• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.868-872
• /
• 2005

Individual management of the animal is the first step towards reaching the goal of precision livestock farming that aids animal welfare. Accurate recognition of each individual animal is important for precise management. Electronic identification of cattle, usually referred to as RFID (Radio Frequency Identification), has many advantages for farm management. In practice, however, RFID implementations can cause several problems. Reading speed and distance must be optimized for specific applications. Image processing is more effective than RFID for the development of precision farming system in livestock. Therefore, the aim of this paper is to attempt the identification of cattle by using image processing. The majority of the research on the identification of cattle by using image processing has been for the black-and-white patterns of the Holstein. But, native Japanese and Korean cattle do not have a consistent pattern on the body, so that identification by pattern is impossible. This research aims to identify to Japanese black cattle, which does not have a black-white pattern on the body, by using image processing and a neural network algorithm. 12 Japanese black cattle were tested. Values of input parameter were calculated by using the face image values of 12 cows. The face was identified by the associate neural memory algorithm, and the algorithm was verified by the transformed face image, for example, of brightness, distortion, noise and angle. As a result, there was difference due to a transformation ratio of the brightness, distortion, noise, and angle. The algorithm could identify 100% in the range from -30 to +30 degrees of brightness, -20 to +40 degrees of distortion, 0 to 60% of noise and -20 to +30 degree of angle transformed images.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.9 no.1
• /
• pp.65-73
• /
• 2003

The researches for tumor and the developments for new anti-tumor medicine are being continuously developed in the oriental as well as the west. The principles therapy of anti-tumor activity was based on knowledge of the method of support the healthy energy and strengthen the body resistance, promote blood circulation to remove blood stasis, clear away heat and toxic materials, dissipate phlegm and disperse the accumulation of evils. But the major clinical features of tumor was to be considered in developing a treatment plan include (1) distinguish between clinical and pathologic staging - acute and chronic, (2) classification of pathologic pattern, and (3) distinction of body situation : for examples asthenia - sthenia etc. It was most important to distinguish between supporting the healthy and eliminating the evil factors and to treat differently at the root and the branch cause of a neoplasm. In clinical study and experimental study, the effects of oriental medicine could be summarized as three that were decreasing toxicity of chemo-therapy, directly suppressing and killing cancerous cell and increasing chemo-effect through preventing metastasis. Improving organic immunity with oriental medicine could be summarized as five that were promoting phagocytosis of macrophage, inducing interferon, promoting formation of immnoglobulin, increasing number of T-cell and promoting transformation of lymphocyte. It is suggested that effective use of immune activating herbs inhibited metastasis and decreased recurrence and then we were able to expect increasing survival rate and improving clinical symptoms and quality of life(QOL) of tumor patients.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.905-909
• /
• 2010

Two sets of data on carcass traits and beef cut parameters were used to investigate the relationships between carcass and beef cut measurements, which can be used to make predictions of retail cut percentages. One set had a total of 1,141 measurements of Hanwoo cattle of three different sex origins, which were slaughtered in an abattoir located at the National Institute of Animal Science, RDA, Korea from 1996 to 2008. To develop prediction models for retail cut percentage with higher accuracies than the current model, another set consisting of a total of 13,389 records of carcass and beef cut traits were collected from 30 abattoirs and butcheries in Korea from 2008 to 2009. Bulls yielded heavier and leaner carcasses than steers. High correlation coefficients were estimated between amount of body fat and percent retail cut (-0.82) as well as between back fat thickness (BF) and percent retail cut (-0.62). The amount of retail cut, however, was highly correlated with body weight before slaughter (BW, 0.95) or with cold carcass weight (CWT, 0.94). Relationships between percent retail cut and measurable beef yield traits, BF, loin eye area (LEA) or CWT varied by sex class, which must be considered for development of a prediction model with high accuracy. Models of data for all breeds and sexes fit the effects of breed, sex, and interaction of abattoir by butchers, whereas models of data for each breed and sex fit the effect of interaction of abattoir by butcher only. Due to possible future changes in back fat control, we performed a log transformation of BF. Our new models fit better than the currently used model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.3
• /
• pp.248-257
• /
• 2011

