project increases income of fishermen. Second, the reduction effect of carbon dioxide has economic value of 1,083 thousand won per year. This indicates that the seaweed forest creation project reduces carbon dioxide. In conclusion, the results of this study suggest the seaweed forest creation project has economic value in the case of Jeju Woodo Seokwang-ri.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.406-414
• /
• 2016

The lignin-based carbon nanofiber reinforced epoxy composite has been prepared by immersing carbon nanofiber mat in epoxy resin solution in order to evaluate the physical and mechanical properties. The thermal and mechanical properties of the carbon nanofiber reinforced epoxy composite were analyzed using thermogravimetric analysis (TGA), differential scanning calorimeter (DSC) and tensile tester. It was found that the thermal properties of the carbon nanofiber reinforced epoxy composite improved, with its glass-transition temperature ($T_g$) increased from $90.7^{\circ}C$ ($T_g$ of epoxy resin itself) to $106.9^{\circ}C$. The tensile strengths of carbon nanofiber mats made from both lignin-g-PAN copolymer and PAN were 7.2 MPa and 9.4 MPa, respectively. The resulting tensile strength of lignin-based carbon nanofiber reinforced epoxy composite became 43.0 MPa, the six times higher than that of lignin-based carbon nanofiber mats. The carbon nanofibers were pulled out after the tensile test of the carbon nanofiber reinforced epoxy composite due to high tensile strength (478.8 MPa) of an individual carbon nanofiber itself as well as low interfacial adhesion between fibers and matrices, confirmed by the SEM analysis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.1
• /
• pp.1-7
• /
• 2013

This study was to examine growth, carbon and nitrogen responses in foliage following forest fertilization in a red pine stand. Two types of fertilizer (N:P:K=113:150:37 kg $ha^{-1}$; P:K=150:37 kg $ha^{-1}$) were applied on late April 2011. Growth, carbon and nitrogen responses of foliage were monitored 3 times (July, September, November) after fertilization. Morphological growth responses (dry mass, leaf area, specific leaf area) with foliage age were not significantly (P > 0.05) affected by fertilizer application, while needle dry mass and leaf area of July were significantly lower in current-year-old than in one-year-old or two-year-old needles of September or November. Carbon concentration and content in foliage was little affected by fertilizer application compared with sampling month or needle age, while the NPK fertilizer produced high nitrogen concentration and content of foliage. The results indicate that nitrogen concentration and content in foliage may serve as an indicator of the nitrogen status by fertilization in a red pine stand.

• Journal of Environmental Science International
• /
• v.32 no.9
• /
• pp.647-657
• /
• 2023

The study analyzes the forest status of each local government for Korean forests and believes that it can be used as basic data for setting the direction pursued by each local government. The study took into account the fact that the forest rate in Korea was 63.5%, because it was judged that the higher the proportion of forest area, the more important it was to use the characteristics of forests. The characteristics of forests were analyzed based on four factors in 12 factors to identify the location of the ground body by dividing seven types. In addition, basic information on carbon absorption sources was provided by grasping the ability of carbon absorption sources per year through the amount of forest resources to be analyzed. In addition, as a result of analyzing the characteristics of the weather for the promotion of carbon absorption sources, the flat area on the side of Gangneung Mountain was a warm forest with a warm index of 106.0.

• Journal of Ecology and Environment
• /
• v.30 no.1
• /
• pp.17-21
• /
• 2007

The organic carbon (OC) distribution of Pinus densiflora forest in Songgye valley at Mt. Worak National Park were studied as a part of the National Long-Term Ecological Research in Korea. In order to investigate the OC distribution, OC in plant biomass, litterfall, litter layer on forest floor, and soil were estimated. The density of P. densiflora forest was 1,300 trees/ha, average DBH was $15.2{\pm}6.17\;cm$ and average tree height was $10.7{\pm}2.56\;m$. The shrub layer was dominated by shrubby Quercus variabilis, Fraxinus sieboldiana and lndigofera kirilowii with low frequency, and herb layer was dominated by Pteridium aquilinum and Miscanthus sinensis. Total amount of OC stored in this pine forest was 142.78 ton C/ha. Organic carbon stored in soil and plant biomass accounted for 59.2% and 37.8%, respectively. Amount of OC distributed in trees, shrubs, herbs and litter layer in this pine forest was 51.79, 2.03, 0.12 and 4.29 ton C/ha, respectively. Amount of OC returned to forest floor via litterfall was $1.50\;ton\;C\;ha^{-1}\;yr^{-1}$. Soil organic carbon (SOC) decreased along the soil depth. Total amount of SOC within 50cm soil depth was $84.55\;ton\;C\;ha^{-1}\;50\;cm-depth^{-1}$.