• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.119-123
• /
• 2012

Although LNG storage tanks are very delicate with chloride attack owing to its operating inshore location, specific integrity management system for chloride attack has not been studied so far. As the design warranty life time, about 25 years, has come, to prevent paying huge amount of construction cost and required resources for new alternative storage tanks and manage the life time of operating storage tanks, the basic data of chloride attack is necessary. This study intended to build up basic data for following detailed study to develop technologies for life time management of LNG storage tanks, NT Build 492 method in North Europe was used to test chloride diffusion coefficient for the newly-constructing concrete outer tank. Results of these tests lead us to the conclusion that 90 days diffusion coefficients show 46% of 28 days' due to a large quantity of fly ash mixing and much similar to estimation from concrete process table. It seems resonable to conclude that 90 days specimens are recommended estimating the chloride diffusion coefficient for LNG storage tanks to enhance the reliabilities.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.1
• /
• pp.1-10
• /
• 2000

The main purpose of this research is to show the consideration of the geographical effects related with its features and configuration on the height of the wall in Hwasong. The method of this research is based on old documentary records and actual measuring. The result of this research is to take advantage of nature geographical features and configuration. First the castle of wall construction is based on outside defensive protection, mainly it was made of stones or bricks. And took advantage of its natural environment. According to circumstance, there were two kinds of general method to build the wall., Second It was considered, They had so many difficulty to move stones to build wall, especially to rugged hilly steep mountain. Third There were three kinds of stones to build wall, Bottom stones were piled with Big stones, because of its stability. Third There were three kinds of stones to build wall, Bottom stones were piled with Big stones, because of its stability. On top of the wall was built with small stones it shows good harmony with small, middle, big size stones. It is considered not only stability but also beauty of appearance. Fourth Placing ChiSung was able to adjust height of wall low at the same time it was also taken advantage of a active defensive power. The suggestion of this research is to take advantage f nature geographical features and at the same time it was a perfect way to save the cost of construction. The further research of this should be continued to deepen because, it is the early stage, so it is maningful of eoffering a guidance for the furder research. in this research has a number of important question remain unsolved.

• Journal of information and communication convergence engineering
• /
• v.18 no.1
• /
• pp.28-32
• /
• 2020

Railway transportation is the main land-based transportation in most countries. Accordingly, railway-transportation safety has always been a key issue for many researchers. Railway pedestrian accidents are the main reasons of railway-transportation casualties. In this study, we conduct experiments to determine which of the latest convolutional neural network models and algorithms are appropriate to build pedestrian railroad accident prevention systems. When a drone cruises over a pre-specified path and altitude, the real-time status around the rail is recorded, following which the image information is transmitted back to the server in time. Subsequently, the images are analyzed to determine whether pedestrians are present around the railroads, and a speed-deceleration order is immediately sent to the train driver, resulting in a reduction of the instances of pedestrian railroad accidents. This is the first part of an envisioned drone-based intelligent security system. This system can effectively address the problem of insufficient manual police force.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.185-189
• /
• 2008

Practical pattern recognition systems should overcome very large class problem. Sometimes it is almost impossible to build every model for every class due to memory and time constraints. For this case, grouping similar models will be helpful. In this paper, we propose GMC(Group Model Clustering) to build a large class Chinese character recognition system. We built hidden Markov models for 10% of total classes, then classify the rest of classes into already trained group classes. Finally group models are trained using group model clustered data. Recognition is performed using only group models, in order to achieve reduced model size and improved recognition speed.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.21-28
• /
• 2011

In recent years, owing to the development of the image processing technology, the research to build control system using a vision sensor is stimulated. However, a random time delay must be considered, because it works of a various time to get a result of an image processing in the system. It can be seen as an obstacle factor to a control of visual tracking in real system. In this paper, implementing two vision controllers each, first one is made up PID controller and the second one is consisted of a Smith Predictor, the possibility was shown to overcome a problem of a random time delay in a visual tracking system. A number of simulations and experiments were done to show the validity of this study.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.210-216
• /
• 2018

National Health Insurance Service (NHIS) has put a great effort on extending life expectancy, for last 40 years. The system has also made remarkable outcomes in achieving universal health coverage. However, it is facing challenges of low health insurance benefits and sustainability risk due to low birth rate and aging society at the same time. To overcome the difficulties and build a lifelong health security system for the nation, it is required for NHIS to make multilateral changes in its roles. Based on the quantitative growth achieved so far, NHIS needs to strive for the growth in quality by not only increasing coverage and reforming contribution imposition system, but also reorganizing the relevant systems such as lifelong health management support, rational adjustment to the medical fee, and benefit costs monitoring. In addition, it's important for NHIS to restructure the organizational culture by having specialty and communicating with people for high quality of administration and health insurance sustainability.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.308-314
• /
• 2018

Injury is a serious problem that not only causes death but also significantly degrades the quality of life of the people and causes loss of socioeconomic opportunities and costs. Damage occurs as a result of an accident. Among them, natural disasters and artificial disasters take lives of many people in a short time and threaten their physical and mental health. The United States has responded to the disaster by establishing relevant laws and regulations and a response system with the recognition that health is recognised soon to be as national security in the wake of the 9/11 terrorist attacks and the Katrina disaster. It is necessary to build a knowledge infrastructure to train disaster response experts in public health area and to have health competence to cope with disasters.

• Communications of Mathematical Education
• /
• v.28 no.1
• /
• pp.65-79
• /
• 2014

The present study seeks to provide an easy path to differential perceptions of students at the upper high school level by applying a story telling method and also, characteristically, to earn some time for class discussion by reducing learning time for simple calculational procedure through Computer Algebra System(CAS) tools. This study offers a clear example of storytelling textbooks through Sage. Hence, the study aims at enabling students who have practiced contents with Sage tools to deal with diverse and complicated calculation problems, if they learn to build up mathematical formulas for those problems.

• The Journal of Korean Physical Therapy
• /
• v.28 no.5
• /
• pp.292-296
• /
• 2016

Purpose: This study was conducted to investigate the effects of modified cervical exercise on respiratory functions in smartphone users with forward head posture. Methods: Thirty-three smartphone users with forward head posture participated in this study. Subjects were divided into three groups that performed modified cervical exercise one time a day (A group), two times a day (B group), and three times a day (C group). All subjects performed the exercise for four weeks, during which time respiratory functions were measured. Results: There were significant differences in respiratory functions such as forced vital capacity, forced expiratory volume at one second, and maximal voluntary ventilation in the C group after four weeks (p<0.05). Moreover, the forced vital capacity differed among groups, and the post hoc test revealed a significant difference between A group and C group (p<0.05). Conclusion: The results of this study confirmed that modified cervical exercise improved respiratory functions in smartphone users with forward head posture. These findings indicate that smartphone users with forward head posture should perform modified cervical exercise to build correct posture and respiratory functions.

• Elastomers and Composites
• /
• v.32 no.1
• /
• pp.20-28
• /
• 1997

This study have Investigated the effect of various factors related to the physical properties of vulcanizated rubber compounds. rubber type, carbon black type and carbon black loading were selected as main factors and evaluation were tested by tables of orthogonal arrays with 3 factors and 3 levels. rubber types have affected cure time, tensile strength, and $T_g$ as main factor and carbon black loading have affected viscosity, scorch time, maximum torque, hardness, 300% modulus, rebound, heat build-up, $0\;&\;60^{\circ}C$ tangent delta, PICO and CUT/CHIP loss as main factor but the effects of carbon black type have affected only bound rubber content.