• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.369-374
• /
• 2014

The rice stem borer (Chilo suppressalis Walker) was one of the most destructive pest of rice for the 1960s and 1970s in Korea. Recently, it is newly recognized as a potential risk factor to the biomass yield of bioenergy crops. The current research was firstly conducted to investigate overwintering larvae population density and pattern of rice stem borer attacking Miscanthus sacchariflorus cv. Geodae 1 which is referred to as an ideal lignocellulosic bioenergy crop in Korea. Population density of larvae per $1m^2$ in stems and rhizomes at the Miscanthus experimental plots and rates of damage (wormhole, abscission) of M. sacchariflorus cv. Goedae 1 were investigated from October 2012 to March 2013. The population of larvae per $1m^2$ in stems of Miscanthus were 23, 4, 1, and 1 in October, November, December 2012, and January 2013, respectively. Over the same period, the population of larvae in basal stem rots and rhizomes were increased, whereas decreased in stems. Interestingly, the positions of larvae for overwintering in Miscanthus were confirmed to 5~10 cm below the soil surface such as basal stem rot and rhizome, whereas the most common overwintering position known in rice is a part of stem on the ground such as rice straw and rice stubble. It would suggest that the larvae gradually moved to bottom of stems and rhizomes in soil in line with decline in temperature. Moreover, the damage rates of stems per $1m^2$ were up to more than 50% in some places. In conclusion, this might be the first report that rice stem borer could affect the productivity of biomass of Miscanthus in case of mass cultivation. Moreover, it should be necessary to make a decision in insect control management for this bioenergy feedstock and other related crops.

• Korean Journal of Ecology and Environment
• /
• v.33 no.2 s.90
• /
• pp.128-135
• /
• 2000

The authors surveyed the seasonal variations of environmental factors, the distributions of heterotrophic bacteria and Anabaena cylindrica growth-inhibiting bacteria at each water layer in Daechung Reservoir to verify the role of bacteria during the extinction of bloom. Average water depth at site 1, 2, and 3 were 25.5 m, 15.0 m and 12.3 m, respectively. Water temperature showed a typical pattern seasonally. The variation of DO was relatively inverse proportional to that of water temperature, although it was irregular during summer time. DO decreased gradually to early May, fluctuated sharply after then, and followed by gradual increasement after middle of September. This variation pattern was notable at surface layer. There was remarkable difference in DO concentraion between surface layer and the other water layers during the period in which DO irregulary varied. The variation range of chlorophyll-a concentraion at surface layer in summer time was broad, and it was relatively high when DO was high. The population size of heterotrophic bacteria was high from Spring to Autumn, an declined after September when the water temperature droped rapidly. Especially this variation pattern was prominent at the surface layer. Bacteria that inhibit the growth of A. cylindrica was almost not detected by June, and its distribution increased in July. Afterward, it showed different variation pattern between each site. The distribution of A. cylindrica growth-inhibiting bacteria was higher at the middle and bottom layer than the surface layer in July and October, when it was larger at all sites for the study period. This result suggests that the antagonistic bacteria exhibit higher activity when host activity drops. These results also suggest that natural water bacteria control the distirbution of cyanobacteria, especially its activity as controller is remarkable when cyanobacterial growth declines.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.1
• /
• pp.33-43
• /
• 2003

The midwater pair trawl which is being used at present in Korea have several problems. Firstly, it is difficult to control the net height on high towing speed. Secondly, net breaking often occurs owing to floats and thirdly, the volume of net on the net drum is so large. This study is aiming for examining the possibility of application for the Korean midwater pair trawl through the model experiment of non-float midwater pair trawl. The model of non-float midwater pair trawl was manufactured as 1/100 of the full scale net which is being used in bottom pair trawl for 850ps class considering the Tauti's Similarity law. The model experiment was carried out to analyze the opening efficiency according to the variation of lower warp length and the opening efficiency was investigated between th proto type and non-float type. The results obtained can be summarized as follows ; 1. The hydrodynamic resistance of non-float type was about 10~20% smaller than that of the proto type and it increased about 1ton according to the increase of dL at the condition of the same flow speed. The resistance acting on the lower warp decreased about 5% but that of the upper warp increased according to the increase of lower warp length (dL) at the condition of the same flow speed. 2. The net height of the non-float type decreased almost linearly according as the increased of flow speed and it increased in a logarithmic functional form with the increase of the lower warp length at the condition of the same flow speed. On the decreasing rate of the net height, the non-float type was lower than the proto type and the difference of the decreasing rate was about 12% at 3.0 knot, 25% at 4.0 knot, 25% at 4.0 knot respectively when dL was 30m. 3. The net width of non-float type was not varied so much as only 2m range and was larger than that of proto type. 4. The mouth area of non-float type decreased in a exponential functional form. On the decreasing rate of the mouth area, the non-float type was lower than the proto type. The filtering volume increased in a logarithmic functional form with increasing flow speed and the filtering volume of proto type decreased steeply over 3.0knot, but that of non-float type increased until 4.0knot. 5. The optimal length of lower warp was when the value of dL was about 30m and the optimal position of front weight was at the connection point of four net pendants.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.68-76
• /
• 2008

