• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.69-78
• /
• 2021

The development of smart healthcare wearables for health is accelerating. Among them, many wearable products using EMS electrical stimulation, which is one of the active research fields, have been released. However, the EMS wearable, which has been studied or released, is released in a comprehensive full-body suit that does not focus on muscle segmentation or a belt that covers the entire abdomen. Therefore, this study intends to use two breathing methods by applying an EMS pattern that subdivides specific muscles and attach a stretch sensor that can measure breathing to the abdominal pressure belt. The measurement method was conducted by inhaling and exhaling, and the subjects were 10 men in their 20s with healthy bodies. As a result of this study, the sensor's sensitivity was 5 and 3 mm, and the basic sensor in both thoracic and abdominal breathings and the EMS abdominal pressure belt showed improved respiration activation after applying electrical stimulation before and after application. It is concluded that, because of the two patterns produced based on the physical function, the difference in respiration activation effect and sensitivity between sensors could be confirmed with three sensors rather than not applying electrical stimulation suitable for the respiration method. Based on the results of this study, a follow-up study aims to develop breathing smart clothing that can be monitored in real time in clothing-type wearable products that incorporate EMS patterns and stretch sensors.

• Conservation Science in Museum
• /
• v.26
• /
• pp.67-82
• /
• 2021

Two golden beads (Buyeo 5336) housed at the Buyeo National Museum were discovered in 1993 near the site of an ancient workshop in Neungsan-ri in Buyeo-gun, Chungcheongnam-do Province. These rare examples from the Baekje Kingdom of an application of granulation have maintained their original form intact, and thus serve as important materials for the investigation of production techniques applied. This study analyzed the composition of the golden beads using a portable X-ray fluorescence analyzer, a stereo microscope, and a scanning electron microscope with an energy dispersive X-ray spectrometer. The manufacturing technique was examined through the observation of the micro-shape and the surface condition and by a composition analysis of the joint part. In both beads, a hole was pierced in a hollow body and the bead was decorated with golden wires around the hole and gold granules in other parts. In some areas, golden granules had been attached to the gold plate and golden wires were then placed over the granules. The purity of both the wires and the granules was analyzed as 23.6 - 23.7K. A high copper content was detected in some of the parts where the granules were attached. The findings of a previous reproduction experiment and study of production methods suggest that the beads were made using the copper diffusion technique.

• Journal of the Daesoon Academy of Sciences
• /
• v.36
• /
• pp.267-298
• /
• 2020

The purpose of the paper is to analyze the developmental background and practical approaches to the arts of the Dao (道術 dosul) in Daesoon Jinrihoe (大巡真理會) by tracing this concept back to its source and comparing and contrasting Daesoon Jinrihoe's usage of 'arts of the Dao' with the usage found in traditional Daoism. The paper is divided into a preface, conclusion, and two body sections. Especially significant discoveries appear in the second and third sections. In the second section, the Daoist concept of Alterable and Unalterable Degree Numbers (運度定數 yundudingshu, 'degree numbers' suggesting 'fate' or 'destiny') allows for a comparison between the Reordering Works of Heaven and Earth (天地公事 cheonjigongsa) from Daesoon Jinrihoe's The Canonical Scripture (典經 jeon-gyeong) and the Opening of Calamities to Save Humanity (開劫度人 kaijieduren) in Daoism. Here discourse can be provided regarding the cause of calamities (劫 'jie' in Chinese and 'geop' in Sino-Korean). Additionally examined are the deep grievances between divine beings and humans and the cosmic cycles of growth and decay as both of these relate to the reason for calamities. As for the resolving of calamities, there are two differing perspectives proposed by Daesoon Jinrihoe and traditional Daoism. Daesoon Jinrihoe believes that Kang Jeungsan (姜甑山) led changes and renewal through the Reordering Works of Heaven and Earth. In this context, clergy and laity play roles as assistants. However, Daoism emphasizes gaining merit from the recitation of scriptures and the collective participation of immortals rather than relying completely upon divine intervention from the Celestial Worthy of the Primordial State (元始天尊 yuanshi tianzun). In the third section, 'The Origin and Application of the Arts of the Dao (道術 daoshu),' analysis is provided regarding the origin and connotation of five directional generals (五方將 wufangjiang), the twenty-four generals (二十四將 ershijiang), the twenty-eight generals (二十八將 ershibajiang), and the forty-eight generals (四十八將 sishibajiang). Likewise examined is the relationship between the arts of the Dao in The Canonical Scripture and Thunder Rites in the Shen Xiao Lineage (道教神霄雷法 daojiao shenxiao leifa) of Daoism. Lastly, some points are made about the operation of two ceremonies: The Ceremony of Transformation and Pacing (遁甲步罡儀式 dunjiabugangyishi) and Divination through the Formula Disc of the Six Ren Gods (六壬式盤占卜 liuren shipanzhanbu).

