• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6A
• /
• pp.592-601
• /
• 2002

A postprocessing method for blocking artifact reduction in block coded images is presented. The proposed method consists of classification, adaptive inter-block filtering, and intra-block filtering. First, each block is classified as one of seven classes according to the characteristics of 8x8 DCT coefficients. Then each block boundary is faltered by adaptive inter-block filters, which use the block classes. Finally to the blocks which are classified as edge block classes, intra-block filtering is performed. Experimental tests produced that the proposed method gives better results than the convectional methods from both a subjective and an objective viewpoint.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.18 no.2
• /
• pp.157-166
• /
• 2014

If there are metals located in the X-ray scanned object, a point outside the metals has its range of projection angle at which projections passing through the point are disturbed by the metals. Roughly speaking, this implies that attenuation information at the point is missing in the blocked projection range. So conventional projection completion MAR algorithms to use the undisturbed projection data on the boundary of the metaltrace is less efficient in reconstructing the attenuation coefficient in detailed parts, in particular, near the metal region. In order to overcome this problem, we propose the algebraic correction technique (ACT) to utilize a pre-reconstructed interim image of the attenuation coefficient outside the metal region which is obtained by solving a linear system designed to reduce computational costs. The reconstructed interim image of the attenuation coefficient is used as prior information for MAR. Numerical simulations support that the proposed correction technique shows better performance than conventional inpainting techniques such as the total variation and the harmonic inpainting.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.191-197
• /
• 2014

Purpose : This study presents the usefulness assessment of metal artifact reduction for orthopedic implants(O-MAR) to decrease metal artifacts from materials with high density when acquired CT images. Materials and Methods : By CT simulator, original CT images were acquired from Gammex and Rando phantom and those phantoms inserted with high density materials were scanned for other CT images with metal artifacts and then O-MAR was applied to those images, respectively. To evaluate CT images using Gammex phantom, 5 regions of interest(ROIs) were placed at 5 organs and 3 ROIs were set up at points affected by artifacts. The averages of standard deviation(SD) and CT numbers were compared with a plan using original image. For assessment of variations in dose of tissue around materials with high density, the volume of a cylindrical shape was designed at 3 places in images acquired from Rando phantom by Eclipse. With 6 MV, 7-fields, $15{\time}15cm2$ and 100 cGy per fraction, treatment planning was created and the mean dose were compared with a plan using original image. Results : In the test with the Gammex phantom, CT numbers had a few difference at established points and especially 3 points affected by artifacts had most of the same figures. In the case of O-MAR image, the more reduction in SD appeared at all of 8 points than non O-MAR image. In the test using the Rando Phantom, the variations in dose of tissue around high density materials had a few difference between original CT image and CT image with O-MAR. Conclusion : The CT images using O-MAR were acquired clearly at the boundary of tissue around high density materials and applying O-MAR was useful for correcting CT numbers.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.11-19
• /
• 2010

Most of deblocking filters assumes that the block boundaries are accurately known and the coding information like quantization parameters are available. In some applications such as commercial television, however, many external video inputs without known block boundary and coding information arc given. If a decompressed video sequence heavily degraded with blocking artifacts is given through the external video port, it is absolutely necessary to detect block boundaries and control the strength of deblocking filtering by analysing the given images. This paper presents an efficient method to find the block boundaries and estimate the strength of the blocking artifacts without the knowledge of coding information. In addition, the confidence of the estimated blocking artifact information is also evaluated to control the adaptive deblocking filter robustly. Experiment results show that the estimated block boundary locations and strength relative strength and confidence information are practically good enough to reduce the blocking artifacts without prior knowledge.