This study examined the inhibition effects of a freshwater bivalve (Unio douglasiae) and a submerged plant (Potamogeton crispus) on the cyanobacterial bloom (Oscillatoria sp.). The experiment were conducted in aquarium $(50cm{\times}65cm{\times}120cm)$ with lake sediments in the bottom of the aquarium in 10 cm thick. Before the experiments, artificial cyanobacterial bloom was induced with the addition of lake sediment and CB medium. Total 12 transparent acrylic cylinders (${\Phi}19cm$, height 40 cm) were placed in the aquarium, and within which bivalves and plants were placed in various conditions such as the control (C), plant addition (P:5 stems), mussel addition (U:2 individuals), and both mussel and plant addition (PU: the same quantity as used in each treatment). The experiment was conducted in triplicate during 7 days. pH, dissolved oxygen (DO), electric conductivity (EC), salinity, cyanobacterial cell density, chlorophyll-${\alpha}$ concentration, and mussel filtering rate were monitored daily. At the end of the experiment, total phosphorus (TP), total nitrogen (TN), and plant height and weight were measured. Overall, a large degree of cyanobacterial growth inhibition appeared in both P and U treatments, and the effect was highest in the U treatment, followed by P and PU. The combined treatment of both U and P did not show any synergic effects compared to the effect in separated treatment. In all enclosures of the treatments chlorophyll-${alpha}$ (Chl-${alpha}$) concentration decreased until 36 hours after the additions of the plants and mussels. In contrast, Chl-${alpha}$ concentrations increased in PU enclosures after 36 hours. The same trend was shown in the cell density of Oscillatoria. pH and DO gradually decreased until 120 and 144 hours, respectively, in the P and PU enclosures. TP concentration increased in the mussel enclosures (U and PU), while TN concentration largely decreased in the plant enclosures (P and PU). Our results suggest that applied bivalve (Unio) and submerged plant (Potamogeton) seemed to have a potential effect on the growth inhibition of cyanobacteria, but their combined application may have an antagonistic effect to diminish the degree of the inhibition.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.71-80
• /
• 2011

Trickling filter has been extensively studied for the domestic wastewater treatment especially for the small scale plants in rural area. The purpose of this research is to survey the physical and microbial characteristics of wood chip media and the removal efficiency of animal wastewater using wood chip trickling filter system. The trickling filtration system comprises a filtration bed packed with wood chip media having a particle dia. of 5~7cm. The method comprises natural air from the bottom of the bed. The system also comprises a control mechanism including a time a constant discharge pump for controlling supply of the wastewater into the bed. The following conclusions were obtained from the results of this research. 1. The specific surface area of wood chip was 0.4123 $m^2$/g, pore volume was 0.0947 $cm^3$/g, density was 0.49 g/$cm^3$. It has forms of parallelogram and oblong which have numerous small pore space. This wood chip has been good condition for microorganism's habitat, having very larger specific surface area by complex the three dimension structure of cellulose at wood's major ingredients. 2. The total counts of in attached aerobic microbes were ranged from $10^6$ to $10^8$ CFU/g, and anaerobes microbial numbers were from $10^4$ to $10^7$. The aerobic microbial numbers appeared to be much more than those of anaerobic microbial numbers. 3. The average efficiency of $BOD_5$ and CODcr were 74.5% and 51.5%, respectively. The removal efficiency of T-N and T-P were 61.4%, 56.2%, respectively. But SS removal levels remain 19.3%.

