• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.179-185
• /
• 2015

The main objective of thermal design for a space-borne FPA(Focal Plane Assembly) is to provide stable thermal environment during imaging operation and thus maintain the image quality. An FPA must be maintained within its operating temperature range and cooled down to its initial temperature soon enough for the next imaging operation. This paper describes the study result on performing trade-off studies for FPA thermal design by using simplified thermal node analysis about FPA preliminary design. It also describes the verification results of the study by comparing thermal analysis results and trade-off study results. According to results, we can conclude that this approach is useful for simple and quick trade-off studies without thermal analysis based on thermal math models.

• The Korean Journal of Nuclear Medicine
• /
• v.26 no.2
• /
• pp.360-364
• /
• 1992

Treatment for the brain tumors consist of surgery, chemotherapy, and a variety of methods of irradiation. Therapy is aimed to destroy the tumor, but necrosis and edema occur concurrently. Conventional structural imaging techniques such as CT or MRI are unable to reliably distinguish persistent and recurrent tumor from necrosis or edema. T1-201 has been shown to be useful in the evaluation of the myocardial viability by comparing the early uptake and redistribution image. The aim of this study is to evaluate the clinical usefulness of the early uptake and delayed washout images of the T1-201 brain SPECT in the brain tumors. In the pathologically diagnosed various brain tumor patients, brain SPECT was done with rotating gamma camera 15 minutes and 3 hours after T1-201 injection, and the T1-201 uptake in the tumor was compared with the skull and scalp activity. In the glioblastoma multiforme, meningioma and metastatic tumor, the T1-201 uptake was higher than low grade glioma in both 15 minute and 3 hour images (p<0.02). In the low grade glioma,3 hour T1-201 uptake was significantly lower than 15 minute uptake (p<0.05) but in the glioblastoma, meningioma and metastatic tumor there was no significant difference. There was no significant difference in the T1-201 uptake among the glioblastoma, meningioma and metastatic tumors. In one matastatic tumor, T1-201 uptake was decreased after radiation therapy. T1-201 brain SPECT could distinguish the benign and malignancy, and seems to be useful in the follow-up after treatment. But one of the early or delayed SPECT seems not to be necessary for these purposes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.51-57
• /
• 2000

With the emergence of laser mapping systems, higher resolution DTM of urban area can be acquired and can be used to generate precise orthoimage. But, when the conventional orthoimage generation methods are applied to the area containing features with height difference such as cliffs, bridges, banks. elevated highways and buildings, they cause problems such as occlusion and double mapping. Therefore, this study proposes a new algorithm by modifying and refining conventional orthoimage generation methods. With this algorithm, areas which have occlusion are detected from the base image using camera orientation parameters and DTM. Also, detected areas are restored using alternative images which does not have occlusion in that area. This study can be distinguished from the other studies in the aspects that the proposed algorithm in this paper doesn't need information on building and that uses DTM data and orientation parameters.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.429-435
• /
• 2009

This paper propose color assessment method using HSI model to evaluate quantitative quality of mosaic images by aerial digital frame camera. Firstly, we convert RGB color into HSI model and we extract six pixel information of S and I corresponding to H from adjacency image by using HSI model. Secondly, a method to measure similarity and contrast is proposed and performed for assesment of observation regarding adjacency images. Through these procedure, we could generate four parameters. We could observe that both of the evaluation results by proposed method and the evaluation results by visual were almost similar. This facts support that our method based on several formula can be an objective method to evaluate a quality of mosaic images itself.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.621-631
• /
• 1996

It is said that robot can be used for multi-purpose use by changing end effector or/and visual sensor with its software. In this study, it was investigated what multi-purpose robot for fruit-production was using a tomato harvesting robot and a robot to work in vineyard. Tomato harvesting robot consisted of manipulator, end-effector, visual sensor and traveling device. Plant training system of larger size tomato is similar with that of cherry-tomato. Two end-effectors were prepared for larger size tomato and cherry-tomato fruit harvesting operations, while the res components were not changed for the different work objects. A color TV camera could be used for the both work objects, however fruit detecting algorithm and extracted features from image should be changed. As for the grape-robot , several end-effector for harvesting , berry thinning , bagging and spraying were developed and experimented after attaching each end-effector to manipulator end. The manipulator was a polar coordinate type and had five degrees of freedom so that it could have enough working space for the operations. It was observed that visual sensor was necessary for harvesting, bagging and berry-thinning operations and that spraying operation requires another sensor for keeping certain distance between trellis and end-effector. From the experimental results, it was considered that multi-operations by the same robot could be appropriately done on the same or similar plant training system changing some robot components . One of the important results on having function of multi-operation was to be able to make working period of the robot longer.

