• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.16-21
• /
• 2012

The growth in IT industry has brought a corresponding rise in the number of connected digital devices in the distribution network. These digital loads lead to AC to DC conversion losses in order to supply power to them. The more the renewable energies and plug-in electrical vehicles penetrated our lives, the more the electrical losses are caused by AC to DC conversion process. Hence, this paper suggests the methodology for evaluating the amount of power supplied according to the ratio of DC power supply and performs an economic analysis of DC distribution system considering grid parity. In here, the cost of carbon emission reduced by renewable energy is also concerned.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.673-684
• /
• 2012

Quantitative understanding of total carbon, total inorganic carbon and total organic carbon contained in ocean sediments is a basic data for interpretation of oceanic sediment environments. Elemental analyzer(EA) is frequently used for the analysis of carbon contents in inland soils and ocean sediments. Carbon and nitrogen contents of the soil reference material analyzed by an EA were 2.30% and 0.21% with standard deviations of 0.02 and 0.01, respectively. Relative standard deviations were 0.01 and 0.06, respectively, representing a high precision. Regression analysis of TOC and TC analysis results for the samples with TOC of less than 2.0% for the site in Hyung-Do showed a linear relationship with a slope of 0.9743($R^2$=0.9989, n=38), and the results of a relationship regression analysis between total organic carbon contents less than 0.5% and average grain size except for two samples showed a linear relationship with a slope of 0.0444($R^2$=0.6937 n=36). TOC contents of surface sediments were in the ranges of 0.10~1.67%(Average $0.26{\pm}0.37%$) with TOC values of 1.67% at S02 sampling site, 1.13% at S07 sampling site, and less than 1.00% at remaining sites. In the case of PC 01 core sediments, TOC showed the highest value of 0.20% near 70 cm. In the case of PC 02 core sediments, the highest value of 0.24% was indicated near 60 cm. The analysis method of organic carbon obtained from Hyung-Do Intertidal zone sediment sample results may be considered applicable to an organic carbon analysis for ocean sediments and useful for organic carbon analysis experiments of ocean sediments with a reduction in time required for the analysis and a high precision coupled with a high accuracy.

• Korean System Dynamics Review
• /
• v.8 no.2
• /
• pp.115-140
• /
• 2007

Changes in material use, energy use and emissions profiles of steel industry are the result of complex interrelationships among a multitude of technological and economic drivers. To better understand and guide such changes requires that attention is paid to the time-varying consequences that technology and economic influences have on an industry's choice of inputs and its associated outputs. We briefly review the range of policy issues in our paper and assess the impact that climate-change policies may have on energy use and carbon emissions in Korea steel industry. We then present the models of Korea steel industry's energy and product flow regarding environmental regulations by using system dynamics simulation methodology(SD). Time series data and engineering information are combined to endogenously specify changes in technologies, fuel mix, and production processes within dynamic simulation model. Through a various scenario, ramifications that the convention of climate change would to steel industry is analyzed, and based on the study results, strategies against environment changes is contemplated in various perspectives to contribute to minimize the risks concerning the uncertain future and to be conducive to Korea steel industry's sustainable development.

• Economic and Environmental Geology
• /
• v.19 no.spc
• /
• pp.163-173
• /
• 1986

Black and graphite slates from the Okcheon metamorphic belt contain enriched values of uranium (average 200~250ppm) and molybdenum (average 150~200ppm). Uranium mineralization is closely associated with quartz and sulfide veinlets which are formed diagenetically in graphite slate. The uranium minerals were concentrated in outer part of graphite nodules. The ${\delta}^{13}C$ values of organic carbon from the metasediments including uranium bearing graphite slate range from -15.2 to -26.1‰ with a mean of -23.5‰. Meanwhile, ${\delta}^{13}C$ values of coal and coaly shale from some Paleozoic coal fields of South Korea vary from -19.4 to -23.9‰ with an average of -22.5‰. Isotopic compositions of vein calcite in uranium bearing slate range from -13.4 to -15.4‰ in ${\delta}^{13}C$ and +11.3 to +15.1‰ in ${\delta}^{18}O$ could indicate a reduced organic carbon source isotopically exchanged with a graphite of biogenic origin. Metamorphic temperature determined by a calcite-graphite isotope geothermometer was 383~$433^{\circ}C$ which corresponded to greenschist facies by Miyashiro (1973) and is consistent with metamorphic facies estimated by mineral assemblages (Lee, et al., 1981, and Kim, 1971). The fixation of uranyl species by carbonaceous matter in marine epicontinental environment, and remobilization of organouranium by diagenetic processes have attributed to the enrichment of uranium and heavy metals in the graphite slate of Okcheon metamorphic belt.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.257-262
• /
• 1999

The economic loss arisen from the abrasion wear have been increasing at every industrial field. To reduce the economic loss we developed a new process, which is named MAHa process(Metallic Adhesives for HArdening). MAHa process is a process to weld tungsten carbide(WC) to the surface of a plain carbon steel so that it may stay longer under the severe abrasive environment. The depth of the WC layer ranges from 0.5 mm to 5 m. Compared with the conventional technology, arc-augmented welding which bonds WC on the flat surface only, MAHa process has the merits that it can make a robust WC layer on the round or wave- shaped surface also. How to turn the WC powder into a flexible mat is the key technology of the MAHa process. We invented new polymer materials to accomplish such a goal and both the MAHa process and the invented materials were applied for patents. For the application, the inner wall of elbow of Concrete Pump Truck(CPT) was maharized(MAHa process-treated) and the new WC layer on the inner wall was made successfully. The elbow was equipped to a CPT.

