• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.8-15
• /
• 2012

Optical property improvements for ONP (old newspaper) and OMG (old magazine) were attempted by application of in-situ $CaCO_3$ formation process on recycled fiber surfaces. Washing treatment of ONP and OMG resulted in 35~40% yield loss for around 6% brightness improvement. Washing plus bleaching process with $H_2O_2$ and FAS (formamidine sulfinic acid) improved brightness and ERIC values a little more with the same amount of yield loss as washing treatment. In-situ $CaCO_3$ formation method improved those optical properties much better than the washing plus bleaching method without loss of yield, and better than the case of adding high brightness PCC up to the same ash level. It can be said that the in-situ $CaCO_3$ formation method may be used as an effective alternative for upgrading optical properties of recycled fibers.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.2
• /
• pp.93-96
• /
• 2012

We have designed high performance prism light-guide plate (LGP) in 17 inch TFT-LCD. In test result to embody high brightness BLU in case of LGP of base and upper surface with 17 inch, thickness 8mm adding prism construct. Using optical simulation, we forecast the brightness and uniformity in LGP with prism structure. And we adopted novel injection mold method and Nickel stamper to make actual evolution sample. Novel injection mold process has steady heating time zone in heat cycle time of injection mold process. For this novel heat cycle control, we achieved above 90[%] height prism structure as our design. It is superior brightness improvement than previous that of printing form about some 20[%] and in this course to embody actual material it succeeded prism LGP production by 17 inch injection form process.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.259-268
• /
• 2014

Uniform brightness is very crucial for LCD panels, which should be made in during manufacturing. Usually some compensating algorithms are applied to recover the brightness deviation that occurs in actual panels. Although such remedying tools are used, it is very hard to prevent horizontal or vertical crosstalks that represent the brightness level difference in horizontal or vertical direction. This research applied transformability Taguchi dynamic characteristics and "nominal is best" static characteristic simultaneously to design the compensating circuit optimally that may reduce the crosstalks and make uniform brightness level.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.178-181
• /
• 2007

We have designed high performance prism light-guide plate (LGP) in 17 inch TFT-LCD. In test result to embody high brightness BLU in case of LGP of base and upper surface with 17 inch, thickness 8 mm adding prism construct, it is superior brightness improvement than previous that of printing form about some 20% and in this course to embody actual material it succeeded prism LGP production by 17 inch injection form process.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.247-255
• /
• 2013

In this study, the colors and characteristics of Gwangbok-ro of Busan were analyzed in the standpoint of local images based on the examination of the facade designs of stores along the road of Gwangbok-ro, Busan a main street with massive population flow. To that end, the facades of stores, correlation with the city, color and locality were examined, and after the status of facade designs in Gwangbok-ro were identified through case survey by it, color images were analyzed. For color analysis, Munsell color system was used as basic tool. As a result of examining the colors in Gwangbok-ro area, the following status could be analyzed on 3 attributes of hue, brightness and chroma: First, analysis results of hue indicated that dominant color that covers 70% or more of the area represented mid brightness and low chroma in GY(36.1%) series, subsidiary color which covers 25% or more of the area mid brightness and low chroma in YR(26.5%) series, and accent color that covers less than 5% of the area high brightness and low chroma of GY(40%) series. Second, in brightness analysis, dominant color mostly represented mid brightness, subsidiary color mid brightness and accent color high brightness respectively. In particular accent color showed more intensive crowding phenomenon in high brightness. Third, as for chroma, dominant color, subsidiary color and accent color all are gathered in low chroma, however in small number of accent colors, peculiar high chroma appeared notable. In conclusion, the colors of Gwangbok-ro area analyzed based on the facade design of the stores along the road in this study were superficial colors that reflect the life of people in the area, artificial colors by improvement of the local environment. This study is meaningful in that the image of Gwangbok-ro was found through building colors in one part of the city Busan. It is judged that the study results would become useful as reference document in planning out environment colors later on.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.977-985
• /
• 2020

