• 제목/요약/키워드: burst error

검색결과 169건 처리시간 0.023초

컨볼루션 코딩 OFDM 시스템의 성능 분석 (Performance Evaluation of Convolution Coding OFDM Systems)

  • 최승국
    • 한국정보통신학회논문지
    • /
    • 제17권2호
    • /
    • pp.294-301
    • /
    • 2013
  • OFDM 전송방식에서는 여러 개의 부반송파를 사용하여 데이터를 전송한다. 그러므로 송신 비선형 전력증폭기와 반송파 주파수편차에 의한 부반송파 간 간섭으로 인하여 수신기에서 비트 오류율이 증가된다. 무선 다중경로 페이딩 전송채널에서는 여러 개의 OFDM 부반송파 주파수 구간동안 연속적으로 전송이득이 작은 구간이 존재하므로, 전송 시 연집에러가 발생되어, 데이터 재생 시 비트 오류율이 증가 된다. 이러한 연집에러에 의한 비트 오류율의 감소에는 인터리버와 컨볼루션 에러제어코딩이 효과적이다. 한편 파일럿 심볼을 이용하여 전송채널을 추정하는 현 시스템에서는 전송채널 추정에러로 인하여 역시 비트 오류율이 증가된다. 그러므로 본 논문에서는 비선형 전력증폭기, 반송파 주파수편차 및 채널추정에러의 영향을 고려하여, 송신 신호가 다중경로 페이딩 채널을 통하여 전송될 때, 인터리버와 컨볼루션 코딩을 이용하는 OFDM 시스템의 데이터 비트 오류율 성능을 분석한다.

무선랜 인터넷 지역 방송에서 복수전송과 인터리빙 효과 연구 (A Study on the Effect of Redundant Transmission and Interleaving for WLAN Internet Local Broadcasting)

  • 오종택
    • 한국인터넷방송통신학회논문지
    • /
    • 제12권6호
    • /
    • pp.43-48
    • /
    • 2012
  • 무선랜과 스마트폰 등의 무선랜 기능을 내장한 단말기기가 활성화됨에 따라 무선 인터넷 지역 방송 서비스의 중요성이 커지고 있다. 이 경우 다수의 단말기에 방송 데이터를 전송하기 위해서는 단방향 방송기술이 사용되어야 하며, 데이터의 재전송이 불가하므로 방송 데이터의 수신 오류가 매우 커지는 문제가 있다. 또한 무선랜은 비허가 주파수를 사용하므로 타 무선기기에 의한 간섭으로 버스트 오류가 발생하는 속성이 있다. 본 논문에서는 버스트 오류와 랜덤 오류를 극복하기 위한 방법을 도입하고 그 효과를 분석하였다.

전력선에서의 에러 정정 코드에 의한 데이터 전송 성능 분석 (Analysis of Performance of Data Communications Using Error Control Codes on Electrical Power Lines)

  • 송왕철;정호영;김신령;강창언
    • 전자공학회논문지A
    • /
    • 제28A권5호
    • /
    • pp.339-346
    • /
    • 1991
  • In this paper the performance of communication system in the electrical power line using error correcting codes is analysed. The BCH codes and interleaved code are to be used for correcting burst and random errors in the power line channels. The data rate of 2400 bps and the carrier frequency of 12KHz are assumed. Actual power line noise is recorded and simulated in the BPSK PLC system model.

  • PDF

LOW-DENSITY CLOSE-CLOSED LOOP BURST ERROR DETECTING CODES

  • Dass, Bal-Kishan;Jain, Sapna
    • Journal of applied mathematics & informatics
    • /
    • 제9권1호
    • /
    • pp.231-238
    • /
    • 2002
  • In this paper, we study cyclic codes detecting a subclass of close-closed loop bursts viz. low-density close-closed loop bursts. A subclass of CT close-closed loop berets called CT low-density close-closed loop bursts is also studied.

