This study was carried out to obtain basic data on the kinds of aquatic insects and their living conditions in the mountain stream. The investigation was done in Bongmyung stream. Experimental Forest, Kangwon National University on aquatic insects, anions and river-bed materials. The results are as follows. 1. At every plot surveyed, diversity index, richness index and evenness index of aquatic insects appeared higher at upper stream than at lower stream in erosion control dam. 2. Anion concentrations were almost the same in plots A, B, C, D and E, but plot F at the lower stream showed 1.5 to 89 times higher concentration than the others. 3. In river-bed materials analysed, particle diameter was bigger at the upper stream than at the lower stream. At the down stream of erosion control dam showed high pebble composition ratio. 4. The number of aquatic insects showed the negative relation with the anion concentration and the positive one with the size of river-bed materials. Especially, they were affected much by the distribution chart of boulder.
This paper presents a technique to implement embedded systems using interrupts of the one-chip microcontroller with many peripherals based on a multiple finite state machines model. The multiple finite state machine model utilizes the structure of FSMD used for hardware design and the features of flow control by interrupts. The main finite state machine corresponds to the main program and the sub-state machines corresponds to the interrupt subroutines. Therefore, interrupts from the peripherals can be processed immediately in the sub-state machines. The request and reply variables are used to interface between the finite state machines. Additional operating system is not necessary for the context switching between the main state machine and the sub-state machine, because the flow-control caused by interrupt can be replaced with the switching. An embedded system modeled on multiple finite state machine with ASM charts can be easily implemented by the conversion of ASM charts into C-language programs. This implementation technique can be easily adopted to the hardware oriented embedded systems because of the detail description of the model and the fast response to the interrupt events in the sub-state machine.
Hur, Yong Soo;Ryu, Eun Kyung;Yoon, San Hyun;Lim, Kyung Sil;Lee, Won Don;Lim, Jin Ho
Clinical and Experimental Reproductive Medicine
/
v.43
no.3
/
pp.146-151
/
2016
Objective: This study was conducted to compare the effects of static culture, dynamic culture, and the combination of dynamic culture with specialized surfaces involving co-culture on human embryonic development. Embryos cultured using conventional static culture (SC) techniques served as a control group. We compared dynamic culture using micro-vibration culture (MVC) and micro-vibration with co-culture (MCoC), in which autologous cumulus cells were used as a specialized surface. Methods: We conducted a chart review of patients who were treated between January 2011 and November 2014 in order to compare embryonic development rates and pregnancy rates among the groups. Zygotes were cultured in micro-droplets, and embryos were subsequently selected for transfer. Some surplus embryos were cryopreserved, and the others were cultured for blastocyst development. A micro-vibrator was set at the frequency of 42 Hz for duration of 5 seconds per 60 minutes to facilitate embryo development. Results: No significant differences among the groups were present in patient's characteristics. However, the clinical pregnancy rates were significantly higher in the MVC group and the MCoC group than in the SC group. No significant differences were found in the blastocyst development rate between the SC group and the MVC group, but the blastocyst development rate in the MCoC group was significantly higher than in the SC and MVC groups. Conclusion: The clinical pregnancy rate was significantly increased by the application of micro-vibration to the embryonic cultures of poor responders. The blastocyst development rate was significantly increased by the application of MCoC to surplus embryos.
Based on monitoring data collected from the Nanjing Dashengguan Bridge over the last five years, this paper systematically investigates the effects of temperature field and train loadings on the structural responses of this long-span high-speed railway bridge, and establishes the early warning thresholds for various structural responses. Then, some lessons drawn from the structural health monitoring system of this bridge are summarized. The main context includes: (1) Polynomial regression models are established for monitoring temperature effects on modal frequencies of the main girder and hangers, longitudinal displacements of the bearings, and static strains of the truss members; (2) The correlation between structural vibration accelerations and train speeds is investigated, focusing on the resonance characteristics of the bridge at the specific train speeds; (3) With regard to various static and dynamic responses of the bridge, early warning thresholds are established by using mean control chart analysis and probabilistic analysis; (4) Two lessons are drawn from the experiences in the bridge operation, which involves the lacks of the health monitoring for telescopic devices on the beam-end and bolt fractures in key members of the main truss.
