• 콘크리트학회지
• /
• 제19권1호
• /
• pp.79-86
• /
• 2007

• Structural Engineering and Mechanics
• /
• 제35권1호
• /
• pp.37-52
• /
• 2010

Special-shape arch bridge for self-balance (SBSSAB) in Zhongshan City is a kind of new fashioned spatial combined arch bridge composed of inclined steel arch ribs, curved steel box girder and inclined suspenders, and the mechanical behavior of the SBSSAB is particularly complicated. The SBSSAB is aesthetic in appearance, and design of the SBSSAB is artful and particular. In order to roundly investigate the mechanical behavior of the SBSSAB, 3-D finite element models for spatial member and shell were established to analyze the mechanical properties of the SBSSAB using ANSYS. Finite element analyses were conducted under several main loading cases, moreover deformation and strain values for control section of the SBSSAB under several main loading cases were proposed. To ensure the safety and rationality for optimal design of the SBSSAB and also to verify the reliability of its design and calculation theories, the 1/10 scale model tests were carried out. The measured results include the load checking calculation, lane loading and crowd load, and dead load. A good agreement is achieved between the experimental and analytical results. Both experimental and analytical results have shown that the SBSSAB is in the elastic state under the planned test loads, which indicates that the SBSSAB has an adequate load-capacity. The calibrated finite-element model that reflects the as-built conditions can be used as a baseline for health monitoring and future maintenance of the SBSSAB.

• Wind and Structures
• /
• 제31권3호
• /
• pp.209-216
• /
• 2020

Aiming at the wind-resistant design of a sea-crossing arch bridge, the static aerodynamic coefficients of its girder (composed of stretches of π-shaped cross-section and box cross-section) were studied by using computational fluid dynamics (CFD) numerical simulation and wind tunnel test. Based on the comparison between numerical simulation, wind tunnel test and specification recommendation, a combined calculation method for the horizontal force coefficient of intermediate and small span bridges is proposed. The results show that the two-dimensional CFD numerical simulations of the individual cross sections are sufficient to meet the accuracy requirements of engineering practice.

• Steel and Composite Structures
• /
• 제27권2호
• /
• pp.161-175
• /
• 2018

In this study, in-situ dynamic tests of the world's longest steel box tied-arch bridge over the Yangtze River, China, are reported. The double deck bridge supports highway and monorail systems at upper and lower levels, respectively. Strain, displacement, and acceleration responses were measured and used to investigate the vibration characteristics of the bridge when excited by running trains and/or trucks at a speed of 5-60 km/h, train braking, and truck bouncing. Impact factors were correlated with the running speed of trains and trucks. A three-dimensional finite element model of the coupled monorail-train-bridge vibration system accounting for track irregularities was established to understand the system behavior and validated by the experimental results. Truck bouncing was the dominant impact factor on bridge responses. The running speed of vehicles determined the riding comfort of traveling trains.

• 한국공간구조학회논문집
• /
• 제14권1호
• /
• pp.69-76
• /
• 2014

When we excavate an underground to build basement, the ground anchors are needed to prevent collapse of neighboring ground, subsidence and movement. Ground anchor construction required shore sheet piles, wales and struts as to maintain secure excavation. Existing box-type bracket using head part of ground anchor can not be possibly adjustable to the boring angle because the brackets are manufactured with unified angle in a factory. Also, box-type brackets have imperfection and instability caused by inequable force. In this study, a new bracket system is proposed. The bracket's side plate is reinforced and the angle of boring can be controlled. To investigate the structural performance of presented brackets, FEM analysis has been performed by using ANSYS commercial program. As a result, this bracket shows sufficient stability for all angle case and the strength is increased about 24% than existing bracket.

• Journal of the Korean Statistical Society
• /
• 제31권2호
• /
• pp.199-212
• /
• 2002

This article introduces transfer function model (TFM) with conditional heteroscedasticity where ARCH concept is built into the traditional TFM of Box and Jenkins (1976). Model building strategies such as identification, estimation and diagnostics of the model are discussed and are illustrated via empirical study including simulated data and real data as well. Comparisons with the classical TFM are also made.