• Journal of Broadcast Engineering
• /
• v.23 no.3
• /
• pp.431-436
• /
• 2018

In this paper, a simple but effective algorithm to reduce the computational complexity of thumbnail generation and to improve image quality without aliasing artifacts is proposed. For the high speed decoding, the proposed algorithm performs partial decoding per $4{\times}4$ boundary in TU(Transform Unit), and preforms TU boundary in PU(Prediction Unit). The proposed method defines the weights based on intra prediction directions and estimates the thumbnail pixel by using that weights. this method remains thumbnail extraction time and improves thumbnail image quality compared with conventional algorithms.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.28-37
• /
• 2002

In this paper, we propose new methods used in MPEG codec that can improve the picture quality degradations of the reconstructed images, such as blocking artifacts, without additional computations. At first, a new 2-step MAD motion search is presented in the motion search and compensation course to reduce the computations and the errors of block boundary pixels. And we also present an overlapped 2-step MAD motion search that use the pixels beyond the block boundary using the reduced computations. In DCT/quantization course for intra-blocks, 1-D DCT predictive quantization and pixel difference predictive quantization, those use the adjacent pixel sets of the Previously reconstructed blocks and improve the inter-block continuity, are presented. As simulation results, proposed methods shows better picture qualities by reducing blocking artifacts than that of the conventional MPEG.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.264-267
• /
• 2014

본 논문에서는 High Efficiency Video Coding (HEVC)의 확장 버전에 적용된 바 있는 화면 내 블록 복사 (Intra Block Copy; IntraBC) 기술에 대해 개선 알고리듬을 제안하고 있다. IntraBC 는 화면 내 부호화 진행 시, 예측 유닛 (prediction unit; PU)단위로 현재 부호화하고 있는 코딩 트리 유닛 (coding tree unit; CTU)의 왼쪽에 위치하는 CTU 를 탐색하는 기법이다. 이때, 왼쪽 CTU 에서 가장 비슷한 블록을 찾아 그 움직임 벡터 (motion vector)를 저장 및 전송하게 된다. 제안하는 알고리듬은 움직임 벡터를 찾기 전, 왼쪽의 복원된 CTU 에 대해 특정 필터를 적용하여 블록킹 열화 (blocking artifact)를 완화시키고, 더욱 정확하고 섬세한 움직임 벡터를 찾도록 하였고, 이는 자연영상보다 스크린 콘텐츠에 더욱 적합함을 확인할 수 있었다.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.129-133
• /
• 2008

A method to reduce seam line artifact in spatial compounding of ultrasonic images is presented. Spatial compounding is a speckle reducing imaging technique in which a number of ultrasound images of a given target that have been obtained from multiple view angles are combined into a single compounded image by combining the data received from each data point in the compounded image. Since different view angle results in different view area, and the images of different view arms are combined into an image, the compounded image consists of regions with different signal to noise ratio, and the boundary lines between these regions are visible as seam lines in the compounded images. In this paper, we present an algorithm that reduces the visibility of this seam line in the spatially compounded images. Design procedure for a FIH filter is described and the results of applying the filter to in-vivo ultrasonic images are analyzed.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.126-126
• /
• 2002

Purpose： For quantitative analysis of the cardiac diseases, it is necessary to segment the left-ventricle(LV) in MR cardiac images. Snake or active contour model has been used to segment LV boundary. In using these models, however, the contour of the LV may not converge to the desirable one because the contour may fall into local minimum value due to image artifact in inner region of the LV Therefore, in this paper, we propose the new preprocessing method using K-means clustering and merging algorithms that can improve the performance of the active contour model.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.327-328
• /
• 2007

A contour shape matching based pixel motion estimation is proposed. The pixel motion information is very useful to compensate the motion artifact generated at the specific gray level contours in the moving image for subfield gray-scale display devices. In this motion estimation method, the gray level boundary contours are extracted from the input image. Then using contour shape matching, the most similar contour in next frame is found, and the contour is divided into segment unit. The pixel motion vector is estimated from the displacement of the each segment in the contour by segment matching. From this method, more precise motion vector can be estimated and this method is more robust to image motion with rotation or from illumination variations.