• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.20-24
• /
• 1999

The study of HTS(High Temperature Superconducting) bulk in magnetic levitation system requires the calculation of currents distribution in HTS bulk is very important to determine this forces. We have made computer program to find this current distribution and levitation force. J-E relation in HTS bulk is extremely nonlinear, so iteration method must be used to determine the current distribution. We developed the method to determine the current distribution in the unifrom-field model and, using this method, calculated the levitation force in permanent-magnet-levitation model.

• 펄프종이기술
• /
• 제32권2호
• /
• pp.16-25
• /
• 2000

The influence of four process parameters of soft nip calendering including calendering pressure, temperature, moisture content and nip residence time on bulk, smoothness and tensile strength of newsprints has been investigated. In addition, the effect of basis weights on calendering responses has been examined. Bulk of newsprints decreased and smoothness increased with the increase of the calendering pressure, temperature, moisture content of the sheets and nip residence time. Improvement in tensile strength was observed when low calendering pressure and high temperature of heat-ing roll were employed. Tensile strength of the newsprint, however, decreased abruptly when the calendering temperature and pressure increased above certain levels due to the rupture of sheet structure, which has been verified by SEM. SEM micrographs also showed that it would be possible to maintain the inner bulk while densifying the fibers on the outer surface of newsprint by adjusting the soft nip calendering variables properly.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.409-412
• /
• 2006

Bulk metallic glass (BMG) strips of $Cu_{54}Ni_6Zr_{22}Ti_{18}$ were produced by warm rolling of the amorphous powder canned with copper. Controlling of temperatures of the rolled sample and rolls was essential for the successive rolling process. Because improper controlling of the sample temperature gave rise to the crystallization of BMG loading to the catastrophic fracture of BMG strips, the temperature of rolls should be properly controlled for achieving successful powder rolling of BMG. The variations of the strain state and temperature in the roll gap was simulated by the finite element method(FEM) using various roll temperatures.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.7-11
• /
• 2007

Kraft pulping of Trema orientalis (Nalita) was studied in order to find kinetic data for delignification. Pulping runs were carried out in the temperature range of $160-180\;^{\circ}C$ under constant and well-defined conditions. The delignification was found to be first order with respect to residual lignin and was chemically controlled. The rate of delignification reaction was increased 1.11-1.23 for $10\;^{\circ}C$ temperature increase in the range of $160-180\;^{\circ}C$ range. A mean value of 93% of lignin was removed at the transition between bulk and residual delignification. The influence of cooking temperature on the rate constant was expressed by an Arrhenius-type equation. The obtained activation energy of the delignification reaction was 6,164 cal/mol. The transition point between bulk and residual phase was shifted to lower lignin and carbohydrate yield with the increase of temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권2호
• /
• pp.36-43
• /
• 1993

Real quality and axial void fraction distribution of subcooled refrigerant flow is very important to predict the heat transfer rate and pressure drop in the design of refrigerating system. In the subcooled boiling region, the liquid bulk temperature is still below the corresponding saturation temperature. But beyond the net vapor generation point, bubble detachment is occured actively from the vapor layer formed on the wall. A reliable method to predict the vapor fraction from the liquid bulk temperature is suggested in this paper. And also the actual quality of the subcooled R-113 flow is calculated in the range of 261-1239kg/$m^2$s mass velocity and 10-30K subcooling.

• Applied Science and Convergence Technology
• /
• 제23권3호
• /
• pp.113-127
• /
• 2014

For more than five decades, silicon has dominated the semiconductor industry that supports memory devices, ICs, photovoltaic devices, etc. Photoluminescence (PL) is an attractive silicon characterization technique because it is contactless and provides information on bulk impurities, defects, surface states, optical properties, and doping concentration. It can provide high resolution spectra, generally with the sample at low temperature and room-temperature spectra. The photoluminescence properties of silicon at low temperature are reviewed and discussed in this study. In this paper, silicon bulk PL spectra are shown in multiple peak positions at low temperature. They correspond with various impurities such as In, Al, and Be, phonon interactions, for example, acoustical phonons and optical phonons, different exciton binding energies for boron and phosphorus, dislocation related PL emission peak lines, and oxygen related thermal donor PL emissions.