In the present study, we proposed a new numerical wave tank model to analyze the vertical tension-leg circular floating bodies, using a 2-D Navier-Stokes solver. An IBM(Immersed Boundary Method) capable of handling interactions between waves and moving structures with complex geometry on a standard regular Cartesian grid system is coupled to the VOF(Volume of Fluid) method for tracking the free surface. Present numerical results for the motions of the floating body were compared with existing experimental data as well as numerical results based on FAVOR(Fractional Area Volume Obstacle Representation) algorithm. For detailed examinations of the present model, the additional hydraulic experiments for floating motions and free surface transformations were conducted. Further, the versatility of the proposed numerical model was verified via the numerical and physical experiments for the general rectangular floating bodies. Numerical results were compared with experiments and good agreement was archived.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.105-115
• /
• 2005

This study was investigated the kinematic factors of the last approach strides and. take off motion for the skill improving of BKH elite male athlete. 'The subjects chosen for the study were BKH and. KASZCZYK Emillian male athletes who were participated in 2003 Dae-Gu Universiad Games. Three high speed video cameras set in 60frames/s setting were used. for recording from the last approach strides to the apex position. After digitizing motion, the Direct Linear Transformation(DLT) technique was employed to obtain 3-D position coordinates, The kinematic factors of the distance, velocity and angle variable were calculated for Kwon3D 3.1. The following conclusions were drawn; 1. It showed longer stride length, as well as faster horizontal and lateral velocity than the success trial during the approach phase. For consistent of the approach rhythm, it appeared that the subject should a short length for obtain the breaking force by the lower COG during the approach phase. 2. The body lean angle showed a small angle by a high COG during the take-off phase. For obtain the vertical displacement of the COG and a enough space form the bar after take-off, it appeared that the subject should increase the body lean angle. 3. For obtain the vertical force during the takeoff phase, it appeared that the subject should keep straight as possible the knee joint. Therefor, the subject can be obtain a enough breaking force at the approach landing.

• The Journal of Internal Korean Medicine
• /
• v.24 no.2
• /
• pp.315-328
• /
• 2003

This study was performed to investigate the effect of Bunsimgieum on antitumor effect after sarcoma-180 cells transplantation into peritoneal cavity or left groin and immune responses on the depressed immunity induced by methotrexate in mice. The Bunsimgieum extract of 10mg/kg was orally administered 14 days for antitumor effects and 21 days for immune responses. 50% inhibitory concentration($IC_{50}$) of SUN-1, SUN-C4, and SUN-396 cancer cell, mean sunvival days and body weight of tumor bearing mice, and growth of tumor mass for antitumor effect; delayed type hypersentivity, hemagglutinin titer, hemolysis titer, rosette forming cells, natured killer cell activity, lymphocyte transformation, productivity of interleukin-2, and phagocytic activity for their immune responses were measured in ICR mice. Significance in antitumor effect is noted in the enlongation of mean life days and inhibition of tumor growth(p<0.01, respectively). Significance of immune responses is also noted in hemolysis titer, lymphocyte transfumotion, IL-2 productivity, phagocytic activity, and natural killer cell activity at E/T ratio 100:1(p<0.01, respectively). Significant in rosette cell formation was seen at dosage of 20mg/kg(p<0.01). However, Difference of body weight as antitumor effect, delayed type hypersensitivity, and hemagglutinin titer were not shown significantly. According to the above results, it could be suggested that Bunsimgieum has prominent antitumor and immunity enhancing effect.

• Korean Journal of Metals and Materials
• /
• v.49 no.11
• /
• pp.845-852
• /
• 2011

The Spark Plasma Sintering(SPS) method offers a means of fabricating a sintered-body having high density without grain growth through short sintering time and a one-step process. A titanium compact having high density and purity was fabricated by the SPS process. It can be used to fabricate a Ti sputtering target with controlled parameters such as sintering temperature, heating rate, and pressure to establish the optimized processing conditions. The compact/target(?) has a diameter of ${\Phi}150{\times}6.35mm$. The density, purity, phase transformation, and microstructure of the Ti compact were analyzed by Archimedes, ICP, XRD and FE-SEM. A Ti thin-film fabricated on a $Si/SiO_2$ substrate by a sputtering device (SRN-100) was analyzed by XRD, TEM, and SIMS. Density and grain size were up to 99% and below $40{\mu}m$, respectively. The specific resistivity of the optimized Ti target was $8.63{\times}10^{-6}{\Omega}{\cdot}cm$.

