• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.453-458
• /
• 2001

Analysis of radiation heating system for producing 60" size PDP panels was carried out using $RADCAD^{TM}$ software. Optimum arrangement of infrared heating elements was found to obtain uniform temperature distribution in PDP panel during heating. Heating capacity of each heater was determined to obtain an appropriate maximum panel temperature. Parametric study to find the effect of design parameters such as the thermophysical and optical properties of glass and cooling system was carried out. As a reference system, about 35 kW heating capacity was chosen to obtain about 800 K maximum panel temperature after 30 minute heating. The maximum temperature difference in panel was below 20 K. The maximum/minimum and its difference in the panel were very sensitive to the variation of the emissivity of glass and cooling block.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1270-1274
• /
• 2003

The objective of this paper is to introduce the standard of evaluation methods and fatigue test for linear motion rolling bearing. In particular, attention well be given to the list of evaluation and fatigue results in this paper. The life of a linear motion rolling bearing is given by the length of distance covered between the connection parts before the first evidence of fatigue develops in the material of one of the raceways of rolling elements. The main factors that contribute to fatigue failures include: Number of load cycles experienced; Range of stress experienced in each load cycle; Mean stress experienced in each toad cycle; Presence of local stress concentrations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.38-40
• /
• 2007

In this paper, we propose a novel architecture, which is based on DCT (Discrete Cosine Transform), for ME (Motion Estimation) and MC (Motion Compensation). The traditional algorithms of ME and MC based on DCT did not suffer the advantage of the coarseness of the 2-dimensional DCT (2-D DCT) coefficients to reduce the operational time. Therefore, we derive a recursion equation for transform-domain ME and MC and design the structure by using highly regular, parallel, and pipeline processing elements. The main difference with others is removing the IDCT block by using to transform domain. Therefore, the performance of our algorithm is more efficient in practical image processing such as DVR (Digital Video Recorder) system. We present the simulation result which is compare with the spatial domain methods. it shows reducing the calculation cost. compression ratio. and peak signal to noise ratio (PSNR).

• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.517-539
• /
• 2006

Friction problems involving rubber components are frequently encountered in industrial applications. Their treatment within the framework of numerical simulations by means of the Finite Element Method (FEM) is the main issue of this paper. Special emphasis is placed on the choice of a suitable material model and the formulation of a contact model specially designed for the particular characteristics of rubber friction. A coupled thermomechanical approach allows for consideration of the influence of temperature on the frictional behavior. The developed tools are implemented in the commercial FE code ABAQUS. They are validated taking the sliding motion of a rubber tread block as example. Such simulations are frequently encountered in tire design and development. The simulations are carried out with different formulations for the material and the frictional behavior. Comparison of the obtained results with experimental observations enables to judge the suitability of the applied formulations on a structural scale.

• 전자공학회논문지A
• /
• 제30A권3호
• /
• pp.67-75
• /
• 1993

In many practical applications of systolic array, it is common that the problem size(n) is larger than the array size(M). In this case, the problem has to be partitioned into block to fit into the array before it is processed. This paper presents a problem partition method for dynamic programming and 2-dimensional systolic array suitable for it. Designed array has two types of array configur-ation for processing the partitioned problem. The queue is designed for storing and recirculating the intermediate results in the correct location and time. The number of processing elements and queues required are M(3M+1)/2, 4M respectively. The total processing time is 2(M+1)+(n+10M+3)(n/M-1)(n/M-1)/6.

• 한국실내디자인학회논문집
• /
• 제24권1호
• /
• pp.160-168
• /
• 2015

The subject of this research is to analyze the design characteristics of outdoor spaces in Good Design awarded apartment complexes in the past decade. The results are as follows. First, the overall outdoor space design theme, one of the conceptual elements, is focused on both 'nature' and 'story of various subject' that are similar to each other. Second, the case study object with the visual openness, which is secured between apartment blocks, is shown frequently in case box-shaped apartment blocks are arranged in a row. However, in case of Y-shaped block arrangement, the visual openness secured within an apartment complex is considered more important. Third, according to the result of circulation/ inner path element, the most frequently appeared inner path form is a grid pattern with straight path emphasis. While apartment complexes with the parking lot on the ground are only 3 out of 18 cases, it with circulation path for vehicle on the ground level are over 61%. Fourthly, the design characteristic of social space of physical outdoor design appears to be 'central link facility type'. In this case, the central community facilities are more likely to be combined with various functions, such as green, water, and social connection. Fifthly, in case of natural space, most of the apartment cases are shown over 45% green area ratio with wide green and water space provision. Especially, the differentiation is to provide the space where can stimulate a resident's participation.

