• The Korean Journal of Pain
• /
• v.19 no.2
• /
• pp.202-206
• /
• 2006

Background: Stellate ganglion block (SGB) might be associated with changes in the blood pressure (BP) and heart rate (HR). The heart rate variability (HRV) shows the balance state between sympathetic and parasympathetic activities of the heart. The changes in these parameters of the HRV were studied to evaluate the possible mechanism of SGB in changing the BP. Methods: SGB was performed on 26 patients, using a paratracheal technique at the C6 level, and 8 ml of 1% mepivacaine injected. The success was confirmed by check the Horner's syndrome. The BP, HR and HRV were measured before and 5, 15, 30, 45 and 60 minutes after the SGB. Results: The increases in the BP from the baseline throughout the study period were statistically, but not clinically significant. The HR and LF/HF (low frequency/high frequency) ratio were increased at 5 and 45 min, respectively, after the administration of the SGB. In a comparison of left and right SGB, no significant differences were found in the BP, HR and HRV. A correlation analysis showed that an increased BP was significantly related with the changes in the LF/HF ratio and LF at 15 and 30 minutes, respectively, after the SGB. Dividing the patients into two groups; an increased BP greater and less than 20% of that at the baseline INC and NOT groups, respectively, hoarseness occurred more often in the INC group (P = 0.02). Conclusions: It was concluded that SGB itself does not clinically increase the BP and HR in normal hemodynamic patients. However, the loss of balance between the sympathetic and parasympathetic nerve system, attenuation of the baroreceptor reflex and hoarseness are minor causes of the increase in the BP following SGB; therefore, further studies will be required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2080-2089
• /
• 2015

In 3D video compression, a disparity vector (DV) pointing a corresponding block position in an adjacent view is a key coding tool to exploit statistical correlation in multi-view videos. In this paper, neighboring block-based disparity vector (NBDV) is shown with detail algorithm descriptions and coding performance analysis. The proposed method derives a DV from disparity motion vector information, obtained from spatially and temporally neighboring blocks, and provides a significant coding gain about 20% BD-rate saving in a texture-video-first-coding scheme. The proposed DV derivation method is adopted into the recent 3D video coding standards such as 3D-AVC and 3D-HEVC as the state-of-the-art DV derivation method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.8
• /
• pp.1172-1180
• /
• 2013

Two experiments were conducted to determine the standardized ileal digestible (SID) lysine (Lys) requirement and the ideal SID threonine (Thr) to Lys ratio for finishing barrows. In Exp. 1, 120 barrows with an average body weight of $72.8{\pm}3.6$ kg were allotted to one of six dietary treatments in a randomized complete block design conducted for 35 d. Each diet was fed to five pens of pigs containing four barrows. A normal crude protein (CP) diet providing 15.3% CP and 0.71% SID Lys and five low CP diets providing 12% CP with SID Lys concentrations of 0.51, 0.61, 0.71, 0.81 and 0.91% were formulated. Increasing the SID Lys content of the diet resulted in an increase in weight gain (linear effect p = 0.04 and quadratic effect p = 0.08) and an improvement in feed conversion ratio (FCR) (linear effect p = 0.02 and quadratic effect p = 0.02). For weight gain and FCR, the estimated SID Lys requirement of finishing barrows were 0.71 and 0.71% (linear broken-line analysis), 0.79 and 0.78% (quadratic analysis), respectively. Exp. 2 was a 26 d dose-response study using SID Thr to Lys ratios of 0.56, 0.61, 0.67, 0.72 and 0.77. A total of 138 barrows weighing $72.5{\pm}4.4$ kg were randomly allotted to receive one of the five diets. All diets were formulated to contain 0.61% SID Lys (10.5% CP), which is slightly lower than the pig's requirement. Weight gain was quadratically (p = 0.03) affected by SID Thr to Lys ratio while FCR was linearly improved (p = 0.02). The SID Thr to Lys ratios for maximal weight gain and minimal FCR and serum urea nitrogen (SUN) were 0.67, 0.71 and 0.64 using a linear broken-line model and 0.68, 0.78 and 0.70 using a quadratic model, respectively. Based on the estimates obtained from the broken-line and quadratic analysis, we concluded that the dietary SID Lys requirement for both maximum weight gain and minimum FCR was 0.75%, and an optimum SID Thr to Lys ratio was 0.68 to maximize weight gain, 0.75 to optimize FCR and 0.67 to minimize SUN for finishing barrows.