• Journal of Animal Environmental Science
• /
• v.15 no.1
• /
• pp.51-58
• /
• 2009

The compost leachate was dark-colored solution that leaches out of the bottom of the compost pile. The compost leachate was rich in nutrients and can potentially used in plant culture. In the organic production, commercial liquid fertilizer was used to insure the availability of nutrients during the formation of the yield. The cost of supplemental liquid fertilizer could be reduced by developing a fertilizer based on animal fertilizer. This experiment was conducted to investigate the effect of different combination of compost leachate and conventional inorganic solution in hydroponic culture for lettuce growth. Six different treatments were applied. The compost leachate(CL) and nutrient solution(NS) were mixed by six different mixing ratios of 0:100, 20:80, 40:60, 60:40%, 80:20 and 100%:0% based on nitrogen content. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of leaf lettuce. The concentration of nutrient solution was adjusted 1.5 mS/cm in EC. The compost leachate was low in phosphorus(P), calcium(Ca), magnesium(Mg), but rich in potassium(K). The plant height of lettuce treated with CL 20+NS 80% was similar with 100% NS of control plot. Plant height was highest in the plot of CL 20+NS 80%. The treatment of 100% compost leachate was lowest in the growth characteristics of leaf lettuce. Number of leaf was very low in 100% compost leachate compared with plot of chemical nutrient solution. In the beginning of growth stage, SPAD value was reduced in plot treated with CL100%, but CL20+NS80% plot was higher compared to 100% compost leachate. SPAD value of leaf lettuce leaves was decreased as the amount of CL was increased. The dry weight of lettuce were 107.4, 104.2g in plot of NS 100% and CL 20%+NS80%, respectively. The leaf number and plant weight were decreased at high application plots of compost leachate. The leaf lettuce showed lowest in the plot treated with 100% compost leachate, and the growth of lettuce severely decreased after application of 100% CL treatment. The results showed that compost leachate can be use as liquid fertilizer for the organic hydroponic production. The mixture solution of 20% of compost leachate and 80% of nutrient solution could be used as a nutrition solution in hydroponic culture of leaf lettuce. Our studies have shown that is possible to produce using compost leachate, although growth is slower than when using a conventional inorganic hydroponic solution.

• Journal of Korean Society of Forest Science
• /
• v.27 no.1
• /
• pp.15-21
• /
• 1975

According to Yoshihisa Kuroki's report that the total amount of carotenoid was more in the susceptible to pine bark beetle, than in the resistant ones, carotenoids were extracted from needle leaves of one year old seedlings of Pinus thunbergii, Pinus desiflora, Pinus rigida, Pinus koraiensis, Pinus rigitaeda and Pinus taeda which are all important pines in Korea, to find their resistant ratio to the insect. The carotenoids were analyzed and compared using the spectra of them by spectrophotometer. The results were as follows: 1. The visible absorption spectra of carotenoids in those pine trees were proved to be very similar. 2. The total amount of carotenoids in needles differed with the tree species and the contents were arranged in decreasing order P. koraiensis>P. rigida>P. thunbergii>P. rigitaeda>P. taeda, it seemed that there was corelation between the cartenoid content and the extent of harm caused by the pine bark beetles except P. koraiensis. 3. But carotenoids were contained in Robinia pseudoacacia, Castanea crenata, Chamaecyparis obtusa and Cedrus deodra leaves too. 4. The total amounts of carotenoids in these pines of 9 species were arranged in decreasing order Robinia pseudoacacia>Pinus koraiensis>Pinus rigida>Pinus thunbergii>Castanea crenata>Pinus rigitaeda>Pinus taeda>Chamaecyparis obtusa>Cedrus deodara. Therefore, it was proved that there was no correlation between carotenoid cotent and extent of resistance to the insect. 5. In the thin-layer chromatography of these carotenoids, 13 kinds of components in P. densiftora, P. koraiensis and P. rigida and 12 kinds of spots in other pines, were detected respectively, under ultra-violet fluorescent lamp $3,600{\AA}$ and $2,537{\AA}$. 6. The eighth spots from the bottom in P. densiflora, P. koraiensis and P. rigida were not found in other pines and other 4 species (Robinia pseudoacacia, Castanea crenata, Chamacyparis obtusa, Cedrus deodra). Especially the spot in P. densiflora fluoresced strong cobalt blue-fluorescence under ultra-violet fluorescent lamp $2,537{\AA}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.61-71
• /
• 1971

