• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.4
• /
• pp.161-167
• /
• 2001

Camera calibration is very important problem in 3D measurement using vision system. In this paper is proposed the simple method for camera calibration. It is designed that uses the principle of vanishing points and the concept of corresponding points extracted from the parallel line pairs. Conventional methods are necessary for 4 reference points in one frame. But we proposed has need for only 2 reference points to estimate vanishing points. It has to calculate camera parameters, focal length, camera attitude and position. Our experiment shows the validity and the usability from the result that absolute error of attitude and position is in $10^{-2}$.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.862-873
• /
• 2023

Determining whether an autonomous self-driving agent is in the middle of an intersection can be extremely difficult when relying on visual input taken from a single camera. In such a problem setting, a wider range of views is essential, which drives us to use three cameras positioned in the front, left, and right of an agent for better intersection recognition. However, collecting adequate training data with three cameras poses several practical difficulties; hence, we propose using data collected from one camera to train a three-camera model, which would enable us to more easily compile a variety of training data to endow our model with improved generalizability. In this work, we provide three separate fusion methods (feature, early, and late) of combining the information from three cameras. Extensive pedestrian-view intersection classification experiments show that our feature fusion model provides an area under the curve and F1-score of 82.00 and 46.48, respectively, which considerably outperforms contemporary three- and one-camera models.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.469-473
• /
• 2024

In this paper proposes a study on the development of a multi-camera inline inspection system using machine vision for quality inspection of pharmaceutical containers. The proposed technique captures the pharmaceutical containers from multiple angles using several cameras, allowing for more accurate quality assessment. Based on the captured data, the system inspects the dimensions and defects of the containers and, upon detecting defects, notifies the user and automatically removes the defective containers, thereby enhancing inspection efficiency. The development of the multi-camera inline inspection system using machine vision is divided into four stages. First, the design and production of a control unit that fixes or rotates the containers via suction. Second, the design and production of the main system body that moves, captures, and ejects defective products. Third, the design and development of control logic for the embedded board that controls the entire system. Finally, the design and development of a user interface (GUI) that detects defects in the pharmaceutical containers using image processing of the captured images. The system's performance was evaluated through experiments conducted by a certified testing agency. The results showed that the dimensional measurement error range of the pharmaceutical containers was between -0.30 to 0.28 mm (outer diameter) and -0.11 to 0.57 mm (overall length), which is superior to the global standard of 1 mm. The system's operational stability was measured at 100%, demonstrating its reliability. Therefore, the efficacy of the proposed multi-camera inline inspection system using machine vision for the quality inspection of pharmaceutical containers has been validated.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.72-77
• /
• 2023

In many manufacturing settings, including the semiconductor industry, products are completed by producing and assembling various components. Sorting out from randomly mixed parts and classification operations takes a lot of time and labor. Recently, many efforts have been made to select and assemble correct parts from mixed parts using robots. Automating the sorting and classification of randomly mixed components is difficult since various objects and the positions and attitudes of robots and cameras in 3D space need to be known. Previously, only objects in specific positions were grasped by robots or people sorting items directly. To enable robots to pick up random objects in 3D space, bin picking technology is required. To realize bin picking technology, it is essential to understand the coordinate system information between the robot, the grasping target object, and the camera. Calibration work to understand the coordinate system information between them is necessary to grasp the object recognized by the camera. It is difficult to restore the depth value of 2D images when 3D restoration is performed, which is necessary for bin picking technology. In this paper, we propose to use depth information of RGB-D camera for Z value in rotation and movement conversion used in calibration. Proceed with camera calibration for accurate coordinate system conversion of objects in 2D images, and proceed with calibration of robot and camera. We proved the effectiveness of the proposed method through accuracy evaluations for camera calibration and calibration between robots and cameras.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.671-677
• /
• 2017

A new INS/Vision integrated navigation system by using multi-vision sensors is addressed in this paper. When the total number of landmark measured by the vision sensor is smaller than the allowable number, there is possibility that the navigation filter can diverge. To prevent this problem, multi-vision concept is applied to expend the field of view so that reliable number of landmarks are always guaranteed. In this work, the orientation of camera installed are 0, 120, and -120degree with respect to the body frame to improve the observability. Finally, the proposed technique is verified by using numerical simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.598-602
• /
• 2003

In this paper, we propose the method to control the position of LDM(Linear DC Motor) using vision system. The proposed method is composed of a vision system for position detecting, and main computer calculates PID control output which is deliver to 8051 actuator circuit in serial communication. To confirm the usefulness of the proposed method, we experimented about position control of a small size LDM using CCD camera which has a performance 30frames/sec as vision system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.446-450
• /
• 1993

In this paper we propose an arc welding robot system, where two robots works coordinately and employ the vision sensor. In this system one robot arm holds a welding target as a positioning device, and the other robot moves the welding torch. The vision sensor consists of two laser slit-ray projectors and one CCD TV camera, and is mounted on the top of one robot. The vision sensor detects the 3-dimensional shape of the groove on the target work which needs to be weld. And two robots are moved coordinately to trace the grooves with accuracy. In order to realize fast image processing, totally five sets of high-speed parallel processing units (Transputer) are employed. The teaching tasks of the coordinated motions are simplified considerably due to this vision sensor. Experimental results reveal the applicability of our system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1101-1104
• /
• 1995

Through welding fabrication, user can feel an surficaial and capable unsatisfaction because of welded defects, Generally speaking, these are called weld defects. For checking these defects effectively without time loss effectively, weldability estimation system setup isan urgent thing for detecting whole specimen quality. In this study, by laser vision camera, catching a rawdata on welded specimen profiles, treating vision processing with these data, qualititative defects are estimated from getting these information at first. At the same time, for detecting quantitative defects, whole specimen weldability estimation is pursued by multifeature pattern recognition, which is a kind of fuzzy pattern recognition. For user friendly, by weldability estimation results are shown each profiles, final reports and visual graphics method, user can easily determined weldability. By applying these system to welding fabrication, these technologies are contribution to on-line weldability estimation.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.763-764
• /
• 2008

Sensing is an important part of a smart home system. Vision sensors are a type of passive systems, which are not sensitive to noise. In this paper, we implement a prototype for stereo vision systems using OpenCV. It is an open source library for computer vision developed by Intel corporation. The prototype will by used for comparing performance among various stereo algorithms and for developing a stereo vision smart camera.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.11-13
• /
• 2007

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. However the inspection result of machine vision is changed by the illumination of workplace. Therefore we have used a power-law transformation in this paper. for improvement of vision inspection accuracy and could increase inspection accuracy of vision system. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.