• 제목/요약/키워드: block-type, design

검색결과 317건 처리시간 0.023초

한국형 표준전동차 종합제어장치(TCMS)의 신뢰성 소프트웨어 개발 기술 (Reliability software design techniques of the Train Control and Monitoring System(TCMS) for the Standard type K-EMU)

  • 한성호;안태기;이수길;이관섭;최규형
    • 한국철도학회논문집
    • /
    • 제3권3호
    • /
    • pp.147-153
    • /
    • 2000
  • The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

  • PDF

부산 및 인천항만 안벽구조물의 지진취약도 예측 (Estimation of Seismic Fragility for Busan and Incheon Harbor Quay Walls)

  • 김영진;김동현;이기남;박우선
    • 한국해안·해양공학회논문집
    • /
    • 제25권6호
    • /
    • pp.412-421
    • /
    • 2013
  • 최근 서해안 등지에서 중소규모 지진이 빈번하게 발생하고 있다. 이러한 지진에 의한 항만 구조물의 손상 및 파괴는 국가 경제에 큰 피해를 유발할 수 있다. 따라서 이러한 지진에 대비하기 위한 내진 설계 및 지진 경보시스템 개발이 필요한 실정이다. 본 연구에서는 항만 지진 피해 예측 시스템에 입력치 제공을 위한 부산 및 인천항의 안벽 구조물의 지진 취약도 해석을 수행하였다. 해석 대상은 부산 및 인천항의 잔교식, Caisson식, 부벽식, 블록식 안벽을 각각 4가지 Case를 해석하였으며 기능수행수준 및 붕괴방지수준에 대하여 변위기반 지진취약도 해석을 수행하였고 해석결과를 다른 항만의 안벽에도 적용할 수 있도록 회귀분석하였다.

차량용 사축식 피스톤 펌프의 피스톤 링과 실린더 보어간의 윤활특성에 관한 연구 (A study on lubrication characteristics between piston ring and cylinder bore of bent-axis type piston pump for vehicle)

  • 정재연;조인성;송규근;백일현;오석형;정석훈;정용욱
    • Tribology and Lubricants
    • /
    • 제23권5호
    • /
    • pp.201-206
    • /
    • 2007
  • The bent-axis type piston pump which is driven by the piston rod works on the way that the piston rod drives the cylinder block, so the taper angle of the piston rod and the swivel angle between the cylinder block and the shaft are very important design factors. If the above factors cannot satisfy the conditions of optimum design, the friction loss between the cylinder bore and the piston increases, and the pump can even fail to work under conditions of severe friction and wear. Since the piston reciprocates in the cylinder bore with high velocity, and at the same time it rotates on its own axis and revolves on the center of the cylinder block, the decrease of the volume efficiency generated on account of the leakage between the cylinder bore and the piston. Therefore, to prevent this case, the piston ring is designed at the end of the piston, and the friction characteristics between the piston ring and the cylinder bore are in need of research due to its great influence on the performance of piston pump. Thus, in this paper, the elastic hydraulic oil's lubrication analyses of the film thickness, the pressure distribution, and the friction force, and so on, have been performed, and the lubrication characteristics between the piston ring and the cylinder bore are explored by the results of the numerical analysis, and it is contributed to realize the higher efficiency and the more advanced performance of the bent-axis type piston pump.

3 ${\times}$ 3 라틴방격모형의 검정력 분석 (Power analysis for 3 ${\times}$ 3 Latin square design)

  • 최영훈
    • Journal of the Korean Data and Information Science Society
    • /
    • 제20권2호
    • /
    • pp.401-410
    • /
    • 2009
  • 두 블럭인자와 하나의 주인자로 구성된 3 ${\times}$ 3 라틴방격모형의 특성으로 인하여 주효과를 검정하기 위한 순위변환 통계량의 검정력은 모집단의 분포유형에 상관없이 모수적 통계량의 검정력보다 전반적으로 월등히 높은 수준이다. 특히 세인자가 모두 고정인 경우, 하나의 블럭인자만이 랜덤인 경우, 두 블럭인자가 모두 랜덤인 경우의 순서로 주효과를 검정하기 위한 순위변환 통계량의 검정력이 모수적 통계량의 검정력에 비하여 상대적으로 높다. 또한 검정하고자 하는 주효과의 크기가 크되 동시에 동일크기의 하나의 블럭효과 및 또다른 블럭효과 크기는 상대적으로 작을수록 주효과를 검정하기 위한 순위변환 통계량의 검정력은 모수적 통계량의 검정력보다 상대적 우위성을 갖는다.

