• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.7-13
• /
• 2011

This paper presents a Time-to-Digital Converter which is a key block of an All-Digital Phase Locked Loop. In this work, a Vernier Delay Line is added in a conventional Gated Ring Oscillator, so it could get multi-phases and a high resolution. The Gated Ring Oscillator uses 7 unit delay cell, the Vernier Delay Line is used each delay cell. So proposed Time-to-Digital Converter uses total 21 phases. This Time-to-Digital Converter circuit is designed and laid out in $0.13{\mu}m$ 1P-6M CMOS technology. The proposed Time-to-Digital Converter achieves 26ps resolution, maximum input signal frequency is 100MHz and the digital output of proposed Time-to-Digital Converter are 8-bits. The proposed TDC detect 5ns phase difference between Start and Stop signal. A power consumption is 8.4~12.7mW depending on Enable signal width.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.27 no.1
• /
• pp.39-47
• /
• 2016

Objectives: The aim of this study was to examine the association between current suicidal or violent behavior and deficits of specific neurocognitive variables in child and adolescent inpatient samples diagnosed with mood disorder. Methods: A retrospective review of the charts of mood disorder patients hospitalized at Samsung Medical Center between April 2004 and April 2015 was conducted. Child and adolescent patients aged between 10 and 18 years old and those who finished neurocognitive function testing during their hospitalization were included. Among them patients whose full scale IQ was between 85 and 115 were selected (N=111). Participants were first divided into two age-groups-group Y ($10{\leq}age{\leq}15$, N=54) and group O ($16{\leq}age{\leq}18$, N=57)-because neurocognitive function test tools were different according to age [Wechsler Intelligence Scale for Children (WISC) for 10 to 15-year-old patients, Wechsler Adult Intelligence Scale (WAIS) for 16 to 18-year-old patients]. They were then divided according to their suicidal or violent behavior-non suicidal/violent group (NG), suicidal group (SG), violent group (VG), and both suicidal/violent group (BG). The Child Behavior Checklist (CBCL) was checked for measurement of participants' behavior and the Gordon Diagnostic System was checked for measurement of their attention efficiency. Kruskal-Wallis Test and Tukey test was used to determine the differences in neurocognitive function between groups. Results: O-SG patients showed lower scores on the comprehension subscale of WAIS-III than O-NG patients (${\chi}^2=8.454$, p=.015). O-VG patients showed lower scores on the block design subscales of WAIS than O-SG patients (${\chi}^2=7.496$, p=.024). Y-VG patients showed higher scores in aggressive behavior, externalizing problems, and total problems scores of CBCL. Conclusion: This study showed relationship between specific neurocognitive deficits and suicidal or violent behavior. These relationships were significant in relatively older adolescents.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.293-300
• /
• 2012

This experiment was carried out to compare the agronomic characteristics, forage yield and quality of sorghum ${\times}$ sudangrass hybrid at two locations (Sungju and Cheonan) in 2009. The experiment was a randomized complete block design with three replications. The eight recommended hybrids used in this experiment were 'Sordan 79', 'SX17', 'Honey chew', 'Honey grazer', 'G7', 'Jumbo', 'Green star' and 'GT56' hybrids. The heading of four hybrids were headed at both region, Sungju and Cheonan. There are no big differences in general agronomic characteristics among hybrids, but brix scale of heading and BMR (brown mid rib) types were higher than those of other hybrids. Dry matter (DM) and plant height of heading type hybrids were higher than those of headless types. The fresh, DM and TDN (total digestible nutrients) yields of heading type hybrids were also higher than those of headless types, and BMR types were lower than others. The crude protein and crude ash contents of headless hybrids were higher than those of heading hybrids, while its non-fiber carbohydrate (NFC) content showed the opposite results. The acid detergent fiber (ADF) and NFC contents of BMR types were lower than others. The results of this experiment indicates that heading hybrids were more higher than headless hybrids in the agronomics and forage yield of sorghum ${\times}$ sudangrass. However heading types were lower headless types in quality of sorghum ${\times}$ sudangrass. And BMR hybrids were also high quality of sorghum ${\times}$ sudangrass hybrid because of higher brix content and lower ADF content among tested hybrids.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.229-236
• /
• 2012

