• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.55.3-55.3
• /
• 2015

한국천문연구원에서 개발 중인 KMTNet 망원경은 2014년 칠레(5월), 남아공(8월), 호주(11월)에 설치가 완료되었다. 망원경 설치 이후, 연구관측용 광시야 18k CCD 카메라를 설치하기 전까지의 기간 동안 시험관측용 4k CCD 카메라(STX-16803)를 활용하여 관측을 수행하였다. 시험관측 대상으로는 KMTNet의 주 관측 영역인 우리은하 팽대부처럼 별이 밀집된 영역에서 영상차감법(Difference Image Analysis; DIA)을 활용해 변광하는 천체를 찾기 위해 $25^{\prime}{\times}25^{\prime}$의 CCD 관측 영역에 적당한 6개의 남반구 구상성단을 선정하였다. 본 발표에서는 관측된 성단의 측광 결과와 영상차감법을 이용해 찾은 변광성에 대해 논의할 예정이다.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.21-25
• /
• 2013

The purpose of this study is to provide basic data for the safety assessment of a water purifier when water leaks due to inappropriate maintenance and the examination of the cause of accidents related to the leak. Due to its inspection and management by non-specialists, if a leak occurs in a water purifier with the water level controller being inclined, it may result in the failure of the compressor, power supply line, PCB, etc. The analysis of the thermal diffusion pattern of water purifier compressors using a thermal image camera shows that its maximum temperature was approximately $80^{\circ}C$. In addition, its operating current was a maximum of 13 A and the system's operating current was approximately 1.7 A after the compressor was charged. It was found that the housing type power cable cover of the compressor had the effect of preventing electric shock but has poor flame resistance. Furthermore, the performance of the overload protector, PTC relays, etc., was excellent but they have potential for problems as metallic terminals were exposed, resulting in the potential of a safety related accident. The terminals and their surface damaged by the tracking showed a trace of carbonization and the resistance between terminals was measured to be approximately $8{\Omega}$. In addition, while the tracking was proceeding, the fuse and circuit breaker installed for system protection did not operate.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.123-128
• /
• 2002

This study is to develop optical lining device for vacuum binding of PDP and FED. It is very difficult precise technology to line a front board and back board accurately and fast every time when two boards are joined together. Especially, these technology is difficult to be transferred from developed countries. In this study, the accuracy of lining of two boards in vacuum device by developing an optical lining device for vacuum binding as an image processor and CCD camera configured to be high magnification lens with long focus using optical design.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1222-1227
• /
• 2006

본 연구의 목적은 객체의 형상정보(3D mesh)와 색/질감정보(image)를 이용하여 텍스쳐 맵핑된 고품질의 가상모델을 생성하는데 있다. 3 차원 형상정보에 대응하는 이미지 상의 텍스쳐 좌표 관계를 구하기 위해 오브젝트 좌표계와 카메라 좌표계 사이의 변환행렬, 카메라의 초점거리, 카메라 CCD 와 프레임상의 이미지 사이의 aspect ratio 를 파라미터로 하는 3D-2D 정합을 수행한다. 이러한 3D-2D 정합을 효율적으로 수행하기 위하여, 카메라 내부파라미터 검정단계, 신뢰도가 높은 초기해 설정단계, 비선형 최적화(Newton method) 단계로 접근한다. 또한, 색/질감정보로 이용되는 객체의 이미지는 촬영조건에 의해 스펙큘러(specular)나 이미지 픽셀값의 포화상태(saturation) 등의 결점을 포함한다. 영상내의 스펙큘러 좌표와 3D-2D 정합의 결과를 이용하여 촬영 당시의 광원을 추정하고, 근사화된 빛반사도 함수(BRDF)를 이용하여, 텍스쳐의 픽셀값 변조를 통해 이미지 촬영 당시의 광원효과가 제거된 디퓨즈 텍스쳐를 획득한다. 본 연구에서는 퐁(Phong)의 모델을 근사화한 빛 반사도 함수 모델로 사용하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.11
• /
• pp.1060-1066
• /
• 2007