• Geomechanics and Engineering
• /
• v.11 no.3
• /
• pp.401-420
• /
• 2016

The stability of deep coal roadways with large sections and thick top coal is a typical challenge in many coal mines in China. The innovative Universal Discrete Element Code (UDEC) trigon block is adopted to create a numerical model based on a case study at the Dongtan coal mine in China to better understand the failure mechanism and stability control mechanism of this kind of roadway. The failure process of an unsupported roadway is simulated, and the results suggest that the deformation of the roof is more serious than that of the sides and floor, especially in the center of the roof. The radial stress that is released is more intense than the tangential stress, while a large zone of relaxation appears around the roadway. The failure process begins from partial failure at roadway corners, and then propagates deeper into the roof and sides, finally resulting in large deformation in the roadway. A combined support system is proposed to support roadways based on an analysis of the simulation results. The numerical simulation and field monitoring suggest that the availability of this support method is feasible both in theory and practice, which can provide helpful references for research on the failure mechanisms and scientific support designing of engineering in deep coal mines.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.55-62
• /
• 2000

This paper presents an analysis of the chaotic behavior in the discrete-time voltage mode chaotic generator fabricated using 0.8${\mu}{\textrm}{m}$ single poly CMOS technology. An approximated empirical equation is extracted from the measurement data of a nonlinear function block. Then the bifurcation diagram is simulated according to input variables and Lyapunov exponent λ which represent a dependence on an initial value is calculated. We show the interrelations among time waveforms, state transition, and power spectra for the state condition of chaotic circuit, such as equilibrium, periodic, and chaotic state. And results of experiments in the chaotic circuit with the $\pm$2.5V power supply and sampling clock frequency of 10KHz are shown and compared with the simulated results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.757-766
• /
• 2014

To compensate signal loss due to the channel blockage in satellite communication link, we propose a cooperative communication scheme for OTM(On-The-Move) terminal in next generation satellite communication systems. The proposed scheme configures cooperation subnet with adjacent OTM terminal with the help of ground communication equipment. Shared data is spread by orthogonal spreading code, then the spread sequences are transmitted simultaneously. The receiver combines the power of received signals by EGC(Equal gain combining). The OTM terminal blockage channel is modeled by 2-state Markov chain. We evaluate the bit error rate according to the blockage channel of the channel state for the performance analysis of the proposed scheme. As a result, the proposed scheme shows better BER performance than traditional scheme with the help of subset members. In particular, the proposed scheme shows superior performance as the channel block probability is higher. However, as the number of subset members is increasing, there is a constraint because of the higher multiple access interference.

• Geomechanics and Engineering
• /
• v.34 no.4
• /
• pp.409-424
• /
• 2023

Response of the pipeline crossing fault is considered as the large strain problem. Proper estimation of the pipeline response plays important role in mitigation studies. In this study, an advanced continuum modeling including material non-linearity in large strain deformations, hardening/softening soil behavior and soil-pipeline interaction is applied. Through the application of a fully nonlinear analysis based on an explicit finite difference method, the mechanics of the pipeline behavior and its interaction with soil under large strains is presented in more detail. To make the results useful in oil and gas engineering works, a continuous pipeline of two steel grades buried in two clayey soil types with four different crossing angles of 30°, 45°, 70° and 90° with respect to the pipeline axis have been considered. The results are presented as the fault movement corresponding to different damage limit states. It was seen that the maximum affected pipeline length is about 20 meters for the studied conditions. Also, the affected length around the fault cutting plane is asymmetric with about 35% and 65% at the fault moving and stationary block, respectively. Local buckling is the dominant damage state for greater crossing angle of 90° with the fault displacement varying from 0.4 m to 0.55 m. While the tensile strain limit is the main damage state at the crossing angles of 70° and 45°, the cross-sectional flattening limit becomes the main damage state at the smaller 30° crossing angles. Compared to the stiff clayey soil, the fault movement resulting 3% tensile strain limit reach up to 40% in soft clayey soil. Also, it was seen that the effect of the pipeline internal pressure reaches up to about 40% compared to non-pressurized condition for some cases.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.1
• /
• pp.17-28
• /
• 2012