• Journal of Korean Society of Rural Planning
• /
• v.13 no.1 s.34
• /
• pp.73-84
• /
• 2007

The first theme of this study is to preserve and manage rural multi-functionality resource Information. This study is to suggest the method that can irradiate rural multi-functionality resource Information efficiently and constructively. GIS uses PDA and Tablet PC as an investigation tool and verifies the outcome of the development in the investigation system. This study enhanced the mobility function of PDA by installing recording system and camera to the PDA. Also, Using GPS has been ensured scientific precision and realism to the investigation. Direct input on spot can save time, cost and minimize human error by simplifying the investigation process. Database is composed of characters like scale, form, location, distance, resident's opinion and image of 37 resources. The survey system was applied in 170 villages and got a total of 12,270 resources data. Management system should be easy to input and output the surveyed information and to get reports in any kind of form ( i.e. final result can be produced as a map). By utilizing of the Rural Resource information system, the study made a simulation to compare the target areas before and after. Also, digitalized investigation system, minimized re-input and reprocessing of data and enabled to simplify and standardize the process than memorandum investigation. Data collected through digital system could offer people useful information by Web-GIS. It was need to specify practical way in decision-making and a way to measure the value of resources to align with the regional plan. Also, need to keep on developing statistical data and application program that can connect us to present the best solution to support regional planning. Therefore, quality of data is very important. Finally, it is very important to develop various programs to analyze space md rural resource by monitoring rural environment.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.4
• /
• pp.253-258
• /
• 2009

Bone scintigraphy using $^{99m}$Tc-labeled phosphate agents has long been the standard evaluation method for whole skeletal system. However, recent shortage of $^{99m}$Tc supply and advanced positron emission tomography (PET) technology evoked the attention to surrogate radiopharmaceuticals and imaging modalities for bone. Actually, fluorine-18 ($^{18}$F) was the first bone seeking radiotracer before the introduction of $^{99m}$Tc-labeled agents even though its clinical application failed to become pervasive anymore after the rapid spread of Anger type gamma camera systems in early 1970s. However, rapidly developed PET technology made us refocus on the usefulness of $^{18}$F as a PET tracer. Early study comparing $^{18}$F-Na PET scan and planar bone scintigraphy reported that PET has higher sensitivity and specificity in the diagnosis of metastatic bone lesions than planar bone scan. Subsequent reports comparing between PET and both planar and SPECT bone image also revealed better results of PET scan in similar study groups. Rapid clinical application of PET/CT also accumulated considerable amount of experiences in skeletal evaluation and this modality is known to have better diagnostic power than stand alone PET system as well as bone scan. Furthermore $^{18}$F-Na PET/CT revealed better or at least equal results in detection of primary and metastatic bone lesions compared with CT and MRI. Therefore, it is obvious that $^{18}$F-Na PET/CT has potential to become new imaging modality for practical skeletal evaluation so continuous and careful evaluation of this modality and radiopharmaceutical must be required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.239-245
• /
• 2020

Recently, BIM (Building Information Modeling) are widely being utilized in Construction industry. However, most structures that have been constructed in the past do not have BIM. For structures without BIM, the use of SfM (Structure from Motion) techniques in the 2D image obtained from the camera allows the generation of 3D model point cloud data and BIM to be established. However, since these generated point cloud data do not contain semantic information, it is necessary to manually classify what elements of the structure. Therefore, in this study, deep learning was applied to automate the process of classifying structural components. In the establishment of deep learning network, Inception-ResNet-v2 of CNN (Convolutional Neural Network) structure was used, and the components of bridge structure were learned through transfer learning. As a result of classifying components using the data collected to verify the developed system, the components of the bridge were classified with an accuracy of 96.13 %.

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.53-58
• /
• 2003

This study was carried out to design, construct, and test a greenhouse monitoring system fur the environment and status of control devices in a greenhouse from a remote site using internet. The measuring items selected out of many environmental factors were temperature, humidity, solar radiation, CO$_2$, SOx, NOx concentration, EC, pH of nutrient solution, the state of control devices, and the image of greenhouse. The developed greenhouse monitoring system was composed of the network system and the measuring module. The network system consists of the three kinds of monitors named the Croup Monitor. the Client Monitor and the Server Monitor. The results of the study are summarized as follows. 1. The measuring module named the House Monitor. which is used to watch the state of the control device and the environment of the greenhouse, was developed to a embedded monitoring module using one chip microprocessor 2. For all measuring items. the House Monitor showed a satisfactory accuracy within the range of ${\pm}$0.3%FS. The House Monitors were connected to the Croup Monitor by communication method of RS-485 type and could operate under power and communication fault condition within 10 hours. The Croup Monitor was developed to receive and display measurement data received from the House Monitors and to control the greenhouse environmental devices. 3. The images of the plants inside greenhouse were captured by PC camera and sent to the Group Monitor. The greenhouse manager was able to monitor the growth state of plants inside greenhouse without visiting individual greenhouses. 4. Remote monitoring the greenhouse environment and status of control devices was implemented in a client/server environment. The client monitor of the greenhouse manager at a remote site or other greenhouse manager was able to monitor the greenhouse environment and the state of control devices from the Server Monitor using internet.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.281-289
• /
• 1998

Korea is developing a Korea Multi-Purpose Satellite I (KOMPSAT-1) as one of Korea National Space Program, which will be launched in 1999. The EOC (Electro-Optical Camera) is the primary payload for KOMP-SAT-1. The main mission of EOC is to provide the images for the production of scale maps of Korean territory. This research is focused on methodology and possibility for the production of topographic maps using EOC sensor. Since the imagery from EOC is not yet available, SPOT Level 1A image data which are quite similar to those of EOC, and Intergraph Imagestation (Digital Photogrammetric Workstation) are implemented in the process of sample digital map generation. The sample digital maps generated from SPOT stereoimages were compared and analyzed with the existing 1:50,000 scale digital map produced by National Geography Institute. The feasibility and problem encountered in 1:50,000 scale digital mapping using SPOT stereoimages were presented. Based on results, the feasibility and further research areas for KOMPSAT-EOC in the line of 1:25,000 and 1;50,000 digital mapping were discussed.