• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.67-80
• /
• 2014

The thickness of permafrost in Eastern Siberia is from 200 to 500 meters. The seasonally frozen layer can vary from 0 to 4m depending on ground temperature and its location. The shear wave velocity varies from 80m/s in summer to 1500m/s in winter depending on soil type. When melted, large impedence will occur due to the difference between the shear wave velocity of seasonally frozen soil and that of permafrost layer. Large displacement may occur at the boundary of the melted and the frozen layer, and this phenomenon should be considered in a seismic design. In this research, one-dimensional equivalent linear analyses were performed to investigate the effects of the seasonally frozen layer on ground amplification characteristics. Soil profiles of Yakutsk and Chara in Eastern Siberia were selected from geotechnical reports. 20 recorded ground motions were used to evaluate the effect of input motions. As the thickness of seasonally frozen layer and the difference in the shear wave velocity increases, the amplification is shown to increase. Peat, very soft organic soil widely distributed throughout Eastern Siberia, is shown to cause significant ground motion amplification. It is therefore recommended to account for its influence on propagated motion.

• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.173-189
• /
• 1997

A study on the geological structure and geothermal gradient distribution was carried out to evaluate the feasibility of developing a new geothermal field in the Yusong area. It is suggested that geothermal water in the Yusong area is closely related with faults, dykes, and their dipping characteristics with the study of geothermal gradient distribution. A fault of EW direction locates in northern boundary of the study area and another fault of N40{\citc}W$ crosses the EW fault at the western part of the study area. Locations of faults are recognized quite well by lineaments, geophysical exploration and geothermal gradient distribution characteristics. Three sets of dyke are found in the study area. According to the result of the geothermal gradient distribution study, the location of geothermal anomaly belt and dykes coincide each other, and the area has the temperature gradient of larger than 3$^{\circ}C$ between the depths of 0.5m and 1.0m below ground surface. The thermal anomaly belt those temperature gradient is larger than 2.5$^{\circ}C$ between the depths of 0.5m and 1.Om below ground surface is expected in the direction of N80{\citc}W$ in the study area. The dirping of dyke is almost vertical according to the linear distribution of dykes on surface and the results of geophysical survey. From the distribution of geothermal anomaly belt and the locations of dyke, three locations for the development of hot spring water could be recommended and the depth that ensure over 4$0^{\circ}C$ geotheraral water is estimated as 170~200m below the ground surface.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.1
• /
• pp.25-34
• /
• 2017

The objective of this study is to seek for improvement measures to make the Ecosystem and Nature Map by analyzing causes for grade changes and distributional characteristics of areas with public objections to the Ecosystem and Nature Map notified by e-official gazette from 2014 to June 2016. The receipt of public appeals has been recently increased from average 23 cases a year(2007-2013) to average 33 cases a year(2014-June 2016) while there were 42 areas with public appeals for less than the minimum area($62,500m^2$) for the evaluation of grade of the Ecosystem and Nature Map. Most of the public appeals focused on the 1st grade zone of the Ecosystem and Nature Map. Before grade changes by public appeals, the 1st grade zone of the Ecosystem and Nature Map were 76.0% of the whole areas with public appeals. However, after grade changes by public appeals, it was rapidly decreased to 25.2%, which means that a lot of the 1st grade zone with public appeals were lowered. In the results of analyzing the distributional characteristics of areas with public appeals, they were mostly distributed in lowland(less than 250m altitude), section with $10{\sim}20^{\circ}$ slope, and areas close to or within 100m from built-up area. Regarding areas with public appeals, the biggest time difference between the period of the existing research by National Ecosystem Survey and the period of notice after completing the treatment of public appeals was 18 years while areas showing 6-15 years of time difference were about 70%. Thus, there were huge differences in time of research and notice. Also, the biggest causes for grade changes were boundary errors caused by small-scale survey, and then followed by changes in evaluation of endangered species and occurrence of built-up area and damaged land. Analyzing areas with public appeals in each evaluation item of the Ecosystem and Nature Map, vegetation part was 73.0%, and endangered species area was 23.1% while topography and wetland was less.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.3-8
• /
• 1994

