• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.299-302
• /
• 2008

The behavior of continuous welded rail tracks is directly affected by the following various parameters: rail size; track curvature; neutral temperature; misalignment; and ballast resistance. Most of these parameters are having the nature of random variables. Therefore, uncertainties exist in the buckling safety assessments. The evaluation of the buckling safety and the maintenance strategy based on the deterministic analysis are very inefficient since the value of deterministic parameters are selected in worst track condition. In this study, the probabilistic approach method were investigated considering the probabilistic distribution of major parameters such as the neutral temperature of rail and the ballast resistance.

• Steel and Composite Structures
• /
• 제48권1호
• /
• pp.27-41
• /
• 2023

Under the long-term effect of corrosive environment, many cold-formed steel (CFS) structures have serious corrosion problems. Corrosion leads to the change of surface morphology and the loss of section thickness, which results in the change of instability mode and failure mechanism of CFS structure. This paper mainly investigates the elastic local buckling behavior of corroded CFS columns. The surface morphology scanning test was carried out for eight CFS columns accelerated corrosion by the outdoor periodic spray test. The thin shell finite element (FE) eigen-buckling analysis was also carried out to reveal the influence of corrosion surface characteristics, corrosion depth, corrosion location and corrosion area on the elastic local buckling behaviour of the plates with four simply supported edges. The accuracy of the proposed formulas for calculating the elastic local buckling stress of the corroded plates and columns was assessed through extensive parameter studies. The results indicated that for the plates considering corrosion surface characteristics, the maximum deformation area of local buckling was located at the plates with the minimum average section area. For the plates with localized corrosion, the main buckling shape of the plates changed from one half-wave to two half-wave with the increase in corrosion area length. The elastic local buckling stress decreased gradually with the increase in corrosion area width and length. In addition, the elastic local buckling stress decreased slowly when corrosion area thickness was relatively large, and then tends to accelerate with the reduction in corrosion area thickness. The distance from the corrosion area to the transverse and longitudinal centerline of the plate had little effect on the elastic local buckling stress. Finally, the calculation formula of the elastic local buckling stress of the corroded plates and CFS columns was proposed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.22-27
• /
• 1990

Since an eigenvalue problem in structural analysis has been recognized as an important process for the assessment of structural strength, it is usually to be carried out the eigenvalue analysis or buckling analysis of structures when the compression behabiour of the member is dorminant. In general, various variables involved in the eigenvalue problem have also shown their variability. So it is natural to apply the probabilistic analysis into such problem. Since the limit state equation for the eigenvalue analysis or buckling reliability analysis is expressed implicitly in terms of random variables involved, the probabilistic finite element method is combined with the conventional reliability method such as MVFOSM and AFOSM for the determination of probability of failure due to buckling. The accuracy of the results obtained by this method is compared with results from the Monte Carlo simulations. Importance sampling method is specially chosen for overcomming the difficulty in a large simulation number needed for appropriate accurate result. From the results of the case study, it is found that the method developed here has shown good performance for the calculation of probability of buckling failure and could be used for checking the safety of the calculation of probability of buckling failure and could be used for checking the safely of frame structure which might be collapsed by either yielding or buckling.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.105-112
• /
• 2006

Liquefaction-induced lateral spreading has been the most extensive damage to pile foundations during earthquakes. However, a case of pile failure was reported despite the fact that a large margin of safety factor was employed in their design. This means that the current seismic design method of pile is not agreeable with the actual failure mechanism of pile. Newly proposed failure mechanism of pile is a pile failure based on buckling instability. In this study, failure behavior of pile embedded in liquefied soil deposits was analyzed considering lateral spreading and buckling instability performing 1g shaking table test. As a result, it can be concluded that the pile subjected to excessive axial loads ($near\;P_{cr}$) can fail by buckling instability during liquefaction. When lateral spreading took place in sloping grounds, lateral spreading increased lateral deflection of pile and reduced the buckling load, promoting more rapid collapse. In addition, buckling shape of pile was observed. In the ease of pile buckling, hinge formed at the middle of the pile, not at the bottom. And in sloping grounds, location of hinge got loiter compared with level ground because of the effects of lateral spreading.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.25-33
• /
• 2018

The safety of structure was evaluated by taking into consideration the complex marine environmental conditions of the Lattice boom crane, which is widely used in offshore plants due to less influence by wind. CFX analysis was carried out to take into account the influence of wind speed, and the result was applied as a boundary condition to perform static analysis according to the luffing angles of $28^{\circ}$, $61^{\circ}$, and $80^{\circ}$ in the on board and off board, respectively. In addition, the Lattice Boom Crane is large slender structure, and the possibility of buckling is interpreted under three conditions where the biggest stress occurs. All conditions satisfied the safety requirements of the Classification Regulations. Also, as a result of the buckling analysis, the load less than the critical load was applied so buckling does not occur.

• Steel and Composite Structures
• /
• 제8권5호
• /
• pp.389-402
• /
• 2008

In December 2005, one(A) of the two pre-engineered warehouse buildings in the port of K City of Korea was completely destroyed and the other(B) was seriously damaged to be demolished. Over-loaded snow and unexpected blast of wind were the causes of the accident and destructive behavior was brittle fracture caused by web local buckling and lateral torsional buckling at the flange below rafter. However, the architectural design technology of today based on material non-linear method does not consider the tolerances to solve the problem of such brittle fracture. So, geometric non-linear evaluation which includes initial deformation, width-thickness ratio, web stiffener and unbraced length is required. This study evaluates the structural safety of 4 models in terms of width-thickness ratio and unbraced length using ANSYS 9.0 with parameters such as width-thickness ratio of web, existence/non-existence of stiffener and unbraced length. The purpose of this study is to analyze destructive mechanism of the above-mentioned two warehouse buildings and to provide ways to promote the safety of pre-engineered buildings.

