• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2324-2330
• /
• 2010

In middle and high school to learn the principles of fluid mechanics to Experiments in space and time constraints and difficulties for the study of the principles of fluid mechanics to the problem is superficial. In this paper, Pascal's principles, Archimedes' Principle, Bernoulli's Theorem, etc. learning about the fluid mechanics and implemented in Web Browser, In connection with flash and HTML, web simulation is to implement. Web Based Instruction program that implemented a comparative analysis became an effect of 15% to industrial total high school students in satisfaction, Interest, Achievement. The fluid mechanics education through engineering design and web design through the actual web server is implemented on the Internet over broadband. Department of Education, this study the fluid mechanics and the Internet will contribute to the development of distance education.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1571-1579
• /
• 2009

This paper proposes a P2P(Peer-to-Peer) streaming protocol which allows various QoS(Qualify of Service) requirements of video streaming to be supported for various personal IPTV applications in ubiquitous Internet environments. The proposed P2P streaming protocol takes fairly short startup delay, guarantees end-to-end delay bound and bandwidth requirements, and supports reliability level of video streaming for an IPTV application. The QoS-based P2P streaming protocol can properly use not only the advantages of scalability, availability, and ubiquity of P2P streaming but also complement its disadvantages of performance and reliability so that various types of personal IPTV applications can be properly implemented in the existing broadband Internet environments.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.557-566
• /
• 2008

NGN(Next Generation Network) is a communication network which can make use of broadband and QoS-enabled transport technologies. One of the main service issues over NGN is a multimedia service, such as IPTV, using a multicast method. And overlay multicast technology is one of the promising solutions instead of traditional multicast technology which has a few problems, and supports flexibility and scalability for multicast services. Also, the main controversial topic in NGN and overlay multicast is QoS. In the present paper, we designed an agent in each receiver's network, and a manager which is in a source network and which manages the whole multicast network. Both of them are communicating with each other and applying resource policies to their multicast network. This mechanism enables overlay multicast to support QoS, focusing on RACF(Resource and Admission Control Functions) in NGN QoS architecture.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.415-422
• /
• 2020

Federal Communications Commissions (FCC) has adopted a new rule that can provide a 1,200 MHz unlicensed spectrum to maximize the public benefits in the 5.925 ~ 7.125 GHz(6 GHz) band by expanding unlicensed broadband into the 6 GHz band while also ensuring that licensed services that operate in the band continue to thrive. In Korea, the M/W band of 6 GHz has been reallocated to introduce unlicensed services in the 6 GHz band. Considering the national interests, the entire 1,200 MHz will be supplied for the indoor uses, but only the 500 MHz of the lower bandwidth (5925 ~ 6425 MHz) will for the outdoor uses under the limited power to protect the incumbent services. The introduction of unlicensed devices is being actively promoted through the reallocation of the 6 GHz M/W band, but since it is desperately necessary to prepare technical requirements to operate them in Korea. In this paper, the US 6 GHz unlicensed rules has been analyzed, these results will be utilized for establishing Korean technical standards with the unlicensed spectrum expansion.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.503-510
• /
• 2016

In recent years, owing to the growing user demand for the two-way internet service based on the move global broadband communications, a new type of satellite terminal has developed, known as earth station in motion (ESIM). This service was required by Resolution 158 (WRC-15) to study on the coexistence with the co-primary fixed service (FS) in 27.5-29.5 GHz as a FSS uplink. In this paper, four scenarios was introduced to account for the antenna pointing error and the azimuth for an analysis on the sharing between ESIM and FS. From analysis results, the required separation distance between two systems should be about 32~52 km according to the elevation angles of $20^{\circ}{\sim}40^{\circ}$ using thresholds of 5% and 10% outage probability. Therefore, it is necessary to control the azimuth angle due to a moving terminal as well as the pointing error of ESIM to minimize the required separation distance and to protect the co-primary FS.