This experiment was conducted to evaluate agronomic characteristics and forage productivity of italian ryegrass cultivars at Seongju in the Kyeongbuk from 2010 to 2012. The experiment was arranged in randomized complete block design with three replications. Italian ryegrass cultivars were seeded on Oct. 12 in 2010 and Oct. 3 in 2011. The early-medium maturing cultivars were harvested on 29 Apr. and the medium late ones were harvested on 4 May in 2011. In 2012, the early-medium cultivars were harvested on 28 Apr. and medium late ones were harvested on 12 May. DM (dry matter) yield of the early-medium maturing cultivars 'Yeonbong3', 'Seongnong', 'Winter Hawk', 'Pride' and 'Kowinnearly' was 9,850, 9,778, 9,486, 9,363 and 9,267 kg/ha and DM yield of those were significantly higher (p<0.05) than other seven cultivars or ones. DM yield of the medium-late maturing cultivars 'Tetragold', 'Hwasan 101', 'Jumbo', 'Sungrazer', 'Master', 'SelectIV' and 'KB Royal' was 9,542, 9,492, 9,103, 8,981, 8,903, 8,870 and 8,681 kg/ha and DM yield of those were higher (p<0.05) than other three. Cold tolerance for 'Hwasan 101' was higher than others, in medium-late maturing cultivars. According to the results obtained from this study, it is suggested that early-medium maturing cultivars would be recommendable for DM production.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.176-182
• /
• 2020

Purpose: To evaluate the effects of load direction, number of implants, and alignment of implant position on stress distribution in implant, prosthesis, and bone tissue. Materials and Methods: Four 3D models were made to simulate posterior mandible bone block: two implants and 3-unit fixed dental prosthesis (FDP) with a pontic in the center (model M1), two implants and 3-unit FDP with a cantilever pontic at one end (model M2), FDP supported by three implants with straight line placement (model M3) and FDP supported by three implants with staggered implant configuration (model M4). The applied force was 120 N axially or 120 N obliquely. Results: Peak von Mises stresses caused by oblique occlusal force were 3.4 to 5.1 times higher in the implant and 3.5 to 8.3 times higher in the alveolar bone than those stresses caused by axial occlusal force. In model M2, the connector area of the distal cantilever in the prosthesis generated the highest von Mises stresses among all models. With the design of a large number of implants, low stresses were generated. When three implants were placed, there were no significant differences in the magnitude of stress between staggered arrangement and straight arrangement. Conclusion: The effect of staggering alignment on implant stress was negligible. However, the number of implants had a significant effect on stress magnitude.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.431-435
• /
• 2011

This paper presents optimized searching technique to improve the performance of H.264/AVC. The proposed CAVLC encoder uses forward and backward searching algorithm to compute the parameters. By zero-block skipping technique and pipelined scheduling, the proposed CAVLC encoder can obtain better performance. The experimental result shows that the proposed architecture needs only 66.6 cycles on average for each $16{\times}16$ macroblock encoding. The proposed architecture improves the performance by 13.8% than that of previous designs. The proposed CAVLC encoder was implemented using VerilogHDL and synthesized with Megnachip $0.18{\mu}m$ standard cell library. The synthesis result shows that the gate count is about 15.6K with 125Mhz clock frequency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.693-699
• /
• 2016

The simulators for pump operation developed by domestic or overseas research have been developed for dynamic analysis or operator training purposes. However, previous developed simulators focused on the operators so they are unsuitable for logic designers or commissioning engineers who need to change the operation conditions or logics arbitrarily. In addition, the simulator for two or more condensate pumps' operation, which can be used easily by plant designers or operators, has not been developed. Accordingly, this paper suggests a simulation method that can be used easily for plant designers or operators using MATLAB Simulink. This suggestion helps users who can use MATLAB to implement ANSI/ISA S5.2, which is applied mainly for DCS (Distributed Control System). In addition, to implement the logics specified in the CODE, Sub-Systems were created for the block and evaluated to determine if they can be used in the simulator. In the working level stage using the suggested method, all error possibilities that might occur during the three pumps' rotation operation could be verified with the suggested simulator during the design stage or before operation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.2
• /
• pp.105-109
• /
• 2004

