• 펄프종이기술
• /
• 제39권5호
• /
• pp.7-11
• /
• 2007

Kraft pulping of Trema orientalis (Nalita) was studied in order to find kinetic data for delignification. Pulping runs were carried out in the temperature range of $160-180\;^{\circ}C$ under constant and well-defined conditions. The delignification was found to be first order with respect to residual lignin and was chemically controlled. The rate of delignification reaction was increased 1.11-1.23 for $10\;^{\circ}C$ temperature increase in the range of $160-180\;^{\circ}C$ range. A mean value of 93% of lignin was removed at the transition between bulk and residual delignification. The influence of cooking temperature on the rate constant was expressed by an Arrhenius-type equation. The obtained activation energy of the delignification reaction was 6,164 cal/mol. The transition point between bulk and residual phase was shifted to lower lignin and carbohydrate yield with the increase of temperature.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.86-93
• /
• 1995

Linwidth enhancement factor .alpha., linwidth, chirping and differential gain characteristics were measured and compared for each DFB-LDs containing active layers composed of bulk, MQW, and S-MQW, respectively. .alpha. of 6, 4 and 3.2 and chirping measured under 2.5Gbps modulation of 1.29nm, 0.67nm and 0.48nm were given for DFB-LDs of bulk, MQW and S-MQW active layers, respectively. And S-MQW has the largest differential gin of 2.4*10$^{-15}$ cm$^{2}$ (S-MQW) compared to the of 5.4*10$^{-16}$ cm$^{2}$(bulk) and 8.6*10$^{-16}$ cm$^{2}$(MQW). Linewidth enhancement facter .alpha. of less than 2 is expected with p-type modulation doped S-MQW DFB-LD.

• 한국연초학회지
• /
• 제23권1호
• /
• pp.90-93
• /
• 2001

In order to save hanging labor hours and reduce work intensity for bulk curing of the flue-cured tobacco, and electric hoist was developed. It consists of a pair of square steel frames with side plates and rolling casters to move back and forth on the second tire of bulk barn, and wire rope type lift was attached to the beneath of its top center. The lift driven by DC motor could be controlled by operating switch with one limit switch and control box, and a scissors shaped gripper was deviced to grip tobacco rack to the end of wire rope. As the results of experiments with electric hoist, labor hours for hanging could be saved by 30 to 40% as compared with those in conventional method. With simple and light structure, it was possible for even woman to load the harvested tobacco, and it could be recommended for farmers to use this device with reasonable price.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1658-1660
• /
• 2004

Use of higher voltage and higher capacity of power systems and their equipment is leading to an increase in the size of the entire system. In order to reduce the cost of constructing a substation, it is necessary to reduce the size of equipment. So, this paper described optical sensor, which exploited the electric and magnetic potentiometer to sense the measured voltage and current of medium voltage GIS. It can be used both in measurement and in protection relays as its well linearity, rapid response, broad dynamic range, wide frequency band, no magnetic saturation, small in volume, light weight, and saft in insulation.

• 한국광물학회지
• /
• 제9권1호
• /
• pp.35-42
• /
• 1996

Polycrystalline ZrH2 in tetragonal crystal system has been compressed in a modified Bassett-type diamond anvil cell up to 36.0 GPa at room temperature. X-ray diffraction data did not indicate any phase transitions at the present pressure range. The pressure dependence of the a-axis, c-axis, c/a and molar volume of ZrH2 was determined at pressures up to 36.0 GPa. Assuming the pressure derivative of the bulk modulus (K0') to be 4.11 from an ultrasonic value on Zr, bulk modulus (K0) was determined to be 160Gpa by fitting the pressure-volume data to the Birch-Murnaghan equation of state. Same sample was heated at $500^{\circ}C$ at the pressure of 9.8 GPa in a modified Sung-type diamond anvil cell. Unloaded and quenched sample revealed that the original tetragonal structure transforms into a hexagonal structured phase with a zero-pressure molar volume change of ~115.5%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.855-858
• /
• 2008

Transient current (TC) on bulk-state liquid crystal mixtures was measured. We found that TC is very sensitive to impurities and the features of TC curves depend on the type of contamination, from which the quality of materials can be definitely evaluated and the type of impurities can also be revealed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1924-1926
• /
• 2002

The optical current transformer using Faraday effect is the sensor to measure current that flows in any conductor. This sensor doesn't undergo the magnetic saturation and effect of adjacent conductors. But this senor using bulk-glass sensing clement has crucial drawback. It is impossible that the sensor is mounted to conductor without breaking the closed-loop of light or conductor. So we developed the clamp-type optical current transformer and made an experiment.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1045-1047
• /
• 2006

Fabrication of $Mg_{95.75}Zn_1Y_3Yb_{0.25}$ bulk alloy has been performed through the consolidation of rapidly solidified ribbons. The $Mg_{95.75}Zn_1Y_3Yb_{0.25}$ bulk alloy exhibited excellent mechanical properties, high tensile yield strength of 530 MPa, and large elongation of 3 %. Microstructure of the alloy was characterized by equiaxed fine grains that consist of -Mg, long period ordered (LPO) structure phase, and $Mg_5RE$-type cubic compound. The strengthening of the alloys may be due to fine grains with LPO structure phase and $Mg_5RE$-type compound.

• 센서학회지
• /
• 제21권2호
• /
• pp.121-126
• /
• 2012

Piezoresistive type contact force sensor array is fabricated by (111) Silicon bulk micromachining for continuous blood pressure monitoring. Length and width of the unit sensor structure is $200{\mu}m$ and $190{\mu}m$, respectively. The gap between sensing elements is only $10{\mu}m$. To achieve wafer level packaging, the sensor structure is capped by PDMS soft cap using wafer molding and bonding process with $10{\mu}m$ alignment precision. The resistance change over contact force was measured to verify the feasibility of the proposed sensor scheme. The maximum measurement range and resolution is 900 mm Hg and 0.57 mm Hg, respectively.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.425-428
• /
• 2017

본 논문에서는 진동 에너지를 이용하여 에너지를 수확하는 전파 정류 하베스팅 회로를 설계하였다. 설계된 회로는 저전압에서도 전력효율이 우수하도록 Beta-Multiplier를 이용하여 Body-Bias technique을 Negative Voltage Converter에 적용하였으며, Comparator를 Bulk-Driven type으로 설계하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 설계된 회로의 칩 면적은 $931{\mu}m{\times}785{\mu}m$이다.