• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.372-379
• /
• 2000

In this paper, we propose a fast variable-size block matching algorithm for motion estimation based on bit-pattern. Motion estimation in the proposed algorithm is performed after the representation of image sequence is transformed 8bit pixel values into 1bit ones depending on the mean value of search block, which brings a short searching time by reducing the computational complexity. Moreover, adaptive searching methods according to the motion information of the block make the procedure of motion estimation efficient by eliminating an unnecessary searching of low motion block and deepening a searching procedure in high motion block. Experimental results show that the proposed algorithm provides better performance-0.5dB PSNR improvement-than full search block matching algorithm with a fixed block size.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.381-384
• /
• 2009

In the Wyner-Ziv coding, compression performance highly depends on the quality of the side information since better quality of side information brings less channel noise and less parity bit. However, as decoder generates side information without any knowledge of the current Wyner-Ziv frame, it doesn't have optimal criterion to decide which block is more advantageous to generate better side information. Hence, in general, fixed block size motion estimation (ME) is performed in generating side information. By the fixed block size ME, the best coding performance cannot be attained since some blocks are better to be motion estimated in different block sizes. Therefore if there is a way to find appropriate ME block of each block, the quality of the side information might be improved. In this paper, we investigate the effects of variable block sizes of ME in generating side information.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.165-170
• /
• 2005

The weight of a ship depends on the size of the ship. Normal lightweight of a ship is over 10,000 tons. So it is inevitable to divide a ship into about more than hundreds of lumps. Each of lumps is called as a block in shipbuilding. The sizes of blocks are decided by a yard's facilities. Among them lifting cranes are most decisive facilities. By block's size the productivity of a yard is decided very much. So it is very important to have a proper block division during shipbuilding. This paper refers to the recent trend of block division among yards. This paper would give an idea how to decide boundaries of blocks. Block division also decides both quality of a ship and work volume of it. These days the block erection method is changed dramatically due to use sea barge mounted crane for erection of a grand ring block. This paper explains the new trend of block division in shipbuilding.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.724-737
• /
• 2020

Corrected Block TEA(or XXTEA) is a block cipher designed to correct security weakness in the original block TEA in 1998. In this paper, XXTEA cipher hardware which can encrypt or decrypt between 64-bit and 256-bit messages using 128-bit master key is implemented. Minimum message block size is 64-bit wide and maximal message block size is 256-bit wide. The designed XXTEA can encrypt and decrypt variable-length message blocks which are some arbitrary multiple of 32 bits in message block sizes. XXTEA core of this paper is described using Verilog-HDL and downloaded on Vertex4. The operation frequency is 177MHz. The maximum throughput for 64-bit message blocks is 174Mbps and that of 256-bit message blocks is 467Mbps. The cryptographic IP of this paper is applicable as security module of the mobile areas such as smart card, internet banking, e-commerce and IoT.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.273-278
• /
• 2016

In HEVC variable block size motion estimation, same search window data are duplicatedly used in each block size. It increases memory bandwidth, and it is difficult to exploit early termination. In this paper, largest block size and its corresponding smaller block sizes with same positions are performed at the same time. It reduces memory bandwidth and computation by reusing search window data and computation results. In the early termination, image quality can be degraded when it determines early termination by observing largest block size only, since smaller block sizes cannot be equally terminated due to their relative positions. So, in this paper, processing order of early termination is changed to perform smaller block sizes in turns. The designed motion estimation engine was described in Verilog HDL and it was synthesized and verified in 0.18um process technology. Its gate count and maximum operating frequency are 36,101 gates and 263.15 MHz, respectively.

• Journal of Biomedical Engineering Research
• /
• v.10 no.2
• /
• pp.173-178
• /
• 1989

A vector quantization technique using a variable block size was applied to image compression of digitized X -ray films. Whether the size of VQ block should be subdivided or not is determined experimentally by the threshold value. The simulation result shows that the performance of the proposed vector quantizer is suitable for the medical image coding, which is applicable to PACS( Picture Archiving and Communication System).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.38-48
• /
• 2011

Block based LCD backlight nonideality and crosstalk compensation methodologies are proposed based on the analysis of backlight profiles and image pixel homogeneity. Large computation complexity required in the conventional compensations is minimized without the degradation of image qualities by optimizing image block size, image area inside the block to be excluded from the compensation computation and the required backlight range to be computed. The optimization results of computation complexity as well as image qualities are verified for the proposed compensation by real image data simulations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.165-178
• /
• 2000

In this study the effects of block distance have been investigated on the particle deposition efficiency in the collecting cell of two-stage electrostatic precipitator by numerical analysis. Particle trajectories have been changed by the electrostatic and inertial force of particle with the inlet velocity electrostatic number and particle diameter. The total deposition efficiency has a minimum value by the interaction between the effect of particle inertial force and electrostatic force in the collecting cell. The increase of block distance makes the total deposition efficiency decrease under the range of the particle size which has the minimum deposition efficiency. However beyond the range of particle size which has minimum deposition efficiency total deposition efficiency has no trend with the variation of block distance.

• The KIPS Transactions:PartB
• /
• v.10B no.3
• /
• pp.321-328
• /
• 2003

This Paper Proposes a size-variable block matching algorithm for motion vector extraction. The Proposed algorithm dynamically determines the search area and the size of a block. We exploit the constraint of small velocity changes of a block along the time to determine the origin of the search area. The range of the search area is adjusted according to the motion coherency of spatially neighboring blocks. The process of determining the sire of a block begins matching with a small block. If the matching degree is not good enough, we expand the size of a block a little bit and then repeat the matching process until our matching criterion Is satisfied. The experimental results show that the proposed algorithm can yield very accurate block motion vectors. Our algorithm outperforms other algorithms in terms of the estimated motion vectors, though our algorithm requires some computational overhead.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.3
• /
• pp.39-47
• /
• 2017

The Depth Picture can be Encoded by the Plane Coding Mode that is the Method for Coding Mode by Considering a Part of the Picture as the Plane. In this Paper, we Propose the Method of Determining the Variable-sized Block for Variable Block Coding in the Plane Coding Mode for the Depth Picture. The Depth Picture Can be Encoded in the Plane Coding Through Estimating the Plane Which is Close to Pixels in the Block Using Depth Information. The Variable-sized Block Coding in the Plane Coding can be Applied as Follows. It Calculates the Prediction Error between Predicted Depths by the Plane Estimation and the Measured Depths. If Prediction Error is Below the Threshold, the Block is Encoded by Current Size. Otherwise, it Divides the Block and Repeats Above. If the Block is Divided Below the Minimum Size, the Block is not Encoded by the Plane Coding Mode. The Result of the Simulation of the Proposed Method Shows that the Number of Encoded Block is Reduced to 19% as Compared with the Method Using the Fixed-sized Block in the Depth Picture Composed of one Plane.