  • PDF

투수블록시설의 유출저감효과 분석 및 강우강도-지속시간 관계 분석 (Analysis of Runoff Reduction Effect and Rainfall Intensity-Duration Time of Permeable Block Facility)

  • 한상윤;길경익
    • 한국습지학회지
    • /
    • 제22권1호
    • /
    • pp.1-7
    • /
    • 2020
  • 비점오염은 수계에 악영향을 끼치며 그 영향은 점차 커지고 있다. 이러한 비점오염을 관리하기 위해 정부에서는 LID(Low Impact Development) 시설의 연구와 다양한 효율평가를 시행하고 있다. 본 연구에서는 다양한 LID 시설 중 실제 설치된 투수 블록 시설의 강우 유출 억제를 위한 유출 저감율, 저류 강우량 분석 및 유출 지연시간 그리고 최대 유입 및 유출의 저감율을 분석했으며, 그 결과를 각 시설 간 비교했다. 불투수블록, 필터형 투수블록, 틈새형 투수블록 순서대로 분석 결과 저감 효율이 높게 나타났으며, 이를 통해 강우강도-유출지연시간간의 관계를 나타낸 그래프를 제시하였다. 이 그래프를 통해 앞으로 설계 시, 본 시설과 유사한 투수블록 시설의 재현 기간에 따른 시설 용량 선정 등의 설계에 도움을 줄 수 있으리라 생각한다.

Three-Phase Soft Switching Sinewave Inverter with Bridge Power Module Package Configurated Auxiliary Resonant AC Link Snubber

  • Iyomori Hisashi;Nagai Shin-ichiro;Shiraishi Kazuhiro;Ahmed Tarek;Eiji Hiraki;Mutsuo Nakaoka
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
    • /
    • pp.507-510
    • /
    • 2003
  • This paper presents a novel prototype of tile three-phase bridge power block module type a auxiliary resonant AC link snubber circuit, which is effectively used for the three-phase voltage source type sinewave soft switching PWM inverter using IGBTs. Its operating principle Is described for current source load model, along with its practical design approach based on the simulation data. The performance evaluation of the three-phase voltage source type snewave soft switching PWM inverter incorporating a single three-phase bridge mo여le of active auxiliary resonant AC link snubber treated here Is illustrated, which is concerned with power duality efficiency power loss analysis. This inverter is discussed as compared with those of tile three-phase voltage source type sinewave hard switching PWM inverter. The power loss analysis of this soft switching PWM Inverter using IGBT power modules is evaluated on the basis of the measured v-i characteristics and switching power losses of IGBT, and antiparaliel diodes. The practical effectiveness of this inverter is proven by the power loss analysis for distributed power supply.

  • PDF

블럭이 존재하는 $2{\times}2$ 요인모형의 검정력 분석 (Power analysis for $2{\times}2$ factorial in randomized complete block design)

  • 최영훈
    • Journal of the Korean Data and Information Science Society
    • /
    • 제22권2호
    • /
    • pp.245-253
    • /
    • 2011
  • 블럭이 존재하는 $2{\times}2$ 요인모형의 주 효과 및 상호작용효과를 검정하기 위한 순위변환 통계량의 검정력은 블럭크기, 효과들의 구성방법 및 지수분포, 이중지수분포, 정규분포, 균일 분포를 포함한 모든 모집단 분포하에서 모수적 통계량의 검정력보다 월등한 우위를 보인다. 이는 블럭이 추가된 요인 모형은 블럭과 요인의 상호작용들이 오차항을 증가시켜 모수적 통계량의 검정력을 감소시키는 보수적 성향을 보이나, 순위변환 통계량의 검정력은 상대적 우위를 유지함에 기인한다고 유추할 수 있다. 일반적으로 블럭크기가 작고, 효과크기가 클수록 순위변환 통계량의 검정력은 모수적 통계량의 검정력보다 상당히 큰 격차의 상대적 우위를 보임을 알 수 있다.