Field studies were conducted in the southeastern Korea ($36^{\circ}$N) on a commerce silt loam soil at paddy field. Seed were manually planted on 16 July 2003. Plants were planted with plant densities of 70${\times}$10 cm (row width x plant spacing), 50 x 10 cm, and 30 ${\times}$10 cm. Two seedlings per hill were taken prior to V3 stage. Fertilizer was applied prior to plant at a rate of 30-30-34 kg (N-$\textrm{P}_2\textrm{O}_5$-$\textrm{K}_2\textrm{O}$) per ha. Experimental design was a randomized complete block in a split plot arrangement with three replications. Yield from different planting densities responded similarly in three soybean cultivars and increased when planting density increased. Somyeongkong showed the highest increasing rate of yield about 26% by 338 g $\textrm{m}^{-2}$ at 30 x l0 cm compared to yield of conventional planting density (70 x 10 cm). Also, the planting density significantly affected pod and seed number and seed weight, but not seed per pod. The tallest plant appeared at 30${\times}$10 cm. The change of leaf area according to days after emergence showed differently in soybean cultivars. The highest and lowest total dry matter production per square meter appeared at 30 x 10 cm and at 70 x 10 cm, respectively. Crop growth rate (CGR) showed greater at R3∼R4 stages compared with V7∼R2 or R2∼R3 growth stages and showed the greatest at 30 x 10 cm in three soybean cultivars. As late planted soybean, there was a significant relation between seed yield and CGR, and leaf area index (LAI) according to planting densities at before and after the flowering stage. Relationship between seed yield and CGR in three planting densities showed a highly significant positive relation ($\textrm{R}^2$=0.757) at R3 to R4 stages, and significant relations ($\textrm{R}^2$=0.505, 0.617) at V7 to R2 and V2 to V3. Also, there was a highly significant positive difference between seed yield and LAI during R3 to R4 and R2 to R3 stages.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.81-88
• /
• 2020

Flight data recorder is a equipment that records data required for investigation of aircraft accidents and should be developed in compliance with the ED-112A standard. Unlike general data storage device, flight data recorder must be able to recover data after an aircraft accident, requiring a housing and a memory board to protect data in extreme environments. To attain this performance, we designed a housing that can withstand the test by analyzing the physical environment of the impact, shear/tensile, penetration resistance and static crush test of the crash survival test and minimized the size and weight compared to the existing one in consideration of the installation of the aircraft in this paper. Insulation material and thermal block material were applied to endure high and low temperature fire so that the internal temperature does not rise above 150℃ even in 260℃, 10 hour environment. In addition, the memory board is designed to minimize the size and we devise a hoping programming method to prevent continuous data loss of more than 16 seconds. Through this, Crash protected memory module that satisfies ED-112A was completed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6247-6253
• /
• 2015

This paper presents the transient-response improved LDO regulator based on parallel error amplifiers. The proposed LDO regulator consists of an error amplifier (E/A1) which has a high gain and narrow bandwidth and a second amplifier (E/A2) which has low gain and wide bandwidth. These amplifiers are in parallel structure. Also, to improve the transient-response properties and slew-rate, some circuit block is added. Using pole-splitting technique, an external capacitor is reduced in a small on-chip size which is suitable for mobile devices. The proposed LDO has been designed and simulated using a Megna/Hynix $0.18{\mu}m$ CMOS parameters. Chip layout size is $500{\mu}m{\times}150{\mu}m$. Simulation results show 2.5 V output voltage and 100 mA load current in an input condition of 2.7 V ~ 3.3 V. Regulation Characteristic presents voltage variation of 26.1 mV and settling time of 510 ns from 100mA to 0 mA. Also, the proposed circuit has been shown voltage variation of 42.8 mV and settling time of 408 ns from 0 mA to 100 mA.