• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.18-22
• /
• 2011

The Ranking source panel method was used to predict the flow phenomenon of a ship with a goose-neck type bulbous bow penetrating the free surface. The non-linearity of the free surface boundary condition was fully satisfied using an iterative calculation method, and the raised panel method was adopted to obtain a more stable solution at each iteration step. The panel cutting method was applied to generate a hull calculation grid at each iteration step, including the first step. At that time, the nose of the goose-neck type bulbous bow was divided by the free surface and the free surface panel was modified at each iteration step using the variable free surface panel method. Numerical calculations were performed to investigate the validity and efficiency of the applied numerical algorithm using the 3600 TEU container carrier. The computed wave resistance coefficients were compared with the experimentally achieved residual resistance coefficients.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.3
• /
• pp.43-54
• /
• 2002

Some factors had influence upon the grotesque image formation expressed in fashion: for instance, thanatos, religions, fin de siecle (end of the century), the aesthetics of ugliness, subculture group's resistance and technology development, etc. Those factors have formed a grotesque while exchanging influence each other, and have following features: First, the thanatos, which is destructive and aggressive instinct of the inner world of human being, creates frightening object and motif to form the images of grotesque. Second, from religious point of view, the church made the Devil a tool for maintenance of power: They manipulated physical body and give a damage to it to sublimate it in holy existence, so that they could feel catharsis. Third, there was fin de siecle (end of the century) to let people have negative life attitude, such as uneasiness on following century, eschatology, skepticism and nihilism, etc. Fourth, the ugliness having unpleasantness and disharmony occupies governing position when our society becomes corrupted and uneasy, and the aesthetics of ugliness discloses the inconsistency of ideal and beautiful life in the grotesque images. Fifth, subculture groups, i.e., the lower classes, homosexual and the youth's group, etc, form the grotesque images by political and ideological resistance, complaints and specific identity, etc concerning governing culture keeping traditional ethics consciousness. Sixth, recent technology development has destroyed a boundary between human being and machinery, and bio-technology development has created transplant operation, plastic operation and other human body transformation operations, and genome research, etc has raised human being's identity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.761-769
• /
• 1999

In this paper the effect of aging heat treatment to the Corrosion behavior for the Nimonic 80A superalloy was studied by AC Impedance methods. Tested solution was 3.5% with tempera-ture $25^{\circ}C$ Electro-chemical corrosion test were carried out for the Nimonic 80A super-alloy which solution heat treated at $1080^{\circ}C$ for 8 hours followed by aging heat treated at $650^{\circ}C,\;700^{\circ}C,\;750^{\circ}C\;800^{\circ}C$ and $850^{\circ}C$ with 16hours under vacuum environment. The obtained results were as follows; 1. Base metal and solution-treated materials were exhibited similar corrosion tendency as Ran-dle equivalent cell. The value of passive film resistance was 579 ohms for the base metal and 124,770 ohms for the solutionized metal such a difference was arose by the ${{\gamma}_^'}$ precipitate on the metal surface during heat treatment. 2. The measure value of $R_p$ for heat-treated at $650^{\circ}C,\;700^{\circ}C,\;800^{\circ}C$and $850^{\circ}C$ were 97,943, 93, 111, 26,961, 15,798 and 11,780ohm respectively. Which indicated that the passive film resistance Rp was reduced as aging temperature increased due to the growth of grain size and sensitization at the grain boundary. 3. The similar tendency was exhibited for corrosion behavior of the electro-chemical corrosion polarization method and AC impedance method and confirmed that AC impedance method was useful tool for corrosion research.

