• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.43-48
• /
• 2018

In this study, we performed various extraction condition experiments such as types and concentrations of extractants, amounts of extraction sources, pretreatment processes, to optimize the calcium ion extraction for precipitated calcium carbonate (PCC) production. CaO was used as a calcium extraction source, The extraction amount of calcium ions and the particle size of CaO were determined by ICP and SEM results. As a result, 100% calcium ion was extracted when 2 M hydrochloric acid was used as an extractant, and the optimum amount of the extraction source was 6 g. On the other hand, it was confirmed that the reaction time, reaction temperature, particle milling and heat treatment process had no significant effect on the calcium ion extraction amount.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.103-107
• /
• 2020

The purpose of this study is to resource calcium ions contained in most industrial by-products, and confirm the characteristics of calcium ions by extraction and separation conditions. Calcium oxide was used as a calcium extraction source, and hydrochloric acid as an extraction solvent, and the extraction amount according to the concentration of the extraction solvent and the pH dependent characteristics of the extract were analyzed. As the extractant concentration increased, the extracted amount increased while the pH for the extraction was kept constant. In order to separate extracted calcium ions, an acid-basic solution was injected and the formation of precipitates and also the form of precipitates were analyzed. When the sulfuric acid and sodium hydroxide solution of acid and basic substances were injected into the calcium extract, precipitates were formed and separated into CaSO₄ and Ca(OH)₂ forms.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.855-858
• /
• 1995

Vegetables contain more or less calcium. By the traditional method the total calcium in the vegetable was analyzed. A part or calcium in the vegetable is fixed as calcium oxalate and the calcium does not utilize for nutrition. In this investigation the free calcium was determined by extraction in boiling water, the combined calcium with oxalic acid was determined by extraction in 0.1 M hydrochloric aci and the other calcium combined with protein, amino acid etc. was estimated. The amount of calcium obtained from the difference between the total calcium and calcium exmtaining in calcium oxalate was estimated to be nutritious.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.284-293
• /
• 2022

After extracting the calcium component from the KR slag and the converter slag using ammonium chloride solution, the extract was reacted with carbon dioxide to synthesize precipitated calcium carbonate (PCC). In order to understand the effect of ultrasonic waves on calcium extraction from slags and calcium carbonate synthesis, the efficiency of calcium carbonate synthesis according to the with or without of ultrasonic waves was analyzed. The synthetic efficiency of PCC was investigated according to various experimental conditions, and the synthesized calcium carbonate was analyzed using XRD and SEM. In both slags, the amount of PCC decreased as the reaction temperature increased. The pH at the end of the experiment capable of synthesizing the maximum PCC in the carbonation reaction was 7 (irradiated with ultrasound) and 8 (irradiated without ultrasound), respectively. Because the pH of the extraction filtrate is different when irradiated with or without ultrasound, the pH was adjusted to 9 by injecting an additive (10 M NaOH) before the carbonation experiment, and then the experiment was performed. When calcium was extracted from KR slag, the crystal phase appeared as calcite regardless of the pH at the end of the experiment. However, when calcium was extracted from the converter slag and the pH was set to 7 at the end of the experiment, the crystal phase of PCC appeared as a mixture of calcite and vaterite.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.1
• /
• pp.61-64
• /
• 1990

The influence of extraction time on the fatty acid profile and the contents of calcium and magnesium in pig's shank were examined. The 9 kinds of fatty acid were identified in water extracts from pig's shank by GLC. The profiles of fatty acids from different extraction were similer to each other,. The content of linolenic acid was increased after two-hours extraction however the amounts of MUFA, PUFA and p/s ratio were decreased by the longer extraction time. The amount of calcium was 124.7mg% in raw materials but water extracts and bone powder samples showed higher values. in case of magnesium it was 138.4mg% in raw materials, but the extracts showed lower amount and bone powder exhibited higher values.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.32.1-32.7
• /
• 2019

Background: Tooth extraction commonly leads to loss of residual alveolar ridge, thus compromising the room available for the implant placement. To combat the post-extraction alveolar loss, alveolar ridge preservation is practiced, with the advent of the biomaterial available. The purpose of this study was to assess the efficiency of calcium phosphosilicate biomaterial in alveolar ridge preservation. Twenty patients indicated for extraction were selected followed by socket grafting using calcium phosphosilicate. Implant placement was done 6 months postoperatively during which a core was harvested from the preserved sockets. Clinico-radiographic measurements of hard and soft tissues were taken at baseline and 6 months post-grafting. Results: There were no significant changes in the radiographic and soft tissue parameters while significant changes in hard tissue parameters with 1.9 mm (p = 0.013) gain in mid-buccal aspect and 1.1 mm (p = 0.019) loss in horizontal bone width were observed. The histomorphometric evaluation depicted the vital bone volume of 54.5 ± 16.76%, non-mineralized tissue 43.50 ± 15.80%, and residual material 2.00 ± 3.37%. Conclusion: The implants placed in these preserved ridges presented 100% success rate with acceptable stability after a 1-year follow-up, concluding calcium phosphosilicate is a predictable biomaterial in alveolar ridge preservation.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.37-42
• /
• 2017