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.99-112
• /
• 2022

From early 2000, many researchers in the groundwater and soil environment remediation project tried to calculate the pollution level and pollution remediation cost and reflect it in the design. In addition, by identifying the movement characteristics of oil pollutants in the underground environment, many researchers tried to derive design factors necessary for pollution purification. However, although the test should be conducted in an area contaminated with oil, the toxicity and risk are too great for testing by deliberately leaking pollutants that are harmful to the human body. And as oil-contaminated areas are promoted by military units such as returned US military bases, there is a limit to access by the general public. In addition, since the indoor simulation test and the field application test have been carried out separately from each other, it was difficult to compare and review various simulation tests Therefore, in this study, PITT (Partitioning Interwell Tracer Test) and analysis methods were specifically presented through actual tests so that field workers could easily use them with the help of the military base and the Korea Rural Community Corporation Soil Environment Restoration Team. However, in order to directly reflect the distribution tracer test results in the pollution remediation design, it is necessary to reduce the analysis errors by comparing the analysis results of the existing soil pollution survey, physical exploration, and numerical modeling. In addition, it is judged to be cautious in the analysis because errors can easily occur due to various factors such as the type of oil at the polluted site, the hydraulic conductivity of the aquifer, and the skill of the researcher.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.43-52
• /
• 2021

As port development in soft ground is actively promoted for international logistics and transportation, the Deep Mixing Method (DMM) is continuously applied to form an improved column body directly in the ground by mixing cement with soil to secure the stability of the structure. However, in the case of cement, there is a problem of emitting a lot of greenhouse gases during the production process, so the development and use of new alternative materials are socially required to achieve the national goal of carbon neutrality. Accordingly, in this study, CMD-SOIL, developed to induce a hardening reaction similar to cement by recycling recycled resources, was used as a ground improvement material for the DMM. In addition, it was attempted to determine the possibility of replacing cement by conducting on-site test construction and evaluating applicability. As a result of the study, the compressive strength of CMD-SOIL compared to the design reference strength was 1.46 to 2.64 times higher in the field mixing test and 1.2 to 5.03 times higher than in the confirmed boring. In addition, the ratio (λ) of the compressive strength in the field to the design reference strength was 0.63 to 1.14, which was similar to the previous research results. Therefore, in the case of CMD-SOIL, it is possible to express the compressive strength necessary to secure stability, and there is no difference in applicability compared to existing materials such as ordinary portland cement and blast furnace slag cement, so it was analyzed that it could be used as a ground improvement material for the DMM.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1733-1743
• /
• 2022

Objective: This study was aimed to explore the efficacy of combination of endo-xylanase (Xyn) and xylan-debranching enzymes (arabinofuranosidase, Afd and feruloyl esterase, FE) in improving utilization of bran in piglet diet. Methods: In vitro experiments were firstly conducted to examine the enzymological properties of Xyn, Afd, and FE, concurrent with their effect on degradation of arabinoxylan (Abx) in bran. In vivo experiment was then implemented by allocating two hundred and seventy 35-d-old postweaning piglets into 3 groups (6 replicates/group), which received bran-containing diet supplemented with Xyn (1,600 U/kg) or its combination with Afd (0.8 U/kg) and FE (4 U/kg) or without enzyme. Results: Both Xyn, Afd, and FE are relatively stable against the changes in temperature and pH value. Combining Xyn with Afd and FE had a superiority (p<0.05) over Xyn alone and its combination with Afd or FE in promoting (p<0.05) degradation of Abx in different brans. Combined treatment with Xyn, Afd, and FE was more beneficial than Xyn alone to induce increasing trends (p<0.10) of average daily gain, final body weight and feed efficiency of piglets fed bran-containing diet. Moreover, combination of Xyn, Afd, and FE showed advantages (p<0.05) over Xyn alone in causing reductions (p<0.05) in diarrhea rate and cecal pH value, concurrent with increases (p<0.05) in cecal and colonic acetic acid and total volatile fatty acid concentrations, as well as cecal butyric acid concentration of piglets fed bran-containing diet. Conclusion: Combining Xyn with Afd and FE was more beneficial than Xyn alone in promoting degradation of Abx in bran, along with growth performance and intestinal volatile fatty acid profile of piglets received bran-containing diet. Thereby, combination of Xyn, Afd, and FE had a superior efficacy relative to Xyn alone in improving application of cereal bran in piglet diet.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.5
• /
• pp.366-373
• /
• 2020