Journal of Elementary Mathematics Education in Korea
/
v.11
no.2
/
pp.177-197
/
2007
This study discussed the climbing learning method which studied and practiced by Professor Saito Noboru. This is the learning method which is devised to know not only the relationship of the learning factors but the systemic or structural connection of whole studying contents- affects children's math learning ability through practical class to both the lower and the higher grades. To achieve the purpose of this study, these following issues were set; A. Develop the teaching and learning course of mathematics by applying the climbing learning method. B. Execute the mathematics lesson according to the climbing learning method and analyze the learning achievement. C. Analyze the difference between application of the climbing learning method and that of the learning method by student's level in mathematics. D. Analyze what the climbing learning method gives a shift of the recognition of learning mathematics. In order to accomplish these study issues, we analyzed the text book of math not only for children but also for teachers and developed the teaching and learning course applied the climbing learning method with advice of experts. It was chosen two different homogeneous groups each, third year for lower grade group and fifth year for higher grade group. It was done the experimental group lesson applying the climbing learning method and general lesson for the control group. After then, t-test against independent samples was done depending on the result of the student's assessment(T1, T2). These two groups' students were divided into smaller groups based on result of achievement level regardless of gender. These subgroups were confirmed the difference of learning ability between upper and lower level group. As regarding the result making out grades of faith and attitude for math, t-test was used on independent sample. At the same time, experimental groups were tested using learning attitude with the learning structure chart. Through this study the following results are obtained and the conclusion was drawn. Firstly, although applying the climbing learning method to the lesson does not have significant effect to the lower grade of elementary school student's achievement it has significant influence on the higher grade student's achievement. Second, as a result of analyzing the difference between the climbing learning method and the learning method by student's level in mathematics, it is of no beneficial effect to the lower grade both upper level and lower level. However, it has appreciable effect to the higher grade classes both upper level and low level. Especially, upper level students have higher effect than low level students. Third, climbing learning method does not affect to the faith and attitude of the lower grade students positively, but it has affirmative effect to the higher grade students'. As a result of the survey of the experimental groups which were applied to the climbing loaming method, the lesson by using the learning structure chart proved to be helpful to the both the lower and higher grade. The best advantage of using the learning structure chart, children say, is easily understood whole contents of studying and is useful for review. Furthermore, using the learning structure chart is more efficient compared with previous learning method and is given the successful result to self-directed learning. In conclusion, keeping up with the current of the thought of education, we suggest a scheme as a new teaching method from the constructive learning method which emphasize the self-directed learning.
Park, Sung-Chan;Ahn, Se-Yeol;Park, Seong-Soo;Koo, Myoung-Wan
Proceedings of the KSPS conference
/
2007.05a
/
pp.41-44
/
2007
In this paper, we introduce a system in which car navigation scenario is plugged multimodal interface based on multimodal middleware. In map-based system, the combination of speech and pen input/output modalities can offer users better expressive power. To be able to achieve multimodal task in car environments, we have chosen SCXML(State Chart XML), a multimodal authoring language of W3C standard, to control modality components as XHTML, VoiceXML and GPS. In Network Manager, GPS signals from navigation software are converted to EMMA meta language, sent to MultiModal Interaction Runtime Framework(MMI). Not only does MMI handles GPS signals and a user's multimodal I/Os but also it combines them with information of device, user preference and reasoned RDF to give the user intelligent or personalized services. The self-simulation test has shown that middleware accomplish a navigational multimodal task over multiple users in car environments.
The cooling effect of a fog cooling system has a close relationship to air flow and relative humidity in the greenhouse. From the VETH chart for cooling design, a cooling efficiency can be improved by means of increasing the air exchange rate and the amount of sprayed water. In the no shading experimental greenhouse by time control, when average air exchange rate was 0.77 times.min$^{-1}$ and spray water amount was 2,009g, inside temperature of the greenhouse was 31$^{\circ}C$ that was almost close to outside temperature and cooling efficiency was 82%. When average air exchange rate was close to temperature of the greenhouse that was no cooling and 70% shading greenhouse environment. When average air exchange rate was 2.59times.min$^{-1}$ , spray water amount was 2,009g and shading rate was 70%, inside relative humidity of the greenhouse was increased was 2,009 g and shading rate was 70%, inside relative humidity of the greenhouse was increased, but temperature was not decreased. When average air exchange rate was 2.33 times.min$^{-1}$ and spray water amount was 2,009g, inside temperature was 31.4 and at that time maximum wind speed at the air inlet of greenhouse was 1.9m.s$^{-1}$ . Since time controller sprayed amount of constant water at a given interval, some of sprayed water remained not to be evaporated, which increased relative humidity and decreased cooling efficiency. Because the shading screen prevented air flow in the greenhouse, it also caused the evaporation efficiency to be decreased. In order to increase cooling efficiency, it was necessary to study on controling by relative humidity and air circulation in the greenhouse.
