• 산업경영시스템학회지
• /
• 제38권2호
• /
• pp.1-7
• /
• 2015

As a measure of health, the percentage of body fat has been utilized for many ergonomist, physician, athletic trainers, and work physiologists. Underwater weighing procedure for measuring the percentage of body fat is popular and accurate. However, it is relatively expensive, difficult to perform and requires large space. Anthropometric techniques can be utilized to predict the percentage of body fat in the field setting because they are easy to implement and require little space. In this concern, the purpose of this study was to find a regression model to easily predict the percentage of body fat using the anthropometric circumference measurements as predictor variables. In this study, the data for 10 anthropometric circumference measurements for 252 men were analyzed. A full model with ten predictor variables was constructed based on subjective knowledge and literature. The linear regression modeling consists of variable selection and various assumptions regarding the anticipated model. All possible regression models and the assumptions are evaluated using various statistical methods. Based on the evaluation, a reduced model was selected with five predictor variables to predict the percentage of body fat. The model is : % Body Fat = 2.704-0.601 (Neck Circumference) + 0.974 (Abdominal Circumference) -0.332 (Hip Circumference) + 0.409 (Arm Circumference) - 1.618 (Wrist Circumference) + $\epsilon$. This model can be used to estimate the percentage of body fat using only a tape measure.

• 대한방사선치료학회지
• /
• 제17권2호
• /
• pp.147-153
• /
• 2005

목 적 : TBI의 자세 잡이 과정에서 실시하는 신체 계측과 보상체 제작 과정을 전산화 단층 모의치료기를 이용하고 그 유용성을 평가하고자 한다. 대상 및 방법 : 환자는 누운 자세를 취하고, 전산화 단층 모의치료기를 통해 영상을 얻었다. 이 영상을 Somavision으로 전송하고 영상을 통하여 신체 계측 점에 대해 계측을 하였다. 계측은 피부를 기준으로 계측을 하고, 폐에 대해서 영상을 이용하여 계측을 하였다. 영상으로 계측된 값을 통해 보상체 두께를 결정하였다. 또한 영상을 통한 보상체 위치를 결정하 고 확인하였다. 선량은 치료실에서 열형광소자를 이용하며 측정하였다. 결 과 : 신체 계측점에서 두께에 대하며 $1{\sim}2cm$의 일반 계측과 영상 계측의 차이를 보였다. 신체 길이는 일반 계측과 영상 계측이 $3{\sim}4cm$의 차이가 있었다. 또한, 영상을 통해 보상체의 밑그림을 그릴 수 있었다. 열형광소자를 이용한 선량 측정 결과 값은 머리, 목, 액와 ,가슴(폐 포함), 무릎 부위는 $92{\sim}98%$로 측정되었고 배, 골반, 서혜부, 발 부위는 $102{\sim}109%$로 측정되었다. 결 론 : TBI의 자세 잡이 과정에서 전산화 단층 모의치료기의 영상을 이용하는 것은 유용하였다. 신체 계측 점두께는 일반 계측과 영상계측의 차이가 적게 계측되었고, 길이에 대한 계측은 정확하게 이루어졌다. 영상을 이용한 계측은 신체 밀도까지 고려한 다양한 보상체 제작이 가능성을 보여주었다. 또한 보상체 위치 잡이를 정확하게 할 수 있고, 보상체의 모 양도 제한 받지 않고 쉽게 제작할 수 있다. 전체적인 치료실 자세 잡이 시간을 $15{\sim}20$분 단축할 수 있었고, 보상체 제작 시간은 약 15분 감소시켰다.

• 대한기계학회논문집A
• /
• 제20권8호
• /
• pp.2555-2560
• /
• 1996

Inspecting the dimensional accuracy of a car-body in assembly line is a very important process to assure high productivity. Now there exist two common inspecting methods in practice. One is to measure a sampled car-body with three dimensional measuring machine, and the other is to measure car-body with three dimensional measuring machine, and the other is to measure car-body in assembly line using many sensors fixed to a large jig frame. The formal method takes too long to inspect a sampled car-body of a same sort, and cannot therefore give an useful error trend for the whole production. On the other hand, the latter lacks flexibility and is very cost-intensive. By using industrial robots and sensors, an in-line Car-Body Measuring(CBM) system which ensured high flexiblity and sufficient accuracy was developed. This CBM cell operates in real production line and measures the check points by the non-contact type using camera and laser displacement sensor(LDS). This system can handle about 15 Measuring points within a cycle time of 40 seconds. A process computer controls whole process such as data acquisition file handling and data analysis. Robot arms changes in length due to ambient temperature fluctuation affecting the measuring accuracy. To compensate this error, a robot arm calibration process was developed.