연약지반과 풍화토지반에서 경사고임대 지지블록의 수동토압 산정 (Passive Force Acting on the Kicker Block Used to Support a Raker in Soft and Weathered Soil)

  • 김태형;박이근;김태오;진현식
    • 대한토목학회논문집
    • /
    • 제37권5호
    • /
    • pp.801-813
    • /
    • 2017
  • 경사고임대의 지지블록에서 발휘되는 수동토압은 지반종류에 따라 발휘되는 토압이 다르다. 영구구조물인 옹벽 설계에서는 수동토압의 안전율을 고려하도록 하고 있으나, 가시설에 설치되는 경사고임대 지지블록에 작용하는 토압은 실제 발휘되는 수동측토압보다 과하게 산정되어 불안전측의 설계가 되고 있다. 본 연구에서는 3차원 수치해석(PLAXIS)을 이용 토사지반에서 경사고임대 지지블록에 발생되는 수동측토압을 산정하였다. 토사지반으로 연약지반과 풍화토지반이 선택되었다. 수치해석결과 각 지반에서 지지블록의 수평변위와 수동측토압 관계 곡선이 산정되었으며 이 곡선상의 항복점이 설계에 적용할 경사고임대 지지체에서의 저항력으로 연약지반에서는 Rankine 수동토압의 약 55.5%, 풍화토지반에서는 약 66%를 보는 것이 안정성 측면에서 바람직한 것으로 나타났다.

동영상에서 신발 밑창 모델 인식을 위한 인터레이스 제거 및 블록 코드 생성 기법 (De-interlacing and Block Code Generation For Outsole Model Recognition In Moving Picture)

  • 김철기
    • 지능정보연구
    • /
    • 제12권1호
    • /
    • pp.33-41
    • /
    • 2006
  • 본 논문에서는 공장 자동화 시스템의 한 예로, 컨베이어 벨트로 흘러 들어오는 생산품을 모델별로 자동 인식하기 위한 방법을 제안하고 있다. 일반적으로 NTSC 방식의 카메라를 사용할 경우 움직이는 물체는 카메라 고유의 잔상이 발생하게 된다. 잔상이 존재하는 영상을 이용하여 효율적인 처리가 불가능하므로 적당한 후처리 방법이 요구된다. 이를 위하여 제안하는 인터레이스 제거 기법을 통하여 잔상을 제거하고, 이진화를 통하여 대략적 물체 영역을 판별한 후 물체를 에워싸는 직사각형 영역을 구한다. 그 후 윤곽선 검출을 거쳐 직사각형 영역을 블록별로 세분화한 후 각 블록별 화소수를 계산하여 평균을 중심으로 재분류한 후 모델 코드를 생성하여 모델 분류를 하였다. 실험결과 본 논문에서 제안하는 방법의 경우 기존의 방법보다 높은 분류 성공률을 나타내었다.

  • PDF

한국형 패시브하우스를 위한 단열블럭시스템의 난방에너지소비 특성 (A Characteristic Heating-Energy Expend of Insulation Block System for Korea Type Passive House)

  • 강재식;최경석;양관섭;이승언
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.603-607
    • /
    • 2009
  • About a Structure is performance external insulation is fundamantal performance for enrgy-saving. these day, most of residential structures have constructed by internal insulation method structure. The method structure internal insulation have construction and economical efficiency, but on the other hand, be generated heat loss by heat bridge especially, be generated loss heat-energy logical consequence in structure ondol. The external insulation structure method has a mert able to minimum to loss heat about heat-bridge. But the external insulation technique is unsatisfactory statues within the know-how and method of construction and materials compared with developed countries. The recently, the requirement of market related to the external insulation technique is resulted by the energy efficiency system, but it can lead to the lack of alternative technique In study on the korea type passive house building design for insulation block method of wall system has to experimental characteristic heat-energy of practice building. In result field-experimental, the heat-bridge appeared to characteristic spent heat-energy of blow 2L class and have a suffience performance it.

  • PDF