• Structural Engineering and Mechanics
• /
• 제14권3호
• /
• pp.331-343
• /
• 2002

Because of the increasing span of arch bridges, ultimate capacity analysis recently becomes more focused both on design and construction. This paper investigates the static and ultimate behavior of a long-span steel arch bridge up to failure and evaluates the overall safety of the bridge. The example bridge is a long-span steel arch bridge with a 550 m-long central span under construction in Shanghai, China. This will be the longest central span of any arch bridge in the world. Ultimate behavior of the example bridge is investigated using three methods. Comparisons of the accuracy and reliability of the three methods are given. The effects of material nonlinearity of individual bridge element and distribution pattern of live load and initial lateral deflection of main arch ribs as well as yield stresses of material and changes of temperature on the ultimate load-carrying capacity of the bridge have been studied. The results show that the distribution pattern of live load and yield stresses of material have important effects on bridge behavior. The critical load analyses based on the linear buckling method and geometrically nonlinear buckling method considerably overestimate the load-carrying capacity of the bridge. The ultimate load-carrying capacity analysis and overall safety evaluation of a long-span steel arch bridge should be based on the geometrically and materially nonlinear buckling method. Finally, the in-plane failure mechanism of long-span steel arch bridges is explained by tracing the spread of plastic zones.

• 해양환경안전학회지
• /
• 제14권1호
• /
• pp.89-93
• /
• 2008

보강판은 선박이나 해양구조물에서 폭넓게 사용되고 있는 기본적인 강도 부재이다. 이러한 보강판은 선박의 갑판부, 선측부, 선저부에 흔히 사용되고 있다. 보강판은 보강재가 어느 한 방향으로 또는 양방향으로 구성되어 있으며 후자에 대해서 보통 그릴리지라고 한다. 보강판의 좌굴 및 소성붕괴는 선각거더의 파손 원인이 되므로 좌굴 및 최종강도가 정확하게 규명할 필요가 있다. 본 연구에서는 범용유한요소해석코드인 ANSYS를 이용하여 좌굴 및 좌굴 후 거동에 대한 평가를 수행하고 보강재 치수변화, 수압의 영향을 고려하여 압축최종강도에 대해 해석 수행하였다.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.53-60
• /
• 1997

일반적으로 선박 판부재의 좌굴강도에 대한 안전성 평가는 선체구조 설계단계에서 반드시 거쳐야 할 단계로 한 척의 배는 수많은 판부재로 구성되어 선박구조 전체에 대한 이론적이며 체계적인 시스템을 이용한 좌골강도평가의 정확도 및 효율성이 강조되고 있다. 그러나 현재의 판부재 좌굴강도를 평가하는 각 선급의 규정치가 많은 영향인자를 고려치 않고 있거나 함축척으로 고려하고 있기 때문에 경우에 따라서는 좌굴강도가 상당한 안전측의 값을 제시하는 등 실제 선급규정치의 사용에 제약을 주기도 한다. 따라서 본 연구에서는 면내인장력의 영향등 선급들의 좌굴 규정치뿐만이 아니라 면내인장력의 효과, 경계조건, 횡하중 및 잔류응력등을 고려하면서 손쉽게 좌굴평가를 수행할 수 있는 선진 좌굴평가시스템을 개발하였다. 이들 선진 좌굴평가시스템을 이용하면 선박판부재의 보다 정도 높고 효율적인 평가가 가능하리라 생각되며 앞으로 대중적인 사용을 위해 워크스테이션 외에도 개인용 컴퓨터에서의 시스템 구축을 계획하고 있다.

• 한국지반환경공학회 논문집
• /
• 제12권12호
• /
• pp.13-20
• /
• 2011

외수압에 의한 강관 라이닝 좌굴 사례를 조사, 평가하여 강관 라이닝의 안전성에 미치는 요소 및 그 중요도를 산정하고자 하였다. 대상터널은 ${\bigcirc}{\bigcirc}$광역상수도 도수시설인 직경 2m의 수로터널로서 터널 라이닝은 내부의 강관 라이닝과 배면의 뒷채움 콘크리트로 구성되어 있다. 두 개의 수로터널에서 발생된 강관 라이닝 좌굴 손상을 대상으로 손상의 형태 및 설계 조건을 상세하게 조사하였다. 좌굴 손상에 적용 가능한 좌굴 안전성 평가방법을 기존의 문헌 자료를 참조하여 선정하였으며, 손상에 대한 조사결과와 비교하였다. 또한 본 지역의 수리지질학적인 특성이 좌굴 손상에 미치는 영향을 검토하였다. 연구결과 수리지질학적 지층특성뿐만 아니라 터널 라이닝의 적절한 시공이 강관 라이닝의 좌굴에 영향을 미치는 중요한 요소이며, 외수압의 크기 결정은 수리지질 특성에 따라 산정되어야 하는 것을 알 수 있었다. 기존 손상 사례에 대한 연구는 압력 수로터널의 강관 라이닝에 대한 설계, 시공 및 유지관리 기간 중의 문제점 및 개선사항을 도출하는데 활용될 수 있을 것이다.