• Journal of Advanced Navigation Technology
• /
• v.4 no.1
• /
• pp.23-35
• /
• 2000

In this paper, the design for a PCS base station antenna which is using broadband method by a stacked structure has been studied. The sensitive parameters, such as the parasitic elements, the height of air layer between the upper and lower patch, and the variation of feed point, of the microstrip antenna that has stacked structure in a characteristics variation situation are classified and the characteristics has been investigated through the simulations. A designed antenna has following characters. Impedance bandwidth is Z57.5MHz(VSWR${\leq}$2), horizontal beamwidth is $64.1^{\circ}$, and gain is 14.7dBi. Therefore, it is confirmed the characteristics is good. In this paper, through the designing of a stacked microstrip antenna, we has investigated the availability for Korea PCS base station antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.441-444
• /
• 2018

In this paper, a microstrip antenna for LTE / WiMAX is designed for UWB communication. The proposed antenna is designed for FR-4 (er = 4.3), 29[mm] x 45[mm], and can be used in the LTE frequency band of 1.82[GHz] and the WiMAX frequency band of 3.5[GHz]. Studio 2014 was used. The simulation results show 1.785[dB] at 1.82[GHz] and 1.720[dB] at 3.5[GHz]. S-parameters were also found to be less than -10dB (WSWR2: 1) in the desired frequency band. In order to achieve broadband, miniaturization, low cost and low loss, Width, length, width of transmission line, etc. were calculated. Therefore, it is considered that the applicable antenna can be applied satisfying the desired condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.445-448
• /
• 2018

In this paper, we design microstrip antenna for GPS / WiFi for broadband mobile communication. The proposed antenna is designed to be used in the FR-4 (er = 4.3), the size is $40mm{\times}50mm$, and it can be used in the GPS frequency band of 1.6GHz and the WiFi frequency band of 5GHz. 2014, and the simulation result shows that the gain is 1.909dB at 1.6GHz and 4.607dB at 5GHz. The S-parameter also showed a result of less than -10dB (WSWR2: 1) in the desired frequency band. Recently, it is expected that GPS navigation system, which is widely used in smart phones and tablet PCs, can be easily and conveniently used by combining and applying GPS with WiFi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1372-1382
• /
• 1999

The major source of errors in high-speed networks such as Broadband ISDN(B-lSDN) is buffer overflow during congested conditions. These congestion errors are the dominant sources of errors in 1high-speed networks and result in cell losses. Conventional communication protocols use error detection and retransmission to deal with lost packets and transmission errors. However, these conventional ARQ(Automatic Repeat Request) methods are not suitable for the high-speed networks since the transmission delay due to retransmissions becomes significantly large. As an alternative, we have presented a method to recover consecutive cell losses using forward error correction(FEC) in ATM(Asynchronous Transfer Mode)networks to reduce the problem. The performance estimation based on the cell discard process model has showed our method can reduce the cell loss rate substantially. Also, the performance estimations in ATM networks by interleaving and IP multicast service are discussed.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.277-279
• /
• 2005

Recently, due to the increase of power conversion devices and nonlinear loads with the development of information, communication and control technologies, the instantaneous minute interruption factors such as voltage & current harmonics, surge occurring frequency, instantaneous voltage variation, voltage unbalance, flicker etc. have greatly threatened the power quality, and the deterioration of electric power facilities and the functional error of controllers are increasing. As such an instantaneous minute interruption appears to be small and local, accurate evaluation with measurement is difficult and total analysis system is required through a wide range of power quality effect analysis such as the simultaneous measurement on various power supply phenomena and the analysis on the interrelation with system loads. Most of conventional power quality diagnosis equipments have beer developed and applied, which were able to measure the stability rate of frequency, the stability rate of voltage, the electricity-failure duration etc, However, they were insufficient to analyze the system present situation, understand the cause of the failure occurred by the problem of power quality and analyze out the phenomena. Accordingly, this study will address the development of the system for a wide range of power quality diagnosis over the present level, the system for supporting the determination such as the analysis on risk factors, failure mode and impact, the system for harmonic evaluation based on international standards(IEC 61000 Series) and the total power quality diagnosis network & system with the extension and openness as a local and national-scale broadband power quality diagnosis system.