• Corrosion Science and Technology
• /
• v.17 no.3
• /
• pp.91-100
• /
• 2018

Development of biodegradable implants for treatment of complex bone fractures has recently become one of the priority areas in biomedical materials research. Multifunctional corrosion resistant and bioactive coatings containing hydroxyapatite $Ca_{10}(PO_4)_6(OH)_2$ and magnesium oxide MgO were obtained on Mg-Mn-Ce magnesium alloy by plasma electrolytic oxidation. The phase and elemental composition, morphology, and anticorrosion properties of the coatings were investigated by scanning electron microscopy, energy dispersive spectroscopy, potentiodynamic polarization, and electrochemical impedance spectroscopy. The PEO-layers were post-treated using superdispersed polytetrafluoroethylene powder. The duplex treatment considerably reduced the corrosion rate (>4 orders of magnitude) of the magnesium alloy. The use of composite coatings in inducing bioactivity and controlling the corrosion degradation of resorbable Mg implants are considered promising. We also applied the plasma electrolytic oxidation method for the formation of the composite bioinert coatings on the titanium nickelide surface in order to improve its electrochemical properties and to change the morphological structure. It was shown that formed coatings significantly reduced the quantity of nickel ions released into the organism.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.7
• /
• pp.1038-1047
• /
• 2008

This study aimed at targeting fixed increases in body weight (100 g/wk) by quantitatively regulating energy allowances (ME) in broiler breeders from 5 to 20 wks of age. Four energy regimes were tested: 1. The energy required for maintenance, activity and growth was calculated for 100 g increases in body weight/wk and a measured quantity of grower diet (160 g protein and 2,600 kcal ME/kg) was offered to the control group (ME-100) to achieve the anticipated weight gain. The energy allowances increased with age from 132 to 294 kcal/d. 2. Additionally, three energy regimes were considered, quantitatively reducing ME by 10% (ME-90) or 20% (ME-80) and increasing by10% (ME-110) over the control group. Each test group had 23 replicates5 female chicks housed in cages. The influence of energy regimes and age on growth, nutrient digestibility, carcass attributes, bone parameters and stress was evaluated at 4 wk intervals. Quantitative ME restriction by 10% (119-265 kcal/d) produced an average weight gain of 98.1 g/wk, which was closer to the targeted increase of 100 g/wk, whereas the control group attained it nine days earlier. Restriction of energy by 10 or 20% produced better conversion efficiency of feed, energy and protein and apparent digestibility of protein, Ca and P than 10% excess ME. Energy regimes did not influence eviscerated meat yield, but higher energy allowances (ME-110) significantly increased abdominal fat pad and liver weights and decreased giblet weight, percent muscle protein and tibia ash. Relatively higher stress was recorded in ME-restricted groups, as reflected by wider heterophil and lymphocyte ratios and increased bursa weight. Early age (5-12 wk) significantly influenced bone mineralization, conversion efficiency of feed, energy and protein and apparent digestibility of protein, Ca and P, while later ages (13-20 wk) increased eviscerated meat yield, abdominal fat, tibia weight and muscle protein and reduced stress. Energy regime x age interactions were significant and are discussed. In conclusion, the synthetic broiler line used in our study responded positively to controlled energy feeding during the rearing period. Breeders offered 119-265 kcal/d, a reduction of 10% energy over the control group, were more effective in regulating grower performance than the latter. In addition to energy regimes, age intervals also exhibited significant influence on specific parameters during the grower phase.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.4
• /
• pp.263-271
• /
• 2016

Background: Bone injury is common in many clinical situations, such as surgery or trauma. During surgery, excessive reactive oxygen species (ROS) production decreases the quality and quantity of osteoblasts. Remifentanil decreases ROS production, reducing oxidative stress and the inflammatory response. We investigated remifentanil's protective effects against $H_2O_2$-induced oxidative stress in osteoblasts. Methods: To investigate the effect of remifentanil on human fetal osteoblast (hFOB) cells, the cells were incubated with 1 ng/ml of remifentanil for 2 h before exposure to $H_2O_2$. For induction of oxidative stress, hFOB cells were then treated with $200{\mu}M$ $H_2O_2$ for 2 h. To evaluate the effect on autophagy, a separate group of cells were incubated with 1 mM 3-methyladenine (3-MA) before treatment with remifentanil and $H_2O_2$. Cell viability and apoptotic cell death were determined via MTT assay and Hoechst staining, respectively. Mineralized matrix formation was visualized using alizarin red S staining. Western blot analysis was used to determine the expression levels of bone-related genes. Results: Cell viability and mineralized matrix formation increased on remifentanil pretreatment before exposure to $H_2O_2$-induced oxidative stress. As determined via western blot analysis, remifentanil pretreatment increased the expression of bone-related genes (Col I, BMP-2, osterix, and $TGF-{\beta}$). However, pretreatment with 3-MA before exposure to remifentanil and $H_2O_2$ inhibited remifentanil's protective effects on hFOB cells during oxidative stress. Conclusions: We showed that remifentanil prevents oxidative damage in hFOB cells via a mechanism that may be highly related to autophagy. Further clinical studies are required to investigate its potential as a therapeutic agent.