Functional mismatch and thought and plan-less material use of recently built boundary barriers in rural areas should greatly degrade their amenity value as one of linear villagescapes, but, their present state-of-art basically necessary for problem-solving had never surveyed up to now. From this point of view, this study tried to investigate present stock quantities and qualities of boundary barriers in rural areas by sample studies on 21 case villages(7 types ${\times}$ 3 cases) and comparative analysis between the planned or improved and nots. Wall type was absolutely dominated in the structural terms, of which more than half was used cement block as building material and, therefore, grey-colored. More than half of total barrier length were fully shielded, while relatively partially shielded in the mountainous villages in open space and 'Cultural villages' with closed housing structures. Free standing style of barriers was shown along over two thirds of their total length, although not more than half in planned reclaimed villages. Especially, because of one-sided wall type structure, mismatched over-shieldness and poorer maintenance condition of the boundary barriers in peri-urban villages, there should be provided with very intensive improvement efforts for amenity barriers.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.187-195
• /
• 2021

The intensification of the processes of the digital economy development is leading to the transformation of the higher education system. Universities are forced to digitalize their own educational, research, international, marketing, financial and economic activities in order to maintain a competitive position in the global market of educational services. The purpose of the article is to study the role of information and communication technologies in the development of the higher education system and to ensure its adaptability to modern challenges of digital economy. To achieve this goal, methods of content analysis, logical generalization, systematization and a structural-functional method are used. In the article, the authors substantiate the urgency of forming a holistic strategy to ensure the adaptability of higher education to the challenges of digital economy. In the structure of this strategy, the information-technological block is singled out and described. The authors specified a set of positive synergetic effects from the introduction of modern information and communication technologies in the activities of universities. The main information threats to the digitalization of higher education related to the protection of personal data and university systems from cyberattacks and fraudulent schemes are identified. In conclusion, the authors detail the measures for the strategy implementation to ensure the adaptability of higher education to digital economy.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.11-18
• /
• 2016

Magnetic resonance image (MRI) is widely used in brain research field and medical image. Especially, non-invasive brain activation acquired image technique, which is functional magnetic resonance image (fMRI) is used in brain study. In this study, we investigate brain activation occurred by LED light stimulation. For investigate of brain activation in experimental small animal, we used high magnetic field 9.4T MRI. Experimental small animal is Balb/c mouse, method of fMRI is using echo planar image (EPI). EPI method spend more less time than any other MRI method. For this reason, however, EPI data has low contrast. Due to the low contrast, image pre-processing is very hard and inaccuracy. In this study, we planned the study protocol, which is called block design in fMRI research field. The block designed has 8 LED light stimulation session and 8 rest session. All block is consist of 6 EPI images and acquired 1 slice of EPI image is 16 second. During the light session, we occurred LED light stimulation for 1 minutes 36 seconds. During the rest session, we do not occurred light stimulation and remain the light off state for 1 minutes 36 seconds. This session repeat the all over the EPI scan time, so the total spend time of EPI scan has almost 26 minutes. After acquired EPI data, we performed the analysis of this image data. In this study, we analysis of EPI data using statistical parametric map (SPM) software and performed image pre-processing such as realignment, co-registration, normalization, smoothing of EPI data. The pre-processing of fMRI data have to segmented using this software. However this method has 3 different method which is Gaussian nonparametric, warped modulate, and tissue probability map. In this study we performed the this 3 different method and compared how they can change the result of fMRI analysis results. The result of this study show that LED light stimulation was activate superior colliculus region in mouse brain. And the most higher activated value of segmentation method was using tissue probability map. this study may help to improve brain activation study using EPI and SPM analysis.