• International Journal of Contents
• /
• 제5권4호
• /
• pp.81-87
• /
• 2009

In the midst of a continued discourse and development concerning design education and its impact on innovation and creativity, I believe that design education still holds the key to enhancing design methodology while increasing creativity by having students take on several creative roles in an interactive and enjoyable studio course. Clearly, there exist impediments that block the creative process in our standard track in design education; however, a course entitled "The Creative Workshop" can overcome such obstacles. Through this course, a student can learn the essential skills of a designer: inventive thinking, a sense of aesthetics, and a spirit of collaboration. In addressing each of the three essential elements, this course has devised role-plays in the way of projects. Simply put, students will be required to demonstrate and, therefore, express their unique creativity that may have otherwise gone muted. Such creative expression can take form in a low stakes, open forum that heralds the invaluable attribute in design such as creative freedom. As a result, the true spirit of creativity is fostered rather than mere aesthetics and styling. Moreover, through role plays, the focus shifts its center from design, allowing each student to explore the uncharted areas of one's own creativity which may come naturally to some extend while disconcerting to others. It may prove particularly uncomfortable for Korean students whose ideas about education have been directly connected to the strict and regimented school system that stresses adherence to standardization such as the national college entrance exam. This course, therefore, is aimed stretch the scope and scale of students' creativity as they learn to collaborate on role plays, utilizing diverse skills from various disciplines.

• 지질공학
• /
• 제5권2호
• /
• pp.167-179
• /
• 1995

서울 지하철 8호선 설계시는 지보형식 설정을 위한 정량적 기준으로 RQD,N치 및 탄성계수의 3가지 요소들만이 사용되었다. 이러한 요소들로 얻어진 지보형식은 지질이나 불연속면의 방향성, 불연속면의 특성을 정량화 하지 못하였기 때문에 지보형식의 결정 및 안정성에 문제가 있었다. 따라서 보다 많은 정량적인 요소들을 포함시키고 경제적인 지보형식을 결정하기 위해 8호선 성남구간을 선택하여 총 1745개소에서 RMR에 의한 암반분류와 374개소에서 Q-system에 의한 암반분류를 실시 하였으며, 이들에 의해 구해진 지보형식과 8호선 설계시의 표준지보형식을 비교검토하였으며, 또한 지질, 지질구조 및 지형에 따른 암반평점과의 관계를 검토하였다. 지보형식을 비교 검토한 결과 PD-4혹은 PS-4로 설계된 표준지보형식은 4-6개의 지보형식으로 세분되어져야 하며 암반평점은 단층 및 절리와 같은 지질구조가 발달된 곳과 계곡부가 대체로 암반평점이 낮고 굴착심도가 깊은 산악지역은 높으며 상록구간은 이들의 중간정도의 양상을 보인다.

• 한국의상디자인학회지
• /
• 제23권3호
• /
• pp.57-71
• /
• 2021

When teaching traditional pattern-themed textile design, it has been found that many students struggle during the investigation stage of traditional patterns and complete the development of patterns in relatively simple layout methods, such as block patterns and half drop patterns. Until now, digital textile design textbooks lack content on how to develop patterns. Judging that the current teaching method leads to difficulties in developing a new sense of textile design, this study focused on Heesch-tiling tessellation and software called TESS, a program that can transform patterns themselves. This study is an academic study on the methodology of first developing patterns through TESS, a tessellation program developed for elementary school students in the U.S., and then applying various lines and colors to the complete patterns and textures using Adobe Illustrator. In this study, the concept, formative characteristics, and generative principles of Heesch-tiling tessellation were examined, and the process of developing new patterns using the TESS program, which can be used to create patterns through Heesch-tiling principles, was intended to help in textile design education. Therefore, after analyzing the comprehensive concepts and principles of tessellation, the next step is to understand the principles and the characteristics of pattern making only for Heesch-tiling tessellation, and then ultimately to develop new patterns. While patterns using traditional tessellation layouts have been characterized mainly by repeated geometric shapes, Heesch-tiling tessellation can express surrealistic attributes, such as those by painter M. C. Escher or style elements such as those in neo-pop.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.464-471
• /
• 2012

Self-excited induction generators (SEIG) are gaining importance as compared to conventional generators due to their capability toconvert wind energy into electrical energy for a wide range of variation in operating speed. The performance of such a generator depends upon the load, rotor speed and excitation capacitance. Therefore, depending upon the operating conditions, the output voltage and frequency of this machine goes on changing and this imposes a restriction on its usage. In order to maintain constant voltage and frequency, it need controllers, which make the circuit complicated and also increases the overall cost of power generation. This paper presents a simple controller to regulate the output voltage and frequency of SEIG for variation in its operating conditions due to any change in load, rotor speed and excitation capacitance (R, N, C) and their combination. The controller presented is simple in design, user friendly and is also less expensive, as the elements used in the controller are only resistors, inductors and capacitors. A block of SEIG for steady state operation is also modeled and presented in this paper. SEIG, Controller and other components are modeled and simulated using Matlab/Simulink.