Recently, sound and mechanical vibration are becoming important problems in our life. In the present study, the measurement of vibration absorption characteristics of barium titanate ceramics and the investigation of its relationship to microstructures were carried out. The barium titanate ceramics is expected to be better vibration absorption material owing to its chemical and physical stability than other conventional vibration absorbers like glasswool board. Barium titanate ceramics were prepared by sintering fiberous $BaTiO_{3}$ crystallites in order to enhance the vibration absorption characteristics. The fiberous $BaTiO_{3}$ ceramics were prepared through the ionic exchange after the preparation of fiberous $K_2Ti_4O_9$ with 0.2$\mu\textrm{m}$, 1.2$\mu\textrm{m}$, 2.0$\mu\textrm{m}$, diameter length by KDC method. The fiberous crystallites were oriented in a plane perpendicular to the press direction and sintered. The investigation of the grain diameters of the sintered ceramics, equivalent factor, electromechanical coupling factor($k_1$), and the generated voltage(V) shows that the grain's diameter decreases with the increase of the diameter of the used fiberous crystallites. The vibration absorption increases the crystallites' diameter. That means that the vibration absorption increases with the internal friction of grain boundary. Which was identified by the investigation of the equivallent circuit.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.262-269
• /
• 2007

The blur phenomenon obscuring the boundary between the field of designers and that of users may be the key paradigm in the 21st century. However, we observed a number of chair design cases that could be considered as the results of blur pheonomenon in the furniture design field from mid 1960s. The backgrounds include the repulsion against the uniform functionalism, deliberation on the life in the future and the development of plastic materials and their processing methods. Under such backgrounds, the designers pursued the new and futuristic furniture design. In that process, what is about the "freedom" that the consumers as well as the designers should have in using the furniture was the important concept. This concept enabled the creation of chair design inducing the participation of consumers. They created various kinds of shapes, functions and structures that the consumers became interested in as if they had fun with toy blocks by mainly using the new material "plastic". In a formative aspect, the entire shape is classified into the organic shape and geometric shape. The unit types are divided into two kinds; type that the unit of simple shape is repeated only with size difference and irregular combination type of the units comprised of more than two shapes. In the functional aspect, some cases showed the transformation and expansion of the function more variously. Other cases changed the function of chairs to tables, cabinets, or objects. In the structural aspect, on the basis of the method assembling each unit, one method is to assemble using the hardware and the other is to assemble only with intrinsic units of chair. The chair design created by the blur phenomenon between the designers and the users as described above causes the blur phenomenon between the furniture and the space where the furniture is installed. Accordingly, it is expanding the furniture design sphere including the case that the furniture is not selected as the rifle article depending on the characteristics of interior space but it becomes the element leading the characteristics of space. This study aims to estimate the change of interior space and the furniture that my cause the blur phenomenon by examining the cases above appropriate for the paradigm of the 21st century. Furthermore, this study will enable the discussion oil the directions of future furniture design based on its results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.713-720
• /
• 2013

The objectives of this study are to identify whether the small area variation also exists in the oriental medicine and, if it exists, what causes, to expand our boundary of research interests on the small area variation observed at the western medicine toward the oriental medicine as one of the fundamental research foundations and to provide any fundamental findings from this study results to the healthcare politicians to promote consumer's rational behaviors for the use of healthcare. This study analyzed the health insurance claim data (2010, 2011) which were the patients of western medicine and the outpatients of the oriental medicine with the top 10 most frequent diseases and looked into the variation of healthcare utilization among the areas after grouping resident area into an 86-area category. The study result shows that the small area variation was also observed at the part of the oriental medicine in which the characteristics of patients critically affect the healthcare expenditure per visit day rather than those of providers and the characteristics of both patients and providers equally affect the healthcare expenditure per patient. Therefore, this study suggests that government set up healthcare policies on the standardization of oriental medicine to prevent its over-utilization and unmet need, enforcing the roles of oriental medicine in the markets, enhancing the appropriate health care utilization, and expanding provision and sharing the health care information to reduce unnecessary health care utilization.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.649-657
• /
• 2017

A rupture in a high-pressure pipe causes the fluid in the pipe to be discharged in the atmosphere at a high speed resulting in a supersonic jet that generates the compressible flow. This supersonic jet may display complicated and unsteady behavior in general. In this study, Computational Fluid Dynamics (CFD) analysis was performed to investigate the compressible flow generated by a supersonic jet ejected from a high-pressure pipe. A Shear Stress Transport (SST) turbulence model was selected to analyze the unsteady nature of the flow, which depends upon the various gases as well as the diameter of the pipe. In the CFD analysis, the basic boundary conditions were assumed to be as follows: pipe of diameter 10 cm, jet pressure ratio of 5, and an inlet gas temperature of 300 K. During the analysis, the behavior of the shockwave generated by a supersonic jet was observed and it was found that the blast wave was generated indirectly. The pressure wave characteristics of hydrogen gas, which possesses the smallest molecular mass, showed the shortest distance to the safety zone. There were no significant difference observed for nitrogen gas, air, and oxygen gas, which have similar molecular mass. In addition, an increase in the diameter of the pipe resulted in the ejected impact caused by the increased flow rate to become larger and the zone of jet influence to extend further.