Sensor Utility Network를 위한 저전력 Burst 클록-데이터 복원 회로를 포함한 클록 시스템 (A Clock System including Low-power Burst Clock-data Recovery Circuit for Sensor Utility Network)

  • 송창민;서재훈;장영찬
    • 전기전자학회논문지
    • /
    • 제23권3호
    • /
    • pp.858-864
    • /
    • 2019
  • 본 논문에서는 센서 유틸리티 네트워크에서 센서 노드들 사이의 주파수 차이로 인한 데이터 손실을 제거하기 위한 클록 시스템이 제안된다. 각 센서 노드를 위한 제안된 클록 시스템은 버스트 클록-데이터 복원 회로, 32-위상 클록을 출력하는 디지털 위상 고정 루프, 그리고 프로그래밍 가능한 개방형 루프 분수 분할기를 사용하는 디지털 주파수 합성기로 구성된다. 첫번째 센서 노드에는 버스트 클록-데이터 복원 회로 대신 능동 인덕터를 사용하는 CMOS 발진기가 사용된다. 제안된 클록 시스템은 1.2 V 공급 전압을 이용하는 65nm CMOS 공정에서 설계된다. 센서 노드들 사이의 주파수 오류가 1%일 때, 제안하는 버스트 클록-데이터 복원 회로는 기준 클록으로 5Mbps 데이터 속도에 대해 64배 체배된 주파수를 가짐으로 4.95 ns의 시간지터를 가진다. 설계된 디지털 주파수 합성기의 주파수 변경은 100 kHz에서 320 MHz의 주파수 범위에서 출력 클록의 한 주기 내에 수행된다.

An Efficient Error Detection Technique for 3D Bit-Partitioned SRAM Devices

  • Yoon, Heung Sun;Park, Jong Kang;Kim, Jong Tae
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권5호
    • /
    • pp.445-454
    • /
    • 2015
  • As the feature sizes and the operating charges continue to be scaled down, multi-bit soft errors are becoming more critical in SRAM designs of a few nanometers. In this paper, we propose an efficient error detection technique to reduce the size of parity bits by applying a 2D bit-interleaving technique to 3D bit-partitioned SRAM devices. Our proposed bit-interleaving technique uses only 1/K (where K is the number of dies) parity bits, compared with conventional bit-interleaving structures. Our simulation results show that 1/K parity bits are needed with only a 0.024-0.036% detection error increased over that of the existing bit-interleaving method. It is also possible for our technique to improve the burst error coverage, by adding more parity bits.

VHF Digital Link 모드 3 시스템의 성능 평가 (Performance Evaluation of VHF Digital Link Mode 3 System)

  • 배중원;남기욱;곽재민;박기식;조성언
    • 한국항행학회논문지
    • /
    • 제9권2호
    • /
    • pp.156-163
    • /
    • 2005
  • 본 논문에서는 ICAO (International Civil Aviation Organization)에서 규정한 VDL 모드 3 시스템 계통도와 제원을 구성하여 BER(Bit Error Rate), 전송지연시간, 버스트 재전송율, 그리고 throughput에 대한 성능을 분석하였다. 성능 분석 결과, BER과 전송지연시간, throughput, 버스트 재전송율의 관계를 명확히 정의할 수 있었고, 또한 down link에서 V/D 재전송율과 throughput에 강한 상관이 있음이 판명되었다.