The task of defining the concept of 'disability' has proven to be surprisingly difficult. The way disability is assessed in the world suggests that very different conceptions of disability are being presumed. It is very hard to suggest appropriate criteria for assessing a disability that accurately demonstrates the presence and measures the severity of the disability, with proven consistency and validity provided by the assessors consuming the time and cost that the society can afford. When a rigorous framework in disability assessment procedures is used, discretion is then considerably restricted. Limited discretion tends to produce more consistency and validity in the assessment but at the cost of ignoring the individual differences or exceptional circumstances. The disability approach among the categories of the disability assessment is both the oldest and the most commonly used strategy of disability assessment around the world. Most of the criteria of disability assessment in Korea belongs to this. The McBride's criteria for disability evaluations can be used to obtain the ratio of body impairment and work disability without spending too much time and is being applied in court. Nevertheless, there are many errors and controversies, and corrections are required. On the other hand, an improvement plan for a disability evaluation method in Korea is to supplement and use the McBride's disability assessment method, which is currently the most widely used. This review article describes the conception of disability and the assessment of disability, and introduces the models of the assessment of disability to determine if the application of the McBride's criteria of disability evaluation can be justified.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.196-205
• /
• 2021

As industrial safety increases, various industrial accident prevention technologies using smart factory technology are being studied. However, small and medium enterprises (SMEs), which account for the majority of industrial accidents, are having difficulties in preventing industrial accidents by applying these smart factory technologies due to practical problems. In this study, customized monitoring and warning systems for each type of industrial accident were developed and applied to the actual field. Through this, we demonstrated industrial accident prevention technology through appropriate smart factory technology used by SMEs. A customized monitoring system using vision, current, temperature, and gas sensors was established for the four major disaster types: worker body access, short circuit and overcurrent, fire and burns due to high temperature, and emission of hazardous gas. In addition, a notification method suitable for each work environment was applied so that the monitored risk factors could be recognized quickly, and real-time data transmission and display enabled workers and managers to understand the disaster risk effectively. Through the application and demonstration of these appropriate smart factory technologies, the spread of these industrial safety technologies is to be discussed.

• Korean Journal of Poultry Science
• /
• v.48 no.4
• /
• pp.177-184
• /
• 2021

Sex identification in day-old chicks is essential in the poultry industry. Currently, the feather-sexing using a sex-linked inheritance is a chick sexing method used extensively in the poultry industry. For chicks produced by feather-sexing, all females are early-feathering (EF) chicks and all males are late-feathering (LF) chicks. Therefore, investigating the effects of EF and LF phenotypes on production traits of chickens is critical. The purpose of this study was to analyze and compare the production performance between EF and LF chickens in Korean native commercial chickens. The results showed that the survival rate of the EF chickens was significantly higher than that of the LF chickens, from hatching to 12 weeks of age (P<0.05), with the highest difference observed in females. However, no significant difference was observed in body weight between the EF and LF chickens at almost all ages. In addition, no significant difference was observed between in feed utility, such as average daily feed intake and feed conversion ratio, between the EF and LF groups. In conclusion, although the survival rate of early-feathering chickens was superior to that of late-feathering chickens, no significant difference was observed in growth performance and feed utility among Korean native chickens. The results suggest that production capacity is not influenced by feathering type in the establishment of a breeder structure and production system for feather-sexing Korean native chickens, which is valuable for the practical application of feather-sexing in the poultry industry.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.30 no.2
• /
• pp.71-90
• /
• 2021

The virtual patient dataset is a collection of diagnostic data from various sources acquired from a single patient into a coordinate system of three-dimensional visualization. Virtual patient dataset makes it possible to establish a treatment plan, simulate various treatment procedures, and create a treatment planning delivery device. Clinicians can design and simulate a patient's smile on the virtual patient dataset and select the optimal result from the diagnostic process. The selected treatment plan can be delivered identically to the patient using manufacturing techniques such as 3D printing, milling, and injection molding. The delivery of this treatment plan can be linked to the final prosthesis through mockup confirmation through provisional restoration fabrication and delivery in the patient's mouth. In this way, if the diagnostic data superimposition and processing accuracy during the manufacturing process are guaranteed, 3D digital smile design simulated in 3D visualization can be accurately delivered to the real patient. As a clinical application method of the virtual patient dataset, we suggest a decision-making method that can exclude occlusal adjustment treatment from the treatment plan through the digital occlusal pressure analysis. A comparative analysis of whole-body scans before and after temporomandibular joint treatment was suggested for adolescent idiopathic scoliosis patients with temporomandibular joint disease. Occlusal plane and smile aesthetic analysis based on the virtual patient dataset was presented when treating patients with complete dentures.