This study was conducted in order to investigate the effects of slaked lime and borax on the Akiochi paddy field. The pot trial(slaked lime was treated 0, 6, 10, 15g and borax 0, 0.75, 1.5g per pot) and the field trial(slaked lime was treated 0, 100, 200kg and borax 0, 10, 30, 50kg per 10are) respectively. The results are summarized as fo11ows. I. Pot Trial: 1. In a heavy treated of borax, appeared chlorosis on whole leaves(bottom) in early growing stage, However, in about 25 days after transplanting, these chlorosis were disappeared gradually. And in proportion to close by maturity after the ear-heading, changed to dark brown color and rolled at the end of upper leaves, finally withered. At the same time the part of the end of grains was also colored to dark brown. 2. Slaked lime effected to increase the ti1lering, hence increased the number of ear, on the other hand, borax showed the tendency of repression the tillering, conversely. 3. Borax effected to hurried up to heading date of rice plant, to which borax had been the plot of B$_1$ to 3 days and B$_2$ to 5 days, hurried up than control respectively, regardless of the quantities of slaked lime application. 4. According to the application of borax, the length of culm were shortened, otherwise the length of panicle were longished, then no recognized the. independent effect of slaked lime. 5. The number of grains per panicle were seemed like increased by treatment of slaked lime, but the grain were decreased in the heavy treatment of slaked lime and borax. These phenomena were showed in ratio of maturity likely tendency as above. 6. In the 1, 000 grains weight of brown rice, in the case of slaked lime was almost no significant, otherwise by increase the application of borax, increased the weight of 1, 000 grains and the size of the grains was greater. 7. The weight of rough rice and straw were showed the same tendency as the number of grains and maturity ratio. particularly, showed the phenomenon of the reduction by the heavy application of borax. II. Field trial: 1. In a heavy treated of borax, appeared chlorosis in a early growing stage, according to close by maturiting date after the ear-heading changed to dark brown the end of upper leaves, finally dried. 2. Slaked lime application accelerated the growth and increased the number of ear, but borax showed the tendency of repression the tillering. 3. Borax effected to hurried up to heading date of rice plant, according to heavy treatment of borax quickened heading date for 4 to 5 days. 4. As a whole, culm length was repressed by borax treatment. 5. Borax application 10kg per 10are advanced progress the maturity, but in the case of above 30kg per 10are of borax showed the tendency obstruction the maturity. 6. The yield of rough rice and brown rice recognized the independent effect of slaked lime and borax, respectively. the yield was decreased by the abundant of borax.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.503-514
• /
• 2011

In this research, the seismic connection details for two concrete-filled U-shape steel beam-to-H columns were proposed and cyclically tested under a full-scale cruciform configuration. The key connecting components included the U-shape steel section (450 and 550 mm deep for specimens A and B, respectively), a concrete floor slab with a ribbed deck (165 mm deep for both specimens), welded couplers and rebars for negative moment transfer, and shear studs for full composite action and strengthening plates. Considering the unique constructional nature of the proposed connection, the critical limit states, such as the weld fracture, anchorage failure of the welded coupler, local buckling, concrete crushing, and rebar buckling, were carefully addressed in the specimen design. The test results showed that the connection details and design methods proposed in this study can well control the critical limit states mentioned above. Especially, the proposed connection according to the strengthening strategy successfully pushed the plastic hinge to the tip of the strengthened zone, as intended in the design, and was very effective in protecting the more vulnerable beam-to-column welded joint. The maximum story drift capacities of 6.0 and 6.8% radians were achieved in specimens A and B, respectively, thus far exceeding the minimumlimit of 4% radians required of special moment frames. Low-cycle fatigue fracture across the beam bottom flange at a 6% drift level was the final failure mode of specimen A. Specimen B failed through the fracture of the top splice plate of the bolted splice at a very high drift ratio of 8.0% radian.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.88-89
• /
• 2013

A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.