• Journal of Life Science
• /
• v.17 no.10
• /
• pp.1321-1329
• /
• 2007

Deer antler tissue contains the most rapidly growing bone in the animal kingdom. Thus, it is likely that growing antler tissue is a rich source of local paracrine bone-stimulating factors. Growth factors, at least the insulin-like growth factor (IGF), control the bone-remodelling process. In this study, we tried to isolate and purify IGF-I from fresh antler tissue by the routine isolation and purification of protein. The purification involved ammonium sulfate precipitation, DEAE-Sepharose CL-60 ion-exchange chromatography, CM-Sepharose CL-6B ion-exchange chromatography, and Sephadex G-50 chromatography. Purified fractions from each step were analyzed by high-performance liquid chromatography (HPLC), SDS polyacrylamide gel electrophoresis (SDS-PACE), Dot-blot, and Western-blot methods. Furthermore, the quantification of partially purified IGF-I was calculated by enzyme-linked immunosorbent assays (ELISA) using antibody to human recombinant IGF-1. SDS-PAGE analysis of the final fraction yielded two molecular bands and the signal band was at 12 kDa on the Western-blot film. This purified IGF-I fraction showed a peak at retention time of eight min. The quantity of IGF-I in 20 g deer antler tissue as starting weight was calculated using a standard curve to be 2910 ng/ml, and total IGF-I amount is 0.291 g. The results show that IGF-I, which can be found in deer antler, can be partially purified and quantified by classic protein isolation methods.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.39-50
• /
• 2001

In proceeding with orthodontic treatment, the prediction for the shape, growth rate and growth direction of mandible plays a major role to set up the treatment plan and determine its period and prognosis. Various approaches being made so far have shown that the linear and angular measurement using lateral cephalograms are relatively accurate to estimate them. This study was purposed to find the shape of mandible more clearly by preventing the overlap of the Condyle head area which appears in lateral cephalogram, and to estimate its growth rate by comparing the growth quantity and ratio via lateral area measurement. This experimental was performed against 40 patients total, of which Class I of 14, Class II of 9 and Class III of 17 consist. Wide open lateral cephalograms of 40 patients were taken over average period of 4 Year 3 Months, then the linear and angular measurements were carried out with 11 itemized lists. Autocad Rl4 application program was utilized to draw their appearance, measure and compare their lateral area. As a result of study, conclusions were made as follows; 1. Mandibular body length (gonion-menton) tended to increase in order of CIII, CI and CII, and Mandibular body length of CIII group had a tendency to grow twice faster than that of CII group. 2. In lateral items such as Go-Me, A-Cd, B-Cp, E-F and G-H, CIII showed a significant increase on the year-average quantity and rate of the growth, and especially apparent difference was observed in CIII group rather than CII group. 3. For the 4 Year 3 Months period, the year-average growth quantity of lateral area of the mandible was $1.0cm^2$ for Class I, $0.8cm^2$ for Class II and $1.4cm^2$ for Class III, which corresponds to $11.9\%,\;11.8\%\;and\;20.3\%$ of growth ratio respectively. Thus, growth ratio almost 2 times more than other groups was observed in group CIII while growth ratio between group CI and CII has little difference. 4. Considering the results as above, it can be proposed that the difference in size of the mandible between groups is caused by the difference in the growth rate and growth quantity of the mandible, which generated in the middle of growth, rather than the difference in size of congenital Jaw-bone.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.933-938
• /
• 2007