• 한국환경과학회지
• /
• 제11권3호
• /
• pp.155-160
• /
• 2002

Using measured data at Daegu by tethersonde for the period of 1984∼1987, we have investigated the lower atmospheric boundary layer structure including relationships between inversion layer and meteorological factors(wind and temperature), and the inversion strength and inversion height. The inversion layer was defined from the vertical temperature profile and its strength was analyzed with the wind shear as well as the vertical temperature gradient. From October to January, measured inversion layer isn't destroyed, however, in June, after sun rise, it is destroyed by surface heating and mixed layer is developed from surface. According to Pasquill stability classes, the moderately stable cases dominated. It's the larger vertical temperature gradient the lower SBL height. We have introduced B(bulk turbulence scale) which indicated SBL height. It's larger B, the higher SBL height and vice versa. It was noted that the bulk turbulence scale (B) is appropriate to determine the stable boundary layer height.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권2호
• /
• pp.1-11
• /
• 2008

The application of bulk superconducting materials to electrical power systems is very attractive because bulk high temperature superconductors offer excellent electromagnetic properties. In recent years there has been significant progresses in the research and fabrication of superconducting bulk materials. Numerous efforts have been made worldwide to make bulk YBCO as a replacement of the conventional magnets to produce larger magnetic field and hence to improve the device performance in electrical power applications. This paper gives a comprehensive review of different applications of bulk HTS materials, concentrating in three areas including superconducting bearing, superconducting motors and high field magnets. The advantages of applying superconducting material into each application are analysed. The status of current research in each section is summarized and examples are given to demonstrate how YBCO bulk materials can benefit the design of electrical devices. Several numerical models which calculate the electromagnetic properties of bulk superconductors are introduced and finally the article concludes with a review on the studies of the demagnetisation effect in superconducting bulk magnets which is extremely relevant to applying superconducting technology to rotating machines.

• 한국연초학회지
• /
• 제23권2호
• /
• pp.156-161
• /
• 2001

This study was carried out to evaluate the effect of bulk fermentation on chemical, chromatic, and organoleptic characteristics of burley leaf tobacco. The pile of ferment processing was taken up 32 days under the conolitions of leaf moisture contents of $28\pm1%$, with a pressure of some 200kg/$m^2$ within a closed room (mean air temperature and relative humidity ; 20.5$^{\circ}C$ and 58.7%). The pile was opened up and reconstructed two times when the maximum inside temperature reached at $45~46^{\circ}C$. The nicotine content was decreased, but amomnia contents and pH were significantly increased by bulk fermentation. Otherwise, the contents of total nitrogen, total volatile base, organic acids, and fatty acids were not affected by same treatment. The value of L(black to white), a(red to green) and b(yellow to blue) in chromatic characteristics were significantly decreased by bulk fermentation. In sensory test of the cigarettes made by addition of the tormented tobacco leaves after toasting in proportion of 19-25%, no negative characteristics in irritation, taste, and preference were detected in comparison with normally processed cigarettes(19%, 2 years fermentation, toasting). The results suggest that bulk fermentation may be useful to increase the proportion of burley leaf tobacco in the cigarettes and to shorten the period of storage for aging.

• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.37-44
• /
• 2007

Mechanical and thermomechanical properties of the bulk metallic glass (BMG) are so unique that the deformation behavior is largely dependent on the temperature and the strain rate. Impacting behavior of NiTiZrSiSn bulk metallic glass powder during kinetic spraying was investigated in this study. Considering the impact behavior of the BMG, the kinetic spraying system was modified and attached the powder preheating system to make the transition from the inhomogeneous deformation to the homogeneous deformation of impacting BMG particle easy BMG splat formation is considered from the viewpoint of the adiabatic shear instability. It is suggested that the impact behavior of bulk metallic glass particle is determined by the competition between fracture and deformation. The bonding of the impacting NiTiZrSiSn bulk amorphous particle was primarily caused by the temperature-dependent deformation and fracture (local liquid formation) behavior.