It has been reported that aqueous indirect carbonation process of calcium silicate mineral could be one of the most promising methods for $CO_2$ sequestration. The process consists of two main steps, extraction of Ca from calcium silicate and carbonation of the extracted solution by $CO_2$. Many types of acids such as HCl and $HNO_3$ can be used in the extraction step of the process. In the case of using aqueous acetic acid solution as the extraction solvent, acetic acid can be reproduced at the carbonation step of the extracted solution by $CO_2$ and recycled to extraction step for reuse it. Industrial by-products such as iron and steel slags are potential raw materials of the indirect carbonation process due to their high contents of calcium silicate. In this study, in order to examine the extraction efficiency of domestic electric arc furnace steel slag by aqueous acetic acid solution, extraction experiments of the slag were performed by using the aqueous acetic acid solutions of varying extraction conditions ; acetic acid concentrations, extraction temperatures and times.

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.525-529
• /
• 1990

Plant cell cultures of Lithospermum erythrorhizon were performed in stirred tank and packed-bed reactors with in situ extraction by n-hexadecane. The specific shikonin production and volumetric shikonin productivity of stirred tank reactor reached 1.5 mg shikoninlg cell and 400$\mu g$ shikonin/(L.day), respectively. In packed-bed reactor with calcium alginate-immobilized cells specific shikonin production and volumetric productivity reached 2.0 mg shikoninlg cell and 2857$\mu g$ shikonin/(L.day), which were 1.3 and 7.1 times higher than those of stirred tank reactor, respectively. The higher shikonin production and productivity of packed-bed reactor seemed to be due to high cell loading capacity of calcium alginate immobilized cells in packed-bed reactor and improved cell-cell contact.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.26 no.2
• /
• pp.91-107
• /
• 1996

The purpose of this study was to investigate effects of osteoporosis on extraction wound healing in the calcium deficient rat. In order to carry out this study, ten-week old Wistar strain rats weighing about 300 gms were selected. When the rats reached thirteen-week old, rats' mandibular first molars were removed. The rats were then divided into three groups: Group l(rats given a normal diet both before and after tooth extraction), Group 2(rats given a low calcium diet for three weeks before tooth extraction and a normal diet after tooth extraction), and Group 3(rats given a low calcium diet for three weeks before and after tooth extraction). The healing of extraction wounds, as assessed by microradiography, autoradiography, and histopathologic examination, were compared among these three groups. The obtained results were as follows : I. In Group 1, newly formed bone and active uptake of 45Ca around extraction wound were noted on the 3rd and the 7th day. On the 14th and the 21st day, the extraction wounds of this group showed the bone trabecular formation and active 4Ca uptake in the extraction wound and alveolar crest. The more prominent bone trabeculae with a less uptake of /sup 45/Ca were noted on the 42nd day. 2. In Group 2, newly formed bone and thinning of alveolar bone trabeculae with more extensive uptake of /sup 45/Ca than that in Group 1 were noted on the 3rd and the 7th day. On the 14th day, bone trabeculae were less thicker than that in Group 1. The prominent bone trabeculae in the extraction wounds and alveolar crest were noted on the 21st and the 42nd days. 3. In Group 3, newly formed bone was noted on the 3rd and the 7th day. Alveolar bone trabeculae and uptake of /sup 45/Ca were similar to that in Group 2. On the 14th and 21st day, bone trabeculae were less thicker than that in Group 2 and Group 3. The osteoporotic change with active uptake of /sup 45/Ca was markedly noted on the 42nd day.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.665-675
• /
• 2010

The effects of chemical binders (ladle slag, ordinary portland cement (OPC), hydroxyapatite and calcium hydroxide) on the solidification/stabilization of heavy metals (Cd, Cu, Ni, Pb, Zn) in sewage sludge were evaluated by chemical leaching tests such as EDTA extraction, TCLP and sequential extraction. The results of EDTA extraction showed that heavy metal concentrations in sewage sludge were highly reduced after solidification/stabilization with slag, cement or calcium hydroxide. However, EDTA interrupted solidification/stabilization of heavy metals by hydroxyapatite. The TCLP-extracted heavy metal concentrations in sewage sludge after solidification/stabilization with chemical amendments were highly reduced. However, Cu concentration in the sewage sludge solidified/stabilized with slag, cement or calcium hydroxide increased because the pH of TCLP solution was higher than 7. Mixtures of sludge 1 : slag 0.2 : calcium hydroxide 0.1 (wt ratio) showed the least leachability in batch TCLP and EDTA extraction. The results of sequential extraction (SM&T, formaly BCR) indicated that the distribution of heavy metals changed from exchangable and carbonate fractions to strongly bound organic fraction. It was found that maximum leachate concentrations of Ba, Cd, Cr and Pb from sewage sludge amended with slag and calcium hydroxide were far below US EPA TCLP regulations.