• 한국공간구조학회논문집
• /
• 제13권2호
• /
• pp.75-82
• /
• 2013

For each cable component in a cable dome structure, pre-tension is needed for stability of whole the structure. The summation of these pre-tension at each joint should be zero to achieve the self equilibrium structure. The first step in cable dome structure analysis is to find the ratio of pre-tension in each member which can produce a stable and structure on self-equilibrium. In this paper, a new method based on the basic principle of closed force polygon for equilibrium system is proposed for the determination of self-equilibrium mode of cable dome structure. A single layer cable dome and two multi layer type domes have been analyzed. The ratios of cable members are determined by the presented method, and check the validation of the results by numerical calculation.

• Smart Structures and Systems
• /
• 제29권1호
• /
• pp.167-179
• /
• 2022

This article develops a long-term condition assessment method for stay cables in cable stayed bridges using the monitored cable tension forces under operational condition. Based on the concept of influence surface, the matched cable tension ratio of two cables located at the same side (either in the upstream side or downstream side) is theoretically proven to be related to the condition of stay cables and independent of the positions of vehicles on the bridge. A sensor grouping scheme is designed to ensure that reliable damage detection result can be obtained even when sensor fault occurs in the neighbor of the damaged cable. Cable forces measured from an in-service cable-stayed bridge in China are used to demonstrate the accuracy and effectiveness of the proposed method. Damage detection results show that the proposed approach is sensitive to the rupture of wire damage in a specific cable and is robust to environmental effects, measurement noise, sensor fault and different traffic patterns. Using the damage sensitive feature in the proposed approach, the metrics such as accuracy, precision, recall and F1 score, which are used to evaluate the performance of damage detection, are 97.97%, 95.08%, 100% and 97.48%, respectively. These results indicate that the proposed approach can reliably detect the damage in stay cables. In addition, the proposed approach is efficient and promising with applications to the field monitoring of cables in cable-stayed bridges.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.375-380
• /
• 2011

Loading/unloading at sea is necessitated as larger container ships are being used. It is also unavoidable to load/unload at sea during military operations. An experimental cable array robot system, which can be used for loading/unloading at sea, consisting of four cables operated by four motors is designed and built. Even though it has simple structure, it has a large pay-load/robot-weight ratio, flexibility and wide workspace and can be easily built at low cost. In order to plan and control the paths of end-effector, two interpolation methods are introduced and compared. Since the robot is entirely based on cable tension, an analysis of tension is also presented for monitoring and planning purpose.

• 한국공간구조학회논문집
• /
• 제16권2호
• /
• pp.89-96
• /
• 2016

Cable structures are lightweight structures of flexible type, cable members have only axial stiffness related to tension, they can carry neither bending nor compression. This study is the analysis of cable truss systems are composed of upper and low cables by connecting bracing cables, the structural principle is based on a tensegrity system by using bracing tension members, discontinuous compression members and continuous tension members. A hanging roof of cable truss system is too flexible against vertical loads, most cable members are stabilized by connecting the prestressed upper and lower cable by bracing cables. A cable truss roof system is formed by adding a set of cables with reverse curvature to the suspension cables. With the sets of cables having opposite curvature to each other, cable truss is able to carry vertical load in both upward and downward direction with equal effectiveness, and then a cable truss acts as load bearing elements by the assemble of ridge cables, valley cables and bracing cables. This paper will be shown the geometric non-linear analysis result of cable truss systems with various sag ratio for deflections and tensile forces, the analytical results are compared with the results of other researchers.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.577-584
• /
• 2019

최근 국내 사장교는 경관적인 요소를 위하여 비정형적인 형태가 시도되고 있다. 새로운 기하구조가 적용된 사장교는 그 특성을 명확히 분석하여 구조안전성을 확보할 필요가 있다. 본 연구 대상 교량은 S자형 곡선 보도사장교로 S자형 평면곡선과 역삼각형트러스 횡단면을 가진 보강거더, 곡선반경 내측에 1면으로 배치된 경사 주탑과 modified Fan 타입 주케이블, 수직 백스테이케이블이 적용되었다. 곡선사장교는 직선사장교와 같이 종방향의 거동에만 초점을 두고 장력을 조정할 경우 횡방향으로 과다한 변위와 모멘트가 발생 할 수 있다. 본 연구는 주케이블이 교량의 횡방향 거동에 미치는 영향을 분석하기 위해서, 장력에 의한 주탑의 횡방향 변위 방향에 따라 케이블을 2개 그룹으로 나누었다. 지간중앙부 케이블 그룹을 GR1, 주탑지점부 케이블 그룹을 GR2라 할 때 GR1과 GR2의 조합비율이 보강거더, 받침, 주탑 그리고 수직앵커케이블에 미치는 영향을 분석하였다. 연구대상 교량에 적용된 장력비율을 1.0GR1+1.0GR2라 하였을 때, 1.2GR1+0.8GR2의 조합에서 주탑지점부 보강거더의 좌측과 우측 상현재 응력이 최소가 되었고, 좌우 부재의 편차도 최소가 되었다. 또한, 받침의 수평력, 주탑의 횡방향 변위와 모멘트, 수직백스테이케이블의 장력도 감소하였다. 본 연구는 유사한 기하구조를 가진 사장교의 장력 결정시 기초 자료로 활용될 것으로 기대된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권3호
• /
• pp.66-73
• /
• 2024