• Journal of the Korean Society of Combustion
• /
• v.18 no.4
• /
• pp.37-43
• /
• 2013

The effects of preferential diffusion of hydrogen in interacting counterflow $H_2$-air and CO-air premixed flames were investigated numerically. The global strain rate was varied in the range $30-5917s^{-1}$, where the upper bound of this range corresponds to the flame-stretch limit. Preferential diffusion of hydrogen was studied by comparing flame structures for a mixed average diffusivity with those where the diffusivities of H, $H_2$ and $N_2$ were assumed to be equal. Flame stability diagrams are presented, which show the mapping of the limits of the concentrations of $H_2$ and CO as a function of the strain rate. The main oxidation route for CO is $CO+O_2{\rightarrow}CO_2+O$, which is characterized by relatively slow chemical kinetics; however, a much faster route, namely $CO+OH{\rightarrow}CO_2+H$, can be significant, provided that hydrogen from the $H_2$-air flame is penetrated and then participates in the CO-oxidation. This modifies the flame characteristics in the downstream interaction between the $H_2$-air and CO-air flames, and can cause the interaction characteristics at the rich and lean extinction boundaries not to depend on the Lewis number of the deficient reactant, but rather to depend on chemical interaction between the two flames. Such anomalous behaviors include a partial opening of the upper lean extinction boundary in the interaction between a lean $H_2$-air flame and a lean CO-air flame, as well as the formation of two islands of flame sustainability in a partially premixed configuration with a rich $H_2$-air flame and a lean CO-air flame. At large strain rates, there are two islands where the flame can survive, depending on the nature of the interaction between the two flames. Furthermore, the preferential diffusion of hydrogen extends both the lean and the rich extinction boundaries.

• Journal of the Korean association of regional geographers
• /
• v.15 no.4
• /
• pp.510-523
• /
• 2009

Geodemographics(GD) can be defined as an analytical approach of socio-economic and behavioral data about people to investigate geographical patterns. GD is based on the assumptions that demographical and behavioral characteristics of people who live in the same neighborhood are similar and then the neighborhoods can be categorized with spatial classifications with the geographical classifications. Thus, this paper, in order to identify the applicability of the geographical classification of the GD, explores the concepts of the geodemographics into Seoul city areas with Korea census data sets that contain key characteristics of demographic profiles in the area. Then, this paper attempt to explain each area classification profile by using clustering techniques with Ward's and k-means statistical methods. For this as as as, this paper employs 2005 Census dataset released by Korea National Statistics Office and the neighborhood unit is based on Dong level, the smallest administrative boundary unit in Korea. After selecting and standardizing variables, several areas are categorized by the cluster techniques into 13, this paps as distinctive cluster profiles. These cluster profiles are used to cthite a short description and expand on the cluster names. Finally, the results of the classification propose a reasonable judgement for target area types which benefits for the people who make a spatial decision for their spatial problem-solving.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.513-520
• /
• 2016

It is well known that volatile compounds including disinfection by-products as well as emissive dissolved gas in water can be removed effectively by air stripping. The micro-bubbles of flotation unit are so tiny as microns while the diameter of fine bubbles applied to air stripping is ranged from hundreds to thousands of micrometer. Therefore, the micro-bubbles in flotation can supply very wide specific surface area to transfer volatile matters through gas-liquid boundary. In addition, long emission time also can be gained to emit the volatile compound owing to the slow rise velocity of micro-bubbles in the flotation tank. There was a significant difference of the THMs species removal efficiency between air stripping and flotation experiments in this study. Moreover, the results of comparative experiments on the removal characteristics of THMs between air stripping and flotation revealed that the mass transfer coefficient, $K_La$ showed obvious differences. To overcome the limit of low removal efficiency of dissolved volatile compounds such as THMs in flotation process, the operation range of bubble volume concentration is required to higher than the operation condition of conventional particle separation.