• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.935-942
• /
• 2000

In this paper we introduce a fast simplification algorithm for terrain height fields to produce a triangulated irregular network, based on the greedy insertion algorithm in [1,4,5]. Our algorithm partitions a terrain height data into rectangular blocks with the same size ad simplifies blocks one by one with the greedy insertion algorithm. Our algorithm references only to the points and the triangles withing each current block for adding a point into the triangulation. Therefore, the algorithm runs faster than the greedy insertion algorithm, which references all input points and triangles in the terrain. Our experiment shows that partitioning method runs from 4 to more than 20 times faster, and it approximates test height fields as accurately as the greedy insertion algorithms. Most greedy insertion algorithms suffer from elongated triangles that usually appear near the boundaries. However, we insert the four corner points into each block to produce the base triangulation of the block before the point addition step begins so that elongated triangles could not appear in th simplified terrain.

• Journal of the Korean Geographical Society
• /
• v.35 no.5
• /
• pp.653-663
• /
• 2000

본 논문에서는 설악산 아고산대에 나타나는 산정형 암괴원에 관한 여러 가지 논의를 제시하였다. 이 암괴원은 산악인들에게는 너덜지대로 너리 알려져 있었으며, 설악산의 북쪽 황철봉과 귀떼기봉에서 대청에 이르는 서북주릉 상 화강암류의 기반암에 암괴원이 분포하고 있다. 이들 암괴원은 규모가 클 뿐망 아니라 암괴상에는 풍화쇄설물을 가지고 있는 나마(gnamma)와 그루브(groove)를 비롯한 많은 화학적 풍화에 의한 미지형들이 발견되고 있어 한반도의 제 4기 후반의 기후변화와 지형형성 영력을 연구할수 이는 기후지형학적으로 중요한 연구지역이라 하겠다. 본 논문에서는 추후 발표될 암괴원의 성인과 고기후학적 의의에 관한 논의에 앞서 먼저 분포지역에 대한 소개와 몇 가지 이론적 고찰에 관하여 논의를 제한하고자 한다. 국내에서는 테일러스, 암괴류 등에 관한 논의가 상당히 이루어지고 있으나 암괴원에 관한 본격적인 논의는 아직 시작단계에 있다. Landsat 영상에 의한 구조선 분석 결과 구조선 밑도는 설악산 지역에서 큰 차이를 나타내지는 않으며, 암괴원은 대부분 화강암 지역에서 나타나는 것으로 판단된다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.5
• /
• pp.45-51
• /
• 2002

As Koblitz curve, the Frobenius endomorphism is know to be useful in efficient implementation of multiplication on non-supersingular elliptic cures defined on small finite fields of characteristic two. In this paper a method using the extended Frobenius endomorphism to speed up scalar multiplication is introduced. It will be shown that the proposed method is more efficient than Muller's block method in ［5］ because the number of point addition for precomputation is small but on the other hand the expansion length is almost same.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.5
• /
• pp.1141-1162
• /
• 2024

Humidity is an important parameter in meteorology and is closely related to weather, human health, and the environment. Due to the limitations of the number of observation stations and other factors, humidity data are often not as good as expected, so high-resolution humidity fields are of great interest and have been the object of desire in the research field and industry. This study presents a novel super-resolution algorithm for humidity fields based on the Wasserstein generative adversarial network(WGAN) framework, with the objective of enhancing the resolution of low-resolution humidity field information. WGAN is a more stable generative adversarial networks(GANs) with Wasserstein metric, and to make the training more stable and simple, the gradient cropping is replaced with gradient penalty, and the network feature representation is improved by sub-pixel convolution, residual block combined with convolutional block attention module(CBAM) and other techniques. We evaluate the proposed algorithm using ERA5 relative humidity data with an hourly resolution of 0.25°×0.25°. Experimental results demonstrate that our approach outperforms not only conventional interpolation techniques, but also the super-resolution generative adversarial network(SRGAN) algorithm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.3
• /
• pp.414-426
• /
• 1997

