• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.1
• /
• pp.20-26
• /
• 2013

Objectives: This study was conducted to evaluate the health risk of workers exposed to butyl glycidyl ether to prevent them from developing occupational diseases. Methods: The workplaces that coat floor with epoxy were selected and the samples were collected and analyzed with NIOSH 1616 Method. We calculate workplace reference concentration using with NOAEL estimated by the study of Anderson et al. in 1978. Risk was calculated by the ratio of exposure to workplace reference concentration. Monte-Carlo simulation was performed to derivate the median, cumulative 90%, and cumulative 95% value by using Crystal Ball. Results: Butyl glycidyl ether is a skin, eye irritator and can result in central nervous system depression, allergic reaction. NOAEL was 38 ppm and workplace reference concentration was calculated as 0.73 ppm corrected with uncertainty factors. Geometric mean was 1.152 ppm and geometric standard deviation was 1.522 by the workplace environment measurement. The median, cumulative 90%, and cumulative 95% value of risk were calculated as 1.617, 1.934, and 2.092, respectively. Conclusions: Not only cumulative 90% and cumulative 95% value but also the median of risk is higher than 1.0 by the risk characterization, so it can do a lot of harm to workers. Therefore, the process of derivating workplace reference concentration and the appropriacy of the uncertainty factors should be re-examined.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.469-476
• /
• 2008

The synthesis of cyclic carbonate from butyl glycidyl ether (BGE) and carbon dioxide was performed in the presence of three different types of ionic liquid : quarternary ammonium salt, alkyl pyridinium salt, and alkylimidazolium salt. Ionic liquids of different alkyl groups ($C_3$, $C_4$, $C_6$ and $C_8$) and anions ($Cl^-$, $Br^-$ and $I^-$) were used for the reaction which was carried out in a batch autoclave reactor at $60{\sim}120^{\circ}C$. The catalytic activity was increased with increasing alkyl chain length in the order of $C_3$ < $C_4$ < $C_6$. But the ionic liquid with longer alkyl chain length ($C_8$) decreased the conversion of BGE because it is too bulky to form an intermediate with BGE. For the counter anion of the ionic liquid catalysts, the BGE conversion decreased in the order $Cl^-$ > $Br^-$ > $I^-$.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1030-1035
• /
• 1994

Curing behavior and glass transition temperatures of epoxy resins into which reactive diluents were added to control processability were investigated. Heat of cure generated of the epoxy resin was reduced with butyl glycidyl ether(BGE) and phenyl glycidyl ether(PGE) contents. $T_g$ of the resin was decreased with the amount of reactive diluents and it was attributed to increased molecular weight between crosslink points. Cure kinetics of the resins was studied employing autocatalytic reaction model and found that reaction constants decreased as the contents of reactive diluent was increased.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.256-262
• /
• 2010

Dispersion polymerization of methyl acrylate, ethyl acrylate, butyl acrylate, and glycidyl methacrylate were performed in supercritical $CO_2$ at $80\;^{\circ}C$ and 346 bar. Glycidyl methacrylate linked poly(dimethylsiloxane) (GMS-PDMS) surfactant, which was prepared by linking glycidyl methacrylate to monoglycidyl ether terminated PDMS with amino-propyltriethoxysilane, was used as surfactant for the dispersion polymerization in $CO_2$. The yield of the poly(alkyl acrylate) polymers, synthesized in $CO_2$ medium, decreased as the alkyl tail of the acrylate monomers increased. Poly(glycidyl methacrylate) and poly(methyl acrylate) were produced in bead form whereas poly(ethyl acrylate) and poly(butyl acrylate) were viscous liquid. The poly(glycidyl methacrylate) particles had a number average diameter of 2.45 ${\mu}m$ and monodisperse distribution. The poly(methyl acrylate) had a number average diameter of 0.52 ${\mu}m$ and the particle size distribution was bimodal. The glass transition temperatures ($T_g$) of the poly(glycidyl methacrylate) and the poly(alkyl acrylate) products were 4~9 K higher than the $T_g$ of the corresponding acrylate polymers synthesized in conventional processes.

• Clean Technology
• /
• v.14 no.3
• /
• pp.166-170
• /
• 2008

In this study, imidazolium salt ionic liquid on amorphous silica was prepared and its catalytic performance in the cycloaddition of $CO_2$ with allyl glycidyl ether (AGE) to produce heterocyclic carbonate was investigated. The ionic liquid was generated on chloropropyl functionalized silica through the immobilization of imidazole. The prepared catalyst was characterized using a number of instrumental analysis including XRD, BET, $^{29}Si$ MAS-NMR and SEM. $^{29}Si$ MAS-NMR showed that the ionic liquid formed adduct with the chloropropyl groups attached to the silica surface. The immobilized ionic liquid showed very good catalytic activity for the cycloaddition of $CO_2$ with AGE, showing 55-61% of AGE conversion with over 85% of the carbonate selectivity at $80-120^{\circ}C$. Its AGE conversion and selectivity to the carbonate were even higher than the homogeneous analog, 1-n-butyl-3-methyl imidazolium bromide (BMImBr).

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.490-494
• /
• 2016

This paper describes the very efficient and highly enantioselective ring opening of terminal epoxides with alkyl and arene sulfonic acid. The dinuclear chiral (salen) Co complexes bearing Lewis acids of Al, Ga and In catalyze the reaction enantioselectively in the presence of tetrabutylammonium chloride using tert-butyl methyl ether as a solvent. The variation of the anion of the tetra butyl ammonium salt has significant impact on the reactivity and selectivity of the asymmetric ring opening of phenyl glycidyl ether with p-toluenesulfonic acid. The order of reactivity and selectivity was found to be $Cl^-$ > $l^-$ > $Br^-$ > $OH^-$. Strong synergistic effects of the different Lewis acid centers of Co-Al, Co-Ga and Co-In complexes were observed in the catalytic process. The dinuclear chiral salen catalyst containing $AlCl_3$ was found to be most active and highly enantioselective (91% ee).

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.35-40
• /
• 2004

The formation mechanism of void defect which deteriorate composite's property is various according to each composite process. In this paper, void formation and growth mechanism is analyzed by thermal analysis and GC/MS. We made a vacuum chamber for observing pressure effect. Thermal analysis has been done in various condition. Elements of volatiles during resin curing were turned out by GC/MS. The most of volatiles of polyester were composed of styrene (over 80%) and a small quantity of toluene. In case epoxy resin, butyl glycidyl ether was the main element of volatiles (over 90%). We concluded that the original sites of void growth existed in resin and they were eliminated by vacuum and heating process. And the growth of void was influenced by water, diluents, solvent, and reactants in resin.