  • PDF

Unequal Error Protection and Error Concealment Schemes for the Transmission of H.263 Video over Mobile Channels

  • 홍원기;고성재
    • 전기전자학회논문지
    • /
    • 제2권2호
    • /
    • pp.285-293
    • /
    • 1998
  • This paper presents unequal error protection and error concealment techniques far robust H.263 video transmission over mobile channels. The proposed error protection scheme has three major features. First, it has the capability of preventing the loss of synchronization information in H.263 video stream as much as possible that the H.263 decoder can resynchronize at the next decoding point, if errors are occurred. Secondly, it employs an unequal error protection scheme to support variable coding rates using rate compatible punctured convolutional (RCPC) codes, dividing the encoded stream into two classes. Finally, a macroblock-interleaving scheme is employed in order to minimize the corruption of consecutive macroblocks due to burst errors, which can make a proper condition for error concealment. In addition, to minimize the spatial error propagations due to the variable length codes, a fast resynchronization scheme at the group of block layer is developed for recovering subsequent error-free macroblocks following the damaged macroblock. futhermore, error concealment techniques based on both side match criterion and overlapped block motion compensation (OBMC) are employed at the source decoder so that it can not only recover the lost macroblock more accurately, but also reduce blocking artifacts. Experimental results show that the proposed scheme can be an effective error protection scheme since proper video quality can be maintained under various channel bit error rates.

  • PDF

길쌈 부호 복원 기법을 이용한 블라인드 블록 디인터리빙 (Blind Block Deinterleaving using Convolutional Code Reconstruction Method)

  • 정진우;윤동원;박철순;윤상범;이상현
    • 대한전자공학회논문지TC
    • /
    • 제48권9호
    • /
    • pp.10-16
    • /
    • 2011
  • 채널 부호화된 심볼은 연집 오류(Burst error)에 취약한 특성으로 인해 송신단에서 인터리빙 과정을 거쳐 송신된다. 수신단에서는 채널을 통하여 발생된 연집 오류를 디인터리빙 과정을 통해 랜덤 오류(Random error)로 변화시키고 채널 복호화를 통하여 오류 정정 효과를 높인다. 그러나 수신단에서 송신단의 인터리버 파라미터를 알지 못하는 경우에는 인터리빙은 특정 패턴에 의한 일종의 암호화로 볼 수 있으며 디인터리빙이 어렵게 된다. 최근 선형 블록 부호가 블록 인터리빙 되었을 때 선형 블록 부호의 선형성을 이용하여 인터리버 파라미터를 추정하는 기법들의 연구가 진행되었다. 그러나 길쌈 부호가 인터리빙 되었을 때, 선형 블록 부호와 달리 부호어 길이에 따라 구분되는 선형성을 이용할 수 없기 때문에 기존 선형 블록 부호의 선형성을 이용한 방법으로는 인터리버의 파라미터를 추정할 수 없다. 본 논문에서는 길쌈부호가 블록 인터리빙이 되었을 때 길쌈 부호 복원(Convolutional code reconstruction) 기법을 이용하여 블록 인터리버의 행과 열을 추정하는 블라인드 블록 디인터리빙 기법을 제안한다.

인터리버를 이용한 eHDR-WPAN 시스템의 성능 분석 (Performance Analysis of eHDR-WPAN System Using Interleaver)

  • 정승희;이현재;오창헌
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 춘계종합학술대회
    • /
    • pp.788-791
    • /
    • 2005
  • 본 논문에서는 110Mbps의 전송속도를 가지는 eHDR-WPAN( enhanced High Data Rate-Wireless Personal Area Networks)시스템의 성능향상 방안으로 인터리버를 적용하였다. 실내무선채널에서 발생하는 페이딩 현상은 연집화 오류 성향을 증가시킨다. 그러므로 인터리빙 기법을 이용하여 오류의 연집화 성향을 산발화 시킴으로써 시스템의 오류성능을 개선 할 수 있다. 본 논문에서는 컨볼루셔널, 블록, 랜덤 인터리버를 적용하였으며, 심벌 간 거리를 9와 27로 설정하였다. 블록 인터리버의 경우, 10$^{-4}$에서 약 0.6dB 정도 E$_b$/N$_o$의 성능향상을 보였다. 그러므로 eHDR-WPAN 시스템에서는 심벌 간 거리가 9인 블록인터리버가 최적의 인터리버임을 확인하였다.

  • PDF