Numerical computations were conducted to characterize the three-dimensional laminar flow through an injector orifice having an inclined angle of 30 .deg.. For this study, the incompressible Navier-Stokes equations in generalized curvilinear coordinates, using a pseudocompressibility approach for continuity equation, were solved. The computations were performed using the finite difference implicit, approximately factored scheme of Beam and Warming and multi-block grids of complete continuity at block interfaces. The multi-block computations were validated for the steady state using direct comparison of multi-block solutions with equivalent single-block ones, including 2-D 180.deg. TAD and 3-D 90.deg. pipe bend. The comparisons between the numerical solutions and the flow field measurements for a tube with sudden contraction were presented in this work for solution validation. Computational results showed the nature of complex flow fields within the inclined injector orifice, including strong pressure-driven secondary flows in the cross stream induced by the effect of streamline curvature. In addition, asymmetric secondary flows were induced in the Reynolds number range above assumed laminar flow regime considered. However, turbulence calculations and grid dependency studies are needed for more accurate computations.

• Progress in Medical Physics
• /
• v.1 no.1
• /
• pp.61-68
• /
• 1990

We have designed the calculation model(AMC method) of electron output for the cut-out fieldsand studied the influence of shielding block size. The output of electron was measured in the water phantom at dmax, for 20 $\times$ 20cm$^2$ cone size electron beams from CL/1800 linear accelerator(Varian, USA), Which generates the energy of 6, 9, 12, 15 and 18MeV electron beams. The shielding blocks were rectangular or squre shaped, low melting point alloy. We can predict the output from the arbitrarily rectangular shaped block within 1% error. by using the AMC method, which considers the contribution of the collimator(block) scatter and the phantom scatter.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.800-808
• /
• 1998

In this study the thermal stress distribution and deformantion characteristics resulting from the nonuniform temperature fields of the cylinder block of a light 3-cylinder 4-stroke gasoline engine were analyzed using the 3-dimensional finite element method. The temperature distributions req-uisite for the thermoelastic behavior alalysis were obtained from the steady-state heat conduction analysis performed on the basis of experimental data. in order to examine the effect of a ceramic material the cylinder liner was replaced by the silicon nitride($Si_{3}N_{4}$) and its thermal behaviors were compared with those of the original block.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.843-846
• /
• 2000

An optical flow-based motion estimation algorithm is proposed for video coding. The algorithm uses block-matching motion estimation with an adaptive search region. The search region is computed from motion fields that are estimated based on the optical flow. The algorithm is based on the fact that true block-motion vectors have similar characteristics to optical flow vectors. Thereafter, the search region is computed using these optical flow vectors that include spatial relationships. In conventional block matching, the search region is fixed. In contrast, in the new method, the appropriate size and location of the search region are both decided by the proposed algorithm. The results obtained using test images show that the proposed algorithm can produce a significant improvement compared with previous block-matching algorithms.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.89-94
• /
• 2002

During radiation therapy with electron beam to eyelid, we must keep the minimal dose on eyeball as possible. especially in the treatment of Sebaceous gland carcinoma, Squamouse cell ca., and basal cell ca. of eyelid and low grade MALToma etc. But if radiation field covered the upper & lower eyelid, it makes a cataract on lens of treated eye, in late complications. Now we reports the advantages of Tungsten eyeball shielding block compare to previously used lead block. with BOLX-I material, we made a eyeball model and measured the absorbed dose of 6MeV & 9MeV electron hem at 6 point of eyeball model with TLD chip. And compare the absorbed dose to previously lead block and other types of Tungsten eyeball shielding block.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.403-406
• /
• 1999

Among the compression methods of moving picture information, a motion estimation method is used to remove time-repeating. The Block Matching Algorithm in motion estimation methods is the commonest one. In recent days, it is required the more advanced high quality in many image processing fields, for example HDTV, etc. Therefore, we have to accomplish not by means of Partial Search Algorithm, but by means of Full Search Algorithm in Block Matching Algorithm. In this paper, it is suggested a structure that reduce total calculation quantity and size, because the structure using Bit Plane select and use only 3bit of 8bit luminance signal.