• Journal of Hydrospace Technology
• /
• 제2권1호
• /
• pp.27-40
• /
• 1996

The prediction of the crushing strength and corresponding energy dissipation of unstiffened and stiffened plates under axial compression is discussed. Semi-empirical formulae for the crushing strength and dissipation energy of these stiffened plates are derived from the assesment of the structural behavior of unstiffened and stiffened box columns consisted of rectangular plates with longitudinal, transverse and orthogonal stiffeners. To demonstrate the effectiveness of proposed formulae, they are compared with the existing formulae and experimental results, which are shown in good agreements.

• 한국터널지하공간학회 논문집
• /
• 제19권1호
• /
• pp.41-56
• /
• 2017

최근 대도시에서는 교통량 증가 등으로 인해 대심도 터널 건설의 필요성이 날로 증대되고 있어서, 대심도 복층터널의 분기에 대한 연구가 필요한 실정이다. 때문에 본 연구에서는 FLAC 2D 프로그램을 이용하여 지반의 종류, 측압계수, 보강방법, 토피고를 매개변수로 선정하여 민감도 분석을 실시하였다. 궁극적으로 터널 분기부에서 최적의 분기부 형상 및 보강방법을 찾고자 하였다. 본 연구결과 일반적인 생각과 달리 박스형 확폭단면이 아치형보다 안정성이 높게 나타났다. 이는 아치형 굴착면적이 박스형보다 약 30% 정도 넓었기 때문인 것으로 판단된다. 또한 지반이 좋지 않은 경우는 록볼트 보강보다 강관그라우팅 보강 시의 안정성이 더 높았으며, 강관그라우팅의 보강두께와 범위는 확폭부의 안정성에 큰 영향을 끼치지 못하였다.

• 한국지반환경공학회 논문집
• /
• 제4권2호
• /
• pp.57-64
• /
• 2003

좁고 길게 굴착된 고랑형태의 되메움 지반의 토압에 관한 해석에 널리 사용되어져 오던 Marston(1913), Spangller(1982) 이론은 R.L. Handy(1985)가 굴착벽면과 되메움 흙과의 상호작용에 의한 최소주응력의 고리를 연결한 최소주응력 아치로서 표현함으로 보다 명확한 설명이 가능하게 되었다. 이후 C.G. Kellogg(1993)는 지금까지 주로 수직하게 대칭된 공간만을 대상으로 논의 되오던 되메움 공간형태를 경사지게 대칭된 공간형태에 대하여 연구를 확장하였다. 발표된 C.G. Kellogg(1993) 이론식은 이론식의 도출 과정에 있어 경사 벽면의 마찰저항이 아닌 경사단면 저부에서 연직한 되메움 흙 자체의 내부 마찰의 크기로서 가정하였다. 본 연구는 C.G. Kellogg가 적용한 경사단면 저부에서 연직한 면의 마찰저항은 경사진 단면에서의 마찰저항과는 다른 크기를 갖을 것이며 이 크기는 토압 산출에 영향을 미칠것으로 판단되어 이를 실내모형 토조실험, C.G Kellogg(1993) 이론식, 수치해석, 실제 경사벽면에 미치는 마찰저항을 고려한 수정된 C.G. Kellogg 이론식으로 규명하고자 하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권3호
• /
• pp.155-162
• /
• 2011

파형강판을 이용한 구조물은 기존의 철근콘크리트 구조물에 비하여 공기단축효과 및 경제성 등이 우수하고 유지관리비의 절감 측면에서 유리한 것으로 평가되고 있다. 최근 수로암거 및 생태 이동 통로등에 철근콘크리트 암거 대체 재료로 널리 활용되고 있으며 앞으로 적용실적이 더 증가할 것으로 예상된다. 파형강판을 사용한 구조물은 주로 아치형과 박스형의 두가지 형태이며, 아치형 구조물은 압축력에 의하여 설계하며 박스형 구조물은 플레이트 부재내의 모멘트에 의하여 설계한다. 따라서 본 연구에서는 기존의 대골형 파형강판보다 골의 피치와 깊이가 늘어난 성능 개선된 파형강판의 성능을 평가고하고 설계에 반영하기 위해 정적 압축 시험 및 휨시험을 수행하여 시험체 두께별 이음부의 극한강도 및 모멘트 강도를 검토 하였다.