사장교에서 케이블 부재는 하중을 전달하는 가장 중요한 부재 중 하나이다. 따라서 사장교의 구조적 상태 및 안정성을 평가하기 위해서는 케이블의 상태를 파악하기 위해 지속적인 모니터링을 수행하는 것이 중요하다. 이러한 모니터링 시스템은 케이블에 부착된 가속도계를 통해 진동을 측정하고 이를 토대로 케이블 장력과 감쇠비를 추정하고, 이를 토대로 케이블의 상태 평가의 기초자료로 활용한다. 이러한 상시 모니터링 시스템은 지속적으로 진동 데이터를 측정하기 때문에 데이터 수집 시스템을 포함한 하드웨어가 안정적이고 전력 효율성이 높아야 한다. 또한 지속적으로 생성되는 대량의 진동 신호들을 사람의 개입을 최소화하며 안정적으로 분석할 수 있는 자율모니터링 시스템이 요구된다. 본 연구에서는 IoT를 활용한 도메인 지식 기반 자율 모니터링 시스템을 개발하였다. 케이블 자율 모니터링 시스템을 구현하기 위한 가장 중요한 요소는 케이블의 장력과 감쇠비의 추정을 위한 진동 신호의 주파수 영역 내 발생하는 첨두의 자동 추정이다. 본 연구에서는 도메인 지식 기반 첨두 자동 추정 알고리즘을 데이터 수집 및 On-Board Processing이 가능한 IoT 시스템에 내장하여 IoT 센서 단에서 Edge computing이 가능한 효율적인 IoT 자율 모니터링 시스템을 구현하였다. 개발된 자율 모니터링 시스템을 국내 사장교에 설치하여 장기간 현장 운영 성능을 평가하였으며, 그 결과 장기 데이터 수신률, 장력 추정의 정확성, 효율성 측면에서 기존 시스템과 비교하여 작동 성능을 확인하고 검증하였다.

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.97-104
• /
• 2015

Compared with a strong axial rigidity due to large intial tension, cable has a weak laterally flexural rigidity. A variety of dynamic loads such as traffic loads and wind loads etc. cause the cables to vibrate significantly and affect the mechanical properties and the performance of cables. Therefore, vibration reduction design is an urgent task to control the vibration of cable-supported bridges. Because a various kind of dampers have shown to reduce the amplitude and duration time of vibration of cable from measured date in field test, damper can be considered that it is effective device significantly to reduce the amplitude and duration time in vibration of cable. Vibration characteristics of cable can change according to manufacturing method and type of established form, and damper has been designed according to distribution of natural frequencies and vibration modes. In this study, numerical analysis is used to show the reduction effects of vibrations and present the design of damper for vibration reduction of cable.

• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.653-667
• /
• 2019

Using cross-ties to connect cables together when forming a cable network is regarded as an efficient method of mitigating cable vibrations. Cross-ties have been extended and fixed on bridge decks or towers in some engineering applications. However, the dynamics of this kind of system need to be further studied, and the effects of extending cross-links to bridge decks/towers on the modal response of the system should be assessed in detail. In this paper, a system of two cables connected by an inter-supported cross-link with another lower cross-link extended to the ground is proposed and analyzed. The characteristic equation of the system is derived, and some limiting solutions in closed form of the system are derived. Roots of cable system with special configurations are also discussed, attention being given to the case when the two cables are identical. A predictable mode behavior was found when the stiffness of inter-connection cross-link and the cross-link extended to the ground were the same. The vector of mode energy distribution and the degree of mode localization index are proposed so as to distinguish global and local modes. The change of mode behaviors is further discussed in the case when the two cables are not identical. Effects of cross-link stiffness, cross-link location, mass-tension ratio, cable length ratio and frequency ratio on $1^{st}$ mode frequency and mode shape are addressed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권2호
• /
• pp.54-61
• /
• 2013

사장교 케이블은 초기 큰 인장력으로 축강성이 매우 크지만, 횡방향 휨강성은 약하다. 풍하중이나 교통하중은 케이블을 심각하게 진동시켜 사장교의 사용성에 부정적 영향을 끼친다. 그러므로 장대교량에 감쇠장치를 설치하는 진동 저감 계획이 절실히 요구된다. 마찰댐퍼는 교통하중이나 풍하중과 같은 동적하중이 작용하는 케이블 진동에서 진폭과 지속시간을 대폭 감소시킬 수 있는 효과적인 장치임을 알 수 있다. 케이블 진동은 댐퍼제작방법과 설치위치 및 형상에 따라 효율이 달라질 수 있다. 그럼에도 불구하고 본 실험연구의 마찰댐퍼 설치전 후 제진성능효과 분석결과는 향후 사장케이블의 진동을 저감시키는 기본 자료로 활용할 수 있다.

• Smart Structures and Systems
• /
• 제11권4호
• /
• pp.411-433
• /
• 2013

Due to its easy operation and wide applicability, the ambient vibration method is commonly adopted to determine the cable force by first identifying the cable frequencies from the vibration signals. With given vibration length and flexural rigidity, an analytical or empirical formula is then used with these cable frequencies to calculate the cable force. It is, however, usually difficult to decide the two required parameters, especially the vibration length due to uncertain boundary constraints. To tackle this problem, a new concept of combining the modal frequencies and mode shape ratios is fully explored in this study for developing an accurate method merely based on ambient vibration measurements. A simply supported beam model with an axial tension is adopted and the effective vibration length of cable is then independently determined based on the mode shape ratios identified from the synchronized measurements. With the effective vibration length obtained and the identified modal frequencies, the cable force and flexural rigidity can then be solved using simple linear regression techniques. The feasibility and accuracy of the proposed method is extensively verified with demonstrative numerical examples and actual applications to different cable-stayed bridges. Furthermore, several important issues in engineering practice such as the number of sensors and selection of modes are also thoroughly investigated.