An experiment was conducted to study the laying performance, shell quality, bone mineralization, hatchability of eggs and performance of progeny (weight at day one and 14 d of age, P content in day old chick, leg score and survivability of chicks) of synthetic broiler breeders fed different levels of non-phytate phosphorus (NPP). Six levels of NPP (1.2, 1.8, 2.4, 3.0, 3.6 and 4.2 g/kg diet) at a constant calcium (Ca) level (30 g/kg) in a maize-soya-deoiled rice bran based diet were tested. Levels of dicalcium phosphate, shell grit and deoiled rice bran were adjusted to achieve the desired levels of NPP and Ca. Each level of NPP was fed with a weighed quantity of feed (160 g/b/d) to 40 female broiler breeders from 25 to 40 weeks of age housed in individual cages. Each bird was considered as a replicate. Egg production, feed/egg mass, body weight, egg weight, shell weight, shell thickness, egg specific gravity, serum Ca content and tibia breaking strength were not influenced (p>0.05) by the variation in dietary NPP levels tested. Increasing the dietary levels of NPP did not influence the hatchability of eggs, phosphorus (P) contents both in egg yolk and day old chick, chick body weight at day one and 14 d of age, leg score and survivability of chicks up to 14 d of age. Maximum response ($p{\leq}0.01$) in shell breaking strength, tibia ash and serum inorganic P contents were observed at NPP levels of 2.09, 2.25 and 3.50 g per kg diet, respectively. The retention of Ca increased, while the P retention decreased ($p{\leq}0.01$) with increasing dietary levels of NPP. Though maximum responses in shell breaking strength, bone ash and serum inorganic P were observed at NPP higher than 1.2 g/kg diet, the broiler breeder performance in terms of egg production, shell quality, hatchability of eggs and progeny performance and their survivability was not influenced by dietary NPP concentrations. It is concluded that synthetic broiler breeders maintained in cages do not require more than 1.2 g NPP/kg diet with a daily intake of 192 mg NPP/b/d during 24 to 40 weeks of age.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.182-206
• /
• 2003

Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

• Journal of Yeungnam Medical Science
• /
• v.20 no.1
• /
• pp.45-52
• /
• 2003

Background: Immediate implant placement has become an acceptable treatment for the edentulous area. The advantages of the immediate implant placement include considerable decrease in time from tooth extraction to placement of the finial prosthesis, fewer surgical procedures, and better acceptance of the overall treatment plans. But the success is dependent on the quantity and quality of the extraction socket. The purpose of this study is to evaluate the success of the immediate implant placement. Materials and Methods: Twenty-one sites in 16 patients were selected for the evaluation of the immediate implant placement. All of the cases were followed using clinical and radiographic examinations. Criteria of success were the absence of peri-implant radiolucency, mobility, and persistent pain or sign of infection. Results: Of the 21 implants, 13 implants have been succeeded. Of the 13 implants, 10 implants were replaced for the periodontal disease and 3 implants were replaced for the trauma. Conclusion: The criteria of the success in immediate implant placement are as follows. 1) Implants placed into fresh extraction sockets have a high rate of survival. 2) Implant should be placed as close as possible to the alveolar crest. 3) Implant placed into available bone beyond the apex have a high success rate.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.300-304
• /
• 2017

An implant-supported fixed dental prosthesis (ISFDP) or an implant-supported overdenture (IOD) are good options when treating a completely edentulous jaw opposing natural teeth. However, an ISFDP for a full arch requires sufficient bone quality and quantity, which limits its application. Meanwhile, using an ISFDP as an abutment of a removable partial denture has been considered recently. This clinical report discusses the treatments applied to two patients with edentulous maxillas and opposing natural teeth: one was treated with an IOD and the other was treated with an ISFDP and removable partial denture. Follow-up and management were performed for 8 years.

• Journal of Periodontal and Implant Science
• /
• v.44 no.1
• /
• pp.8-12
• /
• 2014

Purpose: The aim of this retrospective chart review was to evaluate the four-year survival rate of a titanium implant system. Methods: A total of 352 sand-blasted, thermally acid-etched titanium implants were inserted into 181 partially or completely edentulous patients. Their cumulative survival rate was evaluated retrospectively. Associated factors, such as the implant distribution and treatment type were included in the evaluation. Results: The implants were equally distributed between the maxilla (52.3%) and the mandible (47.7%). 48 implants (13.6%) were placed in the anterior region and 304 implants (86.4%) in the posterior region. The majority of the implants were inserted into bone of type II and III quality (89.8%) and volume (quantity B and C, 87.2%). Most of the implants (70.7%) were restored as single crowns; 28.7% supported a bridge construction and 0.6% a full denture. Only one implant failed, resulting in a four-year cumulative survival rate of 99.7%. Conclusions: The implant system showed an excellent four-year survival rate. It proved to be a safe and predictable means for restoration of the dentition in partially or completely edentulous patients.