• Corrosion Science and Technology
• /
• v.2 no.3
• /
• pp.117-126
• /
• 2003

Due to excellent corrosion resistance and mechanical properties, austenitic stainless steel is widely used as the material for chemical plants. nuclear power plants, and food processing facilities. But, the zone affected by heat in the range of 400 to $800^{\circ}C$ during welding loses corrosion resistance and tensile strength since Cr-carbide precipitation like $Cr_{23}C_6$ forms at the grain boundary and thereby takes place the intergranular corrosion. In this study, AISI 304 stainless steel with the added Nb of 0.3 to 0.7 wt% was solutionized at $1050^{\circ}C$ and sensitized at $650^{\circ}C$. Specimen was welded by MIG. The phase and the microstructure of the specimens were examined by an optical microscope, a scanning electron microscope, and a x-ray diffractometer. The corrosion characteristics of specimens were tested by electrolytic etching and by double loop electrochemical potentiokinetic reactivation method(EPR) in the mixed solution of 0.5M $H_2SO_4$ + 0.01M KSCN. The melting zone had dendritic structure constituted of austenitic phase and $\delta$-ferrite phase. Cr carbide at the matrix did not appear, as Nb content increased. At the grain boundaries of the heat affected zone, the precipitates decreased and the twins appeared. The hardness increased, as Nb content increased. The hardness was highest in the order of the heat affected zone>melted zone>matrix. According to EPR curve, as the Nb content decreased, the reactivation current density(Ir) and the activation current density(la) were highest in the order of the melted zone

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.93-101
• /
• 2014

This study aims to investigate the effect of heat input of outside SAW weld on low temperature toughness($-20^{\circ}C$) of inside SAW weld for API 5L X70 with sour gas resistance. As increasing heat input of the outside weld, low temperature toughness of the inside weld was decreased. Especially, in spite of the same heat input, the value of low temperature toughness was fluctuated. On the basis of fracture and microstructure analysis, the low temperature toughness is correlated with the fracture area ratio of shear lips and four kinds of fracture sections. These sections were divided with size and shape of dimple correlated with grain boundary ferrite and cleavage correlated acicular and polygonal ferrite in grain. Therefore, it was seen that these sections were two of final solidification area in the inside weld and the outside weld, no reheated zone and reheated zone in the inside weld. In conclusion, it is thought that the difference of low temperature toughness at the same heat input is due to the fact that each of impact test specimens could have the different microstructure, even though the notch was machined under the error tolerance of 1mm. It is because the final solidification area of the inside weld is very narrow.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.23-33
• /
• 1999

A finite element method was employed fort thermal and stress analyses of an IGBT module of 3-phase full bridge. The effect of material parameters such as substrate material, substrate area, solder thickness on the temperature and stress distributions of the module packages has been investigated. Thermal analysis results have also been compared by setting of boundary conditions such as equivalent heat transfer coefficient or constant temperature at a base metal surface of the package. The increase of ceramic substrate area up to 3 times does little contribution to the reduction(8.9%) of thermal resistance, while contributed a lot to the reduction(60%) of thermal stress. Thicker solder resulted in higher thermal resistance but did slightly reduced thermal stresses. It is revealed by the stress analysis that maximum stress was induced at the region of copper pads which are bonded with ceramic substrate.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.2
• /
• pp.45-54
• /
• 2019

This paper describes the results of finite element analysis (FEA), in order to investigate a characteristics of pile pullout behavior according to the conditions of the relative density and fines content in original ground. In the FEA, a boundary elements and strength reduction factors ($R_{inter}$) on pile-soil interface were applied to simulate appropriately the shear behavior at the pile-soil interface, and then the reliability of numerical analysis method was verified by comparison of FEA results and previous experimental research(You et al., 2018). In addition, a the deformation characteristics at the pile-soil interface and determination method of $R_{inter}$ value was laid out. The results showed that the FEA, based on the analytical model applied in this study simulates appropriately the characteristics of the pile-soil interface by pullout model test of pile. In order to apply the suggested $R_{inter}$ value, it is necessary to consider the condition of the relative density and the fines content in ground.