• Economic and Environmental Geology
• /
• v.33 no.3
• /
• pp.205-215
• /
• 2000

The Anyang River runs through highly industrialized area and joins the lower part of the Han River. loading out large amounts of potential pollutants. Attempts were made to understand geochemical behavior of trace elements in the stream sedimens collected from the bottom of the river and the stream water. Bottom sediments, suspended solids and stream waters were collected and analysed for the chemical and mineralogical composition. Heavy metals including Cr, Zn, Ni, and Co in the sediments were enriched appeared to reflect anthropogenic input. Pb, Cu, As were also enriched between several to 10 times , compared to background levels. Although some heavy metals were derived from anthropogeic input, geochemical associations seem to implyh much of the elements are originated from natural sources as well, mainly from granitic rocks . This is also supported by the mineralogical composition of the suspended solids, which are mainly composed of quartz, feldspar and mica. Most of the elements are associated with total carbon and clay sized fractions, with high values of correlation coefficient. Most of the elements are associated with total carbon and clay sized fractions , with high values of correlation coefficient. It was noteworthy that Hg was detected between 2 and 4 ppb in the stream water.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.44-51
• /
• 2021

PIP is an abbreviation of 'Performance Improvement Package', which is a package that can improve performance by applying some design changes to existing aircraft. Boeing provides PIP applicable to B777-200, and Airbus provides PIP applicable to A350-900 as standard. PIP provided by Boeing and Airbus is a separate task, but it is expected to reduce fuel consumption by reducing drag through aerodynamic improvements. The PIP applied to the A350-900 includes work such as increasing Winglet Height and re-twisting Outboard Wing. This study is to verify the effect of PIP application of the A350-900 aircraft and use it as basic data for economic analysis. The aerodynamic improvement studies and expected effects of the PIP application were examined, and the actual flight data of the PIP-applied and the non-applied aircraft were compared to confirm the PIP application effect. This paper provides empirical results for the aviation industry on the PIP application efficiency as a method of improving fuel efficiency and reducing carbon emission.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.173-182
• /
• 2024

While the current share of marine energy in South Korea is less than 1%, it is globally recognized as a resource approximately four times the annual electricity production. Considering the diverse geographical features of the East Sea, South Sea, and West Sea, marine energy development is crucial for South Korea and essential for achieving the 2050 carbon neutrality goal. Policy efforts for marine energy deployment focus on establishing an innovative, open, and integrated R&D system to respond flexibly. The construction of a scientific, economic, and social valid site selection system, along with a maritime spatial planning regime that considers environmental and socio-economic impacts, is emphasized. To expedite the early activation of marine energy, comprehensive policy endeavors, including discriminatory support policies and participation in international standardization, are anticipated to contribute to the sustainable development and dissemination of marine energy. Marine renewable energy plays a significant role in sustainability and addressing climate change, considered an essential component of South Korea's efforts toward carbon neutrality.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.617-625
• /
• 2012

This study examines the current status and policy development of Carbon Dioxide Capture and Storage(CCS), which is a technology to mitigate climate change, in Korea and foreign countries. It also analyzes IEA CCS regulatory framework as a guideline and provides limitations and implications for marine geological storage in the Republic of Korea. Although CCS master plan is established at national level, related laws are not amended and detailed polices are not yet provided. Established 'Intergovernmental CCS committee' lacks its cooperative mechanism and flexibility. Only limited and segmented economic analyses are performed and funding for large scale of CCS project is not secured. In addition, information sharing is limited and public awareness activities are insufficient. Therefore, this paper provides some policy suggestions on establishing a legal framework based on the 'Marine Environmental Management Act', strengthening the role of intergovernmental CCS committee, conducting CCS economic analysis based on various scenarios, providing economic incentives and public participation strategies, and establishing a specialized agency for information sharing.

• Korean Journal of Microbiology
• /
• v.37 no.1
• /
• pp.92-99
• /
• 2001

High-cell-density cultivation of Ralstonia eutopha KHB 8862 by fed-batch fermentation in a 200 l pilot plant was carried out for the mass production of poly(3-hydroxybutyrate) (PHB). After 80 h of cultivation, the dry cell weight (DCW), PHB concentration, and PHB yield from fructose syrup reached 168 g/l, 74%DCW, and 0.27 (w/w), respectively, resulting in a productivity of 1.6 g of PHB/L/h. Based on these results, the PHB production cost from bacterial fermentation was analyzed and economic evaluation was performed. In the case of new investment being implemented or not, the production cost of PHB was US$ 3.15/kg and US$ 2.41/kg, respectively. PHB productivity and PHB yield on a carbon substrate were both important factors to be optimized. The increase of PHB yield on a carbon sources significantly decreased the PHB production cost but the increase in productivity had a relatively slight effect on the decrease in PHB production cost because the cost of carbon sources (37%) for PHB was larger in proportion to total cost than the depreciation cost (17%). These results suggest that the increased PHB yield from carbon sources and the development of new cheaper substrates would be more effective in decreasing PHB production cost than the increase in productivity. It was demonstrated that PHB is not in competition with consumable plastics such as PET in present market. Therefore, it is essential to lower production cost to be used as a bulk product and desirable to develop new application fields for PHB such as biomedical and cosmeceuticals.