KOMPSAT-3A launched in 2015 provides Middle InfraRed(MIR) images with 3.3~5.2㎛. Though the satellite provide high resolution images for estimating bright temperature of ground objects, it is different from existing satellites developed for natural science purposes. An atmospheric compensation process is essential in order to estimate the surface brightness temperature from a single channel MIR image of KOMPSAT-3A. However, even after the atmospheric compensation process, there is a brightness temperature error due to various factors. In this paper, we analyzed the cause of the brightness temperature estimation error by tracking signal flow from camera physical characteristics to image processing. Also, we study on possibility of improvement of MIR brightness temperature bias error of KOMPSAT-3A using GEOKOMPSAT-2A. After bias compensation of a real nighttime image with a large bias error, it was confirmed that the surface brightness temperature of KOMPSAT-3A and GEOKOMPSAT-2A have correlation. We expect that the GEOKOMPSAT-2A images will be helpful to improve MIR brightness temperature bias error of KOMPSAT-3A.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.53-60
• /
• 2005

This work Proposes and describes an LCD backlight driver IC using a voltage feedback circuit which improves the brightness uniformity. The proposed circuit controls the brightness of a backlight by amplifying of sampling voltage at a lamp. To keep the uniformity of brightness, the circuit has a reference lamp. The output voltage of the reference lamp is supplied commonly to each lamp that reduces a resistance deviation of the lamps. As a result, the proposed circuit shows brightness uniformity improvement of about $40\%$ compared to the conventional ones.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.68-72
• /
• 2008

AlGaInP high-brightness LEDs(HB-LEDs) have gained importance a variety of application operating in the red, orange, yellow and yellow-green wavelength. The light generated from inside LED chips should be emitted to the air through the surfaces of the chips. However, because of the differences between the semiconductor and air or epoxy's refractive index, some of the light was blocked so that caused lowering external quantum efficiency. In this study, nano-scale roughness on the top-GaP layer of AlGaInP epitaxial wafer was fabricated to improve' the brightness of AlGaInP LEDs. Nano-scale roughness was made by ICP dry etcher. Our AlGaInP LEDs with nano-scale roughness has higher brightness (about 28.5 %) than standard AlGaInP LEDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.3
• /
• pp.242-247
• /
• 1998

In this study, we have synthesized $ZnGa_2O_4$:Mn,X powder doped with Mn, MnO, $MnF_2$ and $MnCl_2$, low voltage green emitting phosphor, in vacuum atmosphere. From PL spectra, the intensity of the emission peak, the brightness with coactivator show that $ZnGa_2O_4$:Mn,Cl > $ZnGa_2O_4$:Mn,F > $ZnGa_2O_4$:Mn,O > $ZnGa_2O_4$:Mn. These improvement of the brightness are caused by the increase of the concentration of $Mn^{2+}$ ion. In case of $ZnGa_2O_4$:Mn,Cl and ZnGa$_2$O$_4$:Mn,F, the brightness is enhanced much more, which is owed to the decrease of defect of host material. For $ZnGa_2O_4$:Mn,Cl phosphor fabricated with optimized condition, the decay time becomes short from 30 ms of the $ZnGa_2O_4$:Mn and $ZnGa_2O_4$:Mn,O to 6 ms and the brightness of CL at 1 kV, 1 mA is 60 cd/$m^2$.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.493-494
• /
• 2008

LGP for the small size exit was designed and fabricated. Pattern design method, which is the most important thing in the design of the LGP, was converted from the line type into the cross type. By using this new method, the brightness unevenness, which was very difficult problem to be solved in V-cutting method, was improved. Currently products had 78% of the brightness uniformity but newly developed product in this research had 87% of the brightness uniformity. Also the optimized design rule provided the improvement of the brightness of the LGP developed in this study, that has brightness of $871cd/m^2$ whichwas 98% higher than the common products.