When a high-energy ultrasound propagates through a solid body that contains a crack or a delamination, the two faces of the defect do not ordinarily vibrate in unison, and dissipative phenomena such as friction, rubbing and clapping between the faces will convert some of the vibrational energy to heat. By combining this heating effect with infrared imaging, one can detect a subsurface defect in material efficiently. In this paper a detection of the welding defect of thin SUS 304 plates using the UIR (ultrasonic infrared imaging) technology is described. A low frequency (20kHz) ultrasonic transducer was used to infuse the welded thin SUS 304 plates with a short pulse of sound for 280ms. The ultrasonic source has a maximum power of 2kW. The surface temperature of the area under inspection is imaged by a thermal infrared camera that is coupled to a fast frame grabber in a computer. The hot spots, which are a small area around the defect tip and heated up highly, are observed. From the sequence of the thermosonic images, the location of defective or inhomogeneous regions in the welded thin SUS 304 plates can be detected easily.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.253-257
• /
• 2019

A deep learning based real-time painting surface inspection algorithm is proposed herein, designed for developing an autonomous inspection drone. The painting surface inspection is usually conducted manually. However, the manual inspection has a limitation in obtaining accurate data for correct judgement on the surface because of human error and deviation of individual inspection experiences. The best method to replace manual surface inspection is the vision-based inspection method with a camera, using various image processing algorithms. Nevertheless, the visual inspection is difficult to apply to surface inspection due to diverse appearances of material, hue, and lightning effects. To overcome technical limitations, a deep learning-based pattern recognition algorithm is proposed, which is specialized for painting surface inspections. The proposed algorithm functions in real time on the embedded board mounted on an autonomous inspection drone. The inspection results data are stored in the database and used for training the deep learning algorithm to improve performance. The various experiments for pre-inspection of painting processes are performed to verify real-time performance of the proposed deep learning algorithm.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.862-866
• /
• 2004

Non-intrusive methods based on active remote IR illumination for eye tracking is important for many applications of vision-based man-machine interaction. One problem that has plagued those methods is their sensitivity to lighting condition change. This tends to significantly limit their scope of application. In this paper, we present a new real-time eye detection and tracking methodology that works under variable and realistic lighting conditions. Based on combining the bright-pupil effect resulted from IR light and the conventional appearance-based object recognition technique, our method can robustly track eyes when the pupils are not very bright due to significant external illumination interferences. The appearance model is incorporated in both eyes detection and tracking via the use of support vector machine and the mean shift tracking. Additional improvement is achieved from modifying the image acquisition apparatus including the illuminator and the camera.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.193-202
• /
• 2012

In this paper, we propose a new approach for compact range sensor system for real-time robot applications. Instead of using off-the-shelf camera and projector, we devise a compact system with a CMOS image-sensor and a DMD (Digital Micro-mirror Device) that yields smaller dimension ($168{\times}50{\times}60mm$) and lighter weight (500g). We also realize one chip hard-wired processing of projection of structured-light and computing the range by exploiting correspondences between CMOS images-ensor and DMD. This application-specific chip processing is implemented on an FPGA in real-time. Our range acquisition system performs 30 times faster than the same implementation in software. We also devise an efficient methodology to identify a proper light intensity to enhance the quality of range sensor and minimize the decoding error. Our experimental results show that the total-error is reduced by 16% compared to the average case.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.181-187
• /
• 2011

In this paper, we proposed the vision-based efficient algorithm for road slide detection like as destruction of road cut slope. The proposed algorithm defines the image region as non surveillance and surveillance which is further divided by road, boundary and non road region. After that, it find the moving block, remember the history of movement using the TTL(Time To Live) table, determine the road slide by checking the existence of moving blocks from non road region to road region together. We confirmed the proposed algorithm detected the road slide effectively through experiments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.93-98
• /
• 2011

In this paper, we propose a game type cognitive rehabilitation system using marker-based augmented reality system for intelligence development of user. Existing cognitive rehabilitation with the help of others, or a keyboard or mouse operation required to relieve the discomfort, the marker card only control it led and is advanced the method which it applied. As a result, obtained through the camera calibration for image processing, and a Augmented Reality as well as mark detection. In this paper we presented a complete rotation of the model after checking through the whole form, through a combination of multiple markers by completing the interactive objects proceed with the rehabilitation process in a manner required by the target of interest to human rehabilitation and treatment.