• Microbiology and Biotechnology Letters
• /
• v.47 no.1
• /
• pp.25-33
• /
• 2019

Lactobacillus rhamnosus BFE5264, isolated from a Maasai fermented milk product ("kule naoto"), was previously shown to exhibit bile acid resistance, cholesterol assimilation, and adhesion to HT29-MTX cells in vitro. In this study, we re-annotated and analyzed the previously reported complete genome sequence of strain BFE5264. The genome consists of a circular chromosome of 3,086,152 bp and a putative plasmid, which is the largest one identified among L. rhamnosus strains. Among the 2,883 predicted protein-coding genes, those with carbohydrate-related functions were the most abundant. Genome analysis of strain BFE5264 revealed two consecutive CRISPR regions and no known virulence factors or antimicrobial resistance genes. In addition, previously known highly variable regions in the genomes of L. rhamnosus strains were also evident in strain BFE5264. Pairwise comparison with the most studied probiotic strain L. rhamnosus GG revealed strain BFE5264-specific deletions, probably due to insertion sequence-mediated recombination. The latter was associated with loss of the spaCBA pilin gene cluster and exopolysaccharide biosynthetic genes. Comparative genomic analysis of the sequences from all available L. rhamnosus strains revealed that they were clustered into two groups, being within the same species boundary based on the average nucleotide identities. Strain BFE5264 had a sister group relationship with the group that contained strain GG, but neither ANI-based hierarchical clustering nor core-gene-based phylogenetic tree construction showed a clear distinctive pattern associated with the isolation source, implying that the genotype alone cannot account for their ecological niches. These results provide insights into the probiotic mechanisms of strain BFE5264 at the genomic level.

• Tribology and Lubricants
• /
• v.38 no.1
• /
• pp.8-14
• /
• 2022

Amorphous carbon (a-C) has excellent wear resistance and, therefore is used as a coating to protect numerous mechanical components to prolong their lifetimes. Among the a-C coatings, diamond-like carbon (DLC) and DLC-containing silicon (Si-DLC) receive extensive attention owing to their enhanced wear resistance and low frictional characteristics. In this study, the friction and wear characteristics of DLC and Si-DLC coatings are analyzed. For comparative analysis, DLC-coated and Si-DLC-coated vanes are utilized with the counterpart of a roller for the friction tests. Since the lubricated mechanical components are generally vulnerable to wear when a lubricant film does not form properly, friction tests are conducted under boundary lubrication conditions to promote wear. A cylinder-on-cylinder type tribometer is used to perform the friction tests with various normal load conditions. After the friction test, a 3D laser confocal microscope is used for quantifying the wear volume to calculate the wear rate of each specimen. Consequently, the DLC-coated specimen shows a lower coefficient of friction (COF) and wear rate than the specimen without the coating, while the Si-DLC coating shows a higher COF than the bare specimen. The results of this study are expected to contribute to improving the efficiency and reliability of compressors.

• Cross-Cultural Studies
• /
• v.50
• /
• pp.173-196
• /
• 2018

This study, which works to develop a method of focusing on A Quiet Dream by Zhang Lu, explored the structural differences of films and the changes in Zhang Lu's aim and perspective as noted in films, by a review to grasp his internal changes in texts and contextual factors. In A Quiet Dream, Zhang Lu made a filmic attempt that had never been made in the world of films prior to that date. He tried an aesthetic experiment on how films could reorganize the world, by using the effect of obscuring the boundary between reality and dream in films and generating a new narrative regarding filmic reality, actual reality, and the life and artistic truth of the Diaspora. Generally speaking, the changes in the narrative in A Quiet Dream seem to be his resistance against himself and the Diaspora. Thus, in the discussion about A Quiet Dream, relying on the external factors intervening in the relationship between the subject of creation and films is not a useful endeavor at this time. Consequently, it is noted that after settling down in Korea, Zhang Lu could directly approach the changes in the cultural position of films in multilayered ways, where films were the most dynamic part of his life. Due to the changes in the Diaspora, he could obscure the boundary for the first time in the world of films and experiment with how films could escape develop an interesting perspective that deviated from reality, and made a new goal to show new ideas regarding the individual's awareness of the world.