• Journal of Fashion Business
• /
• v.23 no.1
• /
• pp.37-48
• /
• 2019

WKSF (Warp-knitted spacer fabrics) knitted using a double Raschel machine is the three-dimensional knit that has vertically connected separate layers in loop structures. Because of its unique structure, the fabric is light, compressible and breathable. Owing to the high production speed, the use of the fabric is increasing in various areas. The purpose of this study is to establish the design process in the utilization of WKSF program and analyze the difference between WKSF and Neoprene as garment materials.. The study on the design related to WKSF has rarely been carried out because of the complexity of WKSF structure and the difficulties encountered in analyzing the structure and thread. Therefore, checking beforehand the simulation results similar to a final knit using the CAD program for WKSF can only enhance the efficiency of the design for the light knits. The conclusion drawn after designing the light knits using the CAD program and analyzing the pros and cons of WKSF through the various property evaluation techniques is as follows. The tension characteristic analysis results indicated that Neoprene specimen has the elastic transformation and resilience, thus behaving like an elastic product such as rubber. By contrast, in the event that clothing and fashion accessories are designed with WKSF, these products are kept in a boxy style fit so that the fabric can be applied flexibly to a curvy body line. In addition, WKSF is good in forming noticeably around a curvy body, because its resistance shear deformation is lower than that of Neoprene.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.33-49
• /
• 2002

This study was intended to provide basic materials for golf coaching by somatotype by analyzing and comparing the kinematic factors found in each somatotype at the time of golf swing. For this purpose, the somatotype was divided into endomorph, mesomorph and ectomorph in reference to the weight, height and upper arm circumference of each of nine professional golfers. Each of their swing motions was videotaped with the camcorder and their swing motion was analyzed by dividing it into 8 sections. The time required for the swing motion, the displacement of the center of the human body and the rotation angle of the upper body were calculated through the three-dimensional image analysis based on the DLT(Direct Linear Transformation). Based on the findings of this study, the following conclusion was drawn: The endomorphic golfers showed the longest required golf swing time, followed by the mesomorphic golfer and then the endomorphic golfer. The displacement of left-to-right movement was largest in the mesomorphic golfers, followed by the endomorphic golfers the up-to-down displacement was upward at the time of impact and that the endomorphic and mesomorphic golfers raised the sense of stability by maintaining an almost uniform height at the time of impact. As for the rotational angle of the upper body and the rotational angle of the thigh, the upper body and the thigh took a form of rotating earlier in the ectomorphic golfers at the time of impact, who showed a somewhat different characteristics compared to the endomorphic and mesomorphic golfers. It is necessary to investigate the movement of more fundamental forces in presenting the theory related to the kinematic characteristics of this swing by somatotype. Accordingly, it is thought that it is necessary to analyze the center of pressure(COP) using the ground counterforce in the future study.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.113-119
• /
• 2012

Purpose: Zirconia blocks for all ceramic dentures are divided into two groups. One is pre-heated block and the other is binder added block. In this study, the possibility of recycling the remained parts of binder added block after CAD/CAM machining with slip casting process was investigated. Methods: Owing to the binder added block contain large amount of organic matter, Binder burn-out was must be carried out before ball milling for preparing the casting slip. Binder burn-out was accomplished at $600^{\circ}C$ for 10 hours. Ball milling was performed with 5mm zirconia ball and 60mm polyethylene bottle. From 0% to 5% at 1% intervals of alumina was added to zirconia powder for preparing slip. Solid casting was achieved with plaster mold. Cast bodies were dried and sintered at $1,500^{\circ}C$ for 1 hour. Linear shrinkage, apparent porosity, water absorption, bulk density, and flexural strength were tested. Microstructures were observed by SEM, EDS and XRD analysis were executed. Results: Optimum slips for casting was prepared with 300g ball, 100g powder, and 180g distilled water. Cast body without alumina showed 26% of linear shrinkage, 6.07 of apparent density, and 470MPa of three point bend strength. On the other hand, as received zirconia block, which was sintered at the same conditions, showed 23% of linear shrinkage, 6.10 of apparent density, and 680MPa of three point bend strength. When 3% of alumina was added to zirconia, sintered body showed 23% of linear shrinkage, 6.10 of apparent density, and 780MPa of three point bend strength. SEM photomicrographs and EDS analysis showed alumina particles uniformly dispersed in zirconia matrix, and XRD analysis showed no phase transformation of tetragonal zirconia particles was occurred when alumina was added. Conclusion: According to the all of this experimental results, 3% of alumina added cast zirconia body showed excellent mechanical properties more than as received binder containing zirconia block.