Hwang, Young-Jae;Kim, Nayoung;Yun, Chang Yong;Yoon, Hyuk;Shin, Cheol Min;Park, Young Soo;Son, Il Tae;Oh, Heung-Kwon;Kim, Duck-Woo;Kang, Sung-Bum;Lee, Hye Seung;Park, Seon Mee;Lee, Dong Ho
Journal of Cancer Prevention
/
v.23
no.4
/
pp.183-190
/
2018
Background: As the number of big-cohort studies increases, validation becomes increasingly more important. We aimed to validate administrative database categorized as colorectal cancer (CRC) by the International Classification of Disease (ICD) 10th code. Methods: Big-cohort was collected from Clinical Data Warehouse using ICD 10th codes from May 1, 2003 to November 30, 2016 at Seoul National University Bundang Hospital. The patients in the study group had been diagnosed with cancer and were recorded in the ICD 10th code of CRC by the National Health Insurance Service. Subjects with codes of inflammatory bowel disease or tuberculosis colitis were selected for the control group. For the accuracy of registered CRC codes (C18-21), the chart, imaging results, and pathologic findings were examined by two reviewers. Sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) for CRC were calculated. Results: A total of 6,780 subjects with CRC and 1,899 control subjects were enrolled. Of these patients, 22 subjects did not have evidence of CRC by colonoscopy, computed tomography, magnetic resonance imaging, or positron emission tomography. The sensitivity and specificity of hospitalization data for identifying CRC were 100.00% and 98.86%, respectively. PPV and NPV were 99.68% and 100.00%, respectively. Conclusions: The big-cohort database using the ICD 10th code for CRC appears to be accurate.
Purpose: This study aimed to evaluate the differences between clinical and quantitative sensory testing (QST) results among persistent idiopathic dentoalveolar pain (PIDP), inflammatory dental pain, and control group subjects to identify discriminative clinical features for differential diagnosis. Methods: Thirty-three patients (5 PIDP-a without surgical procedures 10 PIDP-b with surgical procedures, 8 dental pain patients, and 10 controls) were evaluated for clinical features and QST results. Cold pain threshold, heat pain threshold, mechanical pain threshold (MPT), mechanical pain sensitivity, and pressure pain threshold (PPT) were performed. Psychological factors were assessed using Symptom Checklist-90-Revision (SCL-90-R) and a chart review was conducted to evaluate additional discriminative clinical features such as pain quality and treatment prognosis. Results: The dental pain group had lower PPT than the PIDP-b and the control group. The PIDP-a group showed higher MPT and PPT than the PIDP-b and dental pain group but the difference was not statistically significant. Differences in SCL-90-R SOM (Somatization), O-C (obsessive-compulsive), ANX (anxiety), and PSY (Psychoticism) values were statistically significant among groups. PIDP-a and PIDP-b groups showed remaining symptoms after treatment and the pain tended to spread widely, whereas, in toothache patients, symptoms disappeared after treatment. However, factors that confound the diagnosis, such as an increase in pain during chewing and a decrease in the pain threshold at the affected site, could also be identified. Conclusions: PIDP and dental pain groups have distinct clinical symptoms, but there are also factors that cause confusing in diagnosis. Therefore, various clinical examination results should be carefully reviewed and comprehensively evaluated in the differential diagnosis process.
Kim, Chong-Kook;Min, Mi-Hong;Min, Kyoung-Hee;Lah, Woon-Ryong;Lee, Bong-Jin;Kim, Yang-Bae
YAKHAK HOEJI
/
v.36
no.2
/
pp.159-166
/
1992
A neoglycolipid, N-stearyl lactobionamide(N-SLBA) was synthesized and the incorporation of the neoglycolipid into liposomes was achieved in order to prepare neo-galactosylated liposome as potential drug carrier for active targeting to galactose receptor existing cell and tissue. N-SLBA was synthesized by the covalent linkage between carboxyl group of lactobionic acid and amino group of stearylamine(SA). The yield of N-SLBA was about 52.3%. It was identified with $1650\;cm^{-1}$ in IR chart, 7.5 ppm in NMR spectra, $61^{\circ}C$ endothermic peak in DSC heating curve. Surface-modified large unilamellar vesicle with galactose(N-SLBA-LUV) could be prepared with N-SLBA by reverse evaporation method. N-SLBA-LUV was identified by TEM and measuring of membrane function. The maximum amount of N-SLBA incorporated into liposome is up to about 15 mol%. Compared with control liposome (SA-LUV), N-SLBA-LUV showed lower encapsulation efficiency of MTX. It might due to the loss of positive surface charge of stearylamine. N-SLBA-LUV was similar to SA-LUV in aspect of osmotic behavior. N-SLBA-LUV prepared with N-SLBA would be expected to be a good carrier for active targeting to galactose receptor existing cell and tissue.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.