• 센서학회지
• /
• 제27권4호
• /
• pp.242-248
• /
• 2018

Bicycle fittings have been used to ride bicycles comfortably while minimizing non-traumatic injuries. To analyze the cause of non-traumatic injuries, it is necessary to measure the body weight distribution in various biking positions. In this study, a weight distribution measurement system was implemented by installing five weighable devices on the saddle, both pedals, and both handle grips of a bicycle. To measure the body weight applied through the saddle, the structure of a commercial seat post was modified and a load cell was installed inside. Weighable pedals and handle grips were designed using a 3D modeling program and fabricated by employing a 3D printer. The body weight distribution for ten bicycle riders was measured when the two pedals were aligned horizontally and vertically. Experimental results showed that the body weight distribution varied significantly depending on human body shape, even after the bicycle fitting was completed. The difference between the body weight measured by the proposed system and a commercial scale was less than 3 %.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.707-713
• /
• 2021

Symptoms of foot-and-mouth disease include fever and drooling a lot around the hoof, blisters in the mouth, poor appetite, blisters around the hoof, and blisters around the hoof. Research is underway on smart barns that remotely manage these symptoms through cameras. Visible light cameras can measure the condition of livestock such as blisters, but cannot measure body temperature. On the other hand, infrared thermal imaging cameras can measure body temperature, but it is difficult to measure the condition of livestock. In this paper, we propose an object detection system using deep learning-based livestock detection using visible and infrared thermal imaging composite camera modules for preemptive response

• 산업공학
• /
• 제13권1호
• /
• pp.120-132
• /
• 2000

As science advances in many fields, the task of accommodating all human beings with comfort and safety becomes increasingly complex. The anthropometric data are basis of product design, but most of the anthropometric data for Korean emphasize the anthropological, physiological and engineering points of views. Also due to the scarce of body dimensions needed in designing products, the industrial designers are cautious in applying these data to design products. The purpose of this study was to select and measure the body parts that are necessary for the industrial designers but are scarce in existing data, and to illustrate the human body with measures instead of tables for easy understanding and application to industrial product design. Three hundreds and eighteen males and 260 females of age from 18 to 60 participated for this study. Eighty-two dimensions in standing and seating posture were selected to measure. The front views, side views and some working postures for man and woman are illustrated with measures. This study could provide the most vital data to assist designers in creating products and environments that better accommodate human needs.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.798-803
• /
• 2006

The suspension elements like primary coil spring, yaw damper, body to body damper are core parts of high speed railway bogie and the faults relating to these elements are reported recently. Thus, this study is started to analyze the displacements characteristics of suspension elements of high speed railway rolling-stock for the purpose of preventing the faults and developing the maintenance technology for suspension elements like spring and dampers. For this purpose, we made a plan to measure the displacements of the primary coil spring, yaw damper and body to body damper in actual running condition. We developed the measurement device to measure the longitudinal displacement and angular displacement of suspension elements and installed this device to test suspension elements. Test to measure displacements of suspension elements is conducted in service line of high speed railway. The displacement data which is acquired from the test with actual vehicles was analyzed for its maximum displacement depending on the track sections. As a result of analysis, we obtained the displacement trends occurring with the sections and valuable results like maximum values and the displacement distribution.

• Journal of Acupuncture & Meridian Studies
• /
• 제11권6호
• /
• pp.355-360
• /
• 2018

Introductions: Pneumothorax is the most frequent severe acupuncture-related adverse event occurring at the GB 21 acupoint. This study used ultrasonography (US) to measure the depth of the GB 21 acupoint in adults and assessed its applicability for ensuring safe acupuncture practices. Materials and methods: A US probe was used to measure the vertical depth from the skin to the pleural line of the apex of the lungs at the right and left GB 21 acupoints. The sex, age, body weight, height, and body mass index of each person were recorded. Student t test and generalized estimating equations were used for statistical analysis. Results: Sixty women and 41 men with a median age of 29 years were included in this study. The depth of GB 21 increased with body weight, height, and body mass index (p < 0.001). The mean depth of GB 21 in men (17.4 mm) was greater than that in women (14.6 mm; p < 0.001). The depth difference between the right and left shoulders was significant in men (p < 0.001) but not in women. Conclusions: US can be used to measure GB 21 acupoint depth. Further control studies on its use to ensure safe clinical practices, including preventing acupuncture-related pneumothorax, are warranted.

• 산업기술연구
• /
• 제26권B호
• /
• pp.243-248
• /
• 2006

The purpose of this study is to design a body-fat measurable electronic scale which can measure body impedance and weight. The hardware configuration of this system for the body-fat measurement includes a sinewave constant current generator, a analog switch circuit and a microprocessor with peripheral interface as well as electronic scale circuit. And the dedicated software is also designed for calculating body fat and body composition analysis from the result of the measurement.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4046-4053
• /
• 2011

종합검진센터에 방문한 성인 남녀 3281명을 대상으로 병원 밖에서 이루어지는 비만을 효율적이며 정확하게 진단하기 위하여 성별, 연령별 다른 신체 특성을 고려하여 체질량지수와 허리둘레의 절단값을 알아보고자 하였다. 대상자 3281명 중 남성은 1505명(45.9%), 여성은 1776명(54.1%)이었다. 평균 체지방량은 남성이 22.2%, 여성이 29.9%, 평균 체질량지수는 남성이 24.4kg/$m^2$, 여성이 22.9kg/$m^2$였으며, 평균 허리둘레는 남성이 86.2cm, 여성이 76.9cm이었다. 현재 일반적으로 사용되는 획일적인 체질량지수와 허리둘레 기준치는 성별, 연령별 달라지는 실제 체지방량을 잘반영한다고 볼 수 없으며, 향후 출장검진 시 신체계측만으로 비만을 진단할 때 보다 정확하게 하기 위해서 실제 체지방량을 고려한 새로운 기준치를 마련해야 할 것이다.