• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.479-484
• /
• 2003

In the case of the feeder bus route choice, it is more desirable to choose the route by treating as a single route linked from origin to destination than the whole network. This study is to establish a concept that frames the feeder bus route choice technique for the change of the existing single bus route or the creation of the new feeder bus route. The concept of the feeder bus route choice technique in this study is not to frame the whole bus network but to frame a single route to a unit O-D pair. So, this study has the assumption that does not consider the waiting and transfer time at the bus stop. This system technique consists of the following phases: I) limitation of the road network examined for the study, ii) enumeration of the appropriate candidate routes by the permissive route length, and iii) determination of the optimum bus route by the route evaluation value.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.62-73
• /
• 2010

In this paper we proposed a candidate algorithm on G.711.1 and G.722 superwideband extension codec which is under standardization by ITU-T. The proposed codec not only provides an interoperable bitstream with ITU-T G.711.1 and G.722, but also encodes a superwideband signal with a bandwidth of 50-14,000 Hz using superwideband extension layer. The candidate codec consists of a core layer to provide an interoperability with conventional wideband codecs and superwideband extension layer using linear prediction-based sinusoidal coding. The proposed extension codec operates on 5ms frame and provides four superwideband bitrates of 64, 80, 96, and 112 kbit/s depending on the core codec. Since the resulting bitstream has an embedded structure, it can be converted into core bitstream by simple truncation without transcoding. The proposed codec has a short algorithmic delay and low complexity and passed the qualification test of G.711.1 and G.722 superwideband extension codec performed by ITU-T.

• Journal of Broadcast Engineering
• /
• v.18 no.5
• /
• pp.691-701
• /
• 2013

In this paper, an early termination algorithm for merge process is proposed to reduce the computational complexity in High Efficiency Video Coding (HEVC) encoder. In the HEVC, the same candidate modes from merge candidate list (MCL) are shared to predict a merge or merge SKIP mode. This search process is performed by the number of the obtained candidates for the both of the merge and SKIP modes. This may cause some redundant search operations. To reduce this redundant search operation, we employ the neighboring blocks which have been encoded in prior, to check on the contextual information. In this study, the spatial, temporal and depth neighboring blocks have been considered to compute a correlation information. With this correlation information, an early termination algorithm for merge process is suggested. When all modes of neighboring blocks are SKIP modes, then the merge process performs only SKIP mode. Otherwise, usual merge process of HEVC is performed Through experimental results, the proposed method achieves a time-saving factor of about 21.25% on average with small loss of BD-rate, when comparing to the original HM 10.0 encoder.

• The KIPS Transactions:PartB
• /
• v.18B no.3
• /
• pp.117-130
• /
• 2011

The purpose of this study is to produce a better way to detect crossroad accidents, which involves an efficient method to produce background images in consideration of object movement and preserve/demonstrate the candidate accident region. One of the prior studies proposed an employment of traffic signal interval within crossroad to detect accidents on crossroad, but it may cause a failure to detect unwanted accidents if any object is covered on an accident site. This study adopted inverse perspective mapping to control the scale of object, and proposed different ways such as producing robust background images enough to resist surrounding noise, generating candidate accident regions through information on object movement, and by using edge information to preserve and delete the candidate accident region. In order to measure the performance of proposed algorithm, a variety of traffic images were saved and used for experiment (e.g. recorded images on rush hours via DVR installed on crossroad, different accident images recorded in day and night rainy days, and recorded images including surrounding noise of lighting and shades). As a result, it was found that there were all 20 experiment cases of accident detected and actual effective rate of accident detection amounted to 76.9% on average. In addition, the image processing rate ranged from 10~14 frame/sec depending on the area of detection region. Thus, it is concluded that there will be no problem in real-time image processing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.60-65
• /
• 2007

According to the customers' demands, cellular phones are getting thinner and thinner in spite that their functions are getting more complex and flexible. Based on this trend, we are willing to propose new design of ultra slim cellular phone with multi-hinges which can provide thinner feature and wider active area than the current merchandised one. To make it come true, smaller and stronger mechanical parts would be necessary and more researches would be carried out in the near future. Moreover, the new frame of ultra slim cellular phone has the problem in heat propagation due to its thin feature and multi function. In this paper, slim heat-spreader would be proposed as a candidate to resolve the problem of heat transfer in the new cellular phone. To investigate the applicability of heat-spreader to cellular phones, prototypes were fabricated and verified.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.768-773
• /
• 2011

Today's urban transit system is regarded as the important public transportation service which saves passengers' time and provides the safety. Many researches focus on the rapid and protective responses that minimize the losses when dangerous situation occurs. In this paper we proposed the early fire detection and corresponding rapid response method in urban transit system by combining automatic fire detection for video input and the sensor system. The fire detection method consists of two parts, spark detection and smoke detection. At the spark detection, the RGB color of input video is converted into HSV color and the frame difference is obtained in temporal direction. The region with high R values is considered as fire region candidate and stepwise fire detection rule is applied to calculate its size. At the smoke detection stage, we used the smoke sensor network to secure the credibility of spark detection. The proposed system can be implemented at low prices. In the future work, we would improve the detection algorithm and the accuracy of sensor location in the network.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.4
• /
• pp.531-540
• /
• 2004

Development of Web service application requires the interoperability between various heterogeneous systems, extensibility to allow modification of business environment not of user interface, maintainability, flexibility and reusability As the properties of CBD (Component Based Development) have gradually become clear, attention has started to turn the smooth technology and methodology to solve the existing problems and issues the dynamic responds for the distributed web environments. In this paper, we identify some of the major architectural affecting CBD and describe the Design and Implementation of Security Framework for Application Server with Components. We identify the candidate components, model it using UML and layer it on the architecture. The frameworks will Provide the various security functions, such as incorporating with legacy security systems, supporting of J2EE, JAAS and Kerberos and assisting in increasing the tailorability of component.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.767-771
• /
• 2005

Expression in yeast may prove more amenable to generating large amounts of viral antigens for a vaccine candidate. We, therefore, cloned the gene encoding the Hepatitis C virus (HCV) structural proteins (C-El-E2, c740) fused in-frame with, and immediately 3' to, the chicken-lysozyme signal peptide (C-SIG) gene and under the control of the yeast glyceraldehyde-3-phosphate dehydrogenase gene promoter. In yeast, the HCV structural proteins were expressed in two different forms: a processed and a nonprocessed aggregated form. Biophysical characterization by sucrose linear gradient centrifugation revealed that both forms were present in the same fractions with a buoyant density of 1.127-1.176 g/$cm^3$. These findings suggest that the efficient synthesis of HCV structural proteins in yeast may be an important tool to study virus assembly and may lead to the development of an HCV vaccine.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.4
• /
• pp.149-156
• /
• 2008

There is the temporal correlation of a animation sequence between the motion vector of current block and the motion vector of previous block. In this paper, we propose the scene change detection algorithm for block matching using the temporal correlation of the animation sequence and the center-biased property of motion vectors. The proposed algorithm determines the location of a better starting point for the search of an exact motion vector using the point of the smallest SAD(sum of absolute difference) value by the predicted motion vector from the same block of the previous frame and the predictor candidate point on each search region. Simulation results show that the proposed algorithm has better detection performance, such as recall rate, then the existing method. The algorithm has the advantage of speed, simplicity